Pothole detection and its severity measurement is still an important challenges in urban infrastructure management, where late maintenance directly contributes to vehicle damage, road accidents, and escalating repair costs. Existing automated approaches depend on 2D RGB images and cannot measure physical depth of potholes. In this paper, we present a depthaware pothole detection framework and then compare five architectures: YOLOv8n, YOLOv8nSeg, YOLOv9t, RTDETRL, and RTDETRX for RGB-D sensor fusion-based detection and automated depth measurement. A custom offline augmentation pipeline is used here to simulate adverse road monitoring conditions. All models are trained on the PothRGBD dataset with an 80% training and 20% validation split and evaluated using Precision, Recall, mAP@50, and mAP@50_95. Before measuring the depth data, all depth maps are corrected for camera tilt using RANSAC ground-plane orthorectification and all zero-valued sensor pixels are cast to NaN before any statistic is computed. YOLOv8nSeg achieves the highest mAP@50 of 0.9556 and mAP@50_95 of 0.6758 with the most accurate depth estimate of 2.96 cm with the pixel-precise Dseg algorithm. YOLOv8n achieves the fastest inference at 3.6ms. RTDETRX achieves the highest detection confidence at 92.70%. An important finding is that even after full RANSAC orthorectification, bounding box models overestimate pothole depth by 0.16 to 0.21 cm compared to pixel precise segmentation masks. This confirms that the pavement inclusion bias is structural rather than a calibration artifact.
Automated tea leaf disease classification supports precision agriculture, yet deploying accurate models on edge devices remains challenging under tight compute budgets. Self-supervised vision foundation models such as DINOv2 provide strong features but are too large for field deployment, while lightweight models trained from scratch on small agricultural datasets often underfit. We study cross-architecture knowledge distillation (KD) from a fine-tuned DINOv2 teacher (Vision Transformer) to a compact bidirectional Visual State Space Model (LVSSM) student, an underexplored direction because the architectures use fundamentally different token-mixing mechanisms. We identify and fix two training-stability problems that prevent the from-scratch SSM student from learning on limited data: a single large patch-embedding convolution and a fusion layer that severs the residual path. With a progressive convolutional stem and gated bidirectional selective-scan block, the 4.45M-parameter student trains stably. Across three seeds, temperature-scaled logit distillation raises test accuracy from 92.32+/-2.14% to 95.41+/-1.17% (best single run: 96.20%; macro-F1: 94.45%), a +3.09 percentage-point mean gain. The student uses 5.0 times fewer parameters than the 22M-parameter teacher while retaining 98.3% of its accuracy. Ablations show that intermediate feature-alignment losses reduce accuracy, making simple logit-level KD the strongest configuration. A fair from-scratch comparison shows the gain is specific to students that start below the teacher. We report per-class metrics, confusion matrices, bootstrap confidence intervals, and FLOPs/latency measurements, and discuss limitations including the single-dataset scope and simplified non-official SSM implementation.
Large-kernel Convolutional Neural Networks (CNNs) deliver remarkable performance in vision tasks by significantly expanding receptive fields, yet their quadratic parameter growth critically impedes storage-efficient edge deployment. While existing efficient architectures adopt parameter-efficient depthwise separable convolution backbones that leverage techniques like low-rank approximation and weight sharing to compress depthwise convolutions, we identify a critical oversight: pointwise convolutions dominate parameter volume (>87% in models like RepLKNet-31B) and constitute the primary deployment bottleneck on resource-constrained edge devices. This results in prohibitive storage costs and severe memory-loading constraints on resource-limited devices (e.g., smartphones with 4-12 GB Random Access Memory (RAM)). To overcome this, we propose Channel Group-Shared (CGS) low-rank approximation, a novel Singular Value Decomposition (SVD)-based parameter-sharing strategy. CGS constructs a structured low-rank paradigm isomorphic to SVD decomposition, comprising shared (high-parameter-cost) down/up-projection matrices across channel groups within a layer and channel-group-specific (low-parameter-cost) scalable diagonal matrices. This group-sharing design achieves significant parameter reduction. Extensive experiments demonstrate that large-kernel CNNs (RepLKNet, ConvNeXt, SLaK) enhanced with CGS strike an empirically favorable balance between competitive performance and substantially reduced storage costs. Crucially, by alleviating storage constraints, reducing memory bandwidth pressure during loading, and minimizing model loading latency, CGS enables the feasible deployment of pre-trained large-kernel CNN models on edge devices, thereby bridging the gap between high-performance vision models and practical edge deployment.
Transformer-based object trackers are renowned for their strong performance, yet dense token processing often leads to prohibitive computational cost, limiting real-time deployment on edge devices. While recent works explore token pruning to reduce computation, they often stop short of an end-to-end sparse pipeline, as early-layer token scores can be noisy without a motion prior, and many trackers ultimately fall back to dense reshaping to feed the dense prediction head that partially negates the savings. We introduce Motion-aware Sparse Tracker (MaST), a sparse tracking framework that makes sparsity effective from tokens to boxes. First, MaST injects a lightweight motion prior to refine cross-attention-based importance scores, enabling earlier and more stable token reduction in the search region. Second, we introduce a natively sparse prediction head that operates directly on the retained unstructured tokens with a score-first, regress-once design, eliminating dense padding/reshaping and reducing redundant computation. Extensive experiments on multiple benchmarks demonstrate that MaST establishes new state of the art among lightweight trackers, where MaST-tiny attains 63.8 AUC on LaSOT and 80.1 SUC on TrackingNet, surpassing the prior best AsymTrack-S by +1.0 AUC and +2.2 SUC while running at 152 FPS on Jetson Nano, nearly twice as fast as AsymTrack-S at 88 FPS. Code is available at https://github.com/TsingWei/MaST.
Ranjan Sapkota, William Bu, Chen Chen +2cs.CV cs.AI
Accurate identification of early-stage apple fruitlet anatomical structures, including the calyx, fruitlet body, and peduncle, is essential for robotic thinning, crop-load management, and other precision orchard operations. This study presents a lightweight multimodal vision-language framework that adapts TinyCLIP for fine-grained fruitlet anatomy classification in complex orchard environments. A dataset of 600 high-resolution RGB images collected from Scilate and Scifresh apple orchards was converted into 224 x 224 image patches and annotated for three anatomical classes. Domain-specific language prompts, such as ``a photo of a class,'' were used to guide multimodal alignment between orchard imagery and horticultural structures. A sliding-window inference strategy with a stride of 112 pixels aggregates patch-level predictions into spatial heatmaps, enabling interpretable whole-image localization of fruitlet components relevant to robotic thinning. Patch-level evaluation on an NVIDIA T4 GPU achieved F1-scores of 0.95 for calyx, 0.98 for fruitlet, and 0.85 for peduncle, with a macro-F1 score of 0.93. Deployment-oriented optimization using ONNX and TensorRT enabled efficient inference on NVIDIA Jetson hardware, preserved accuracy under INT8 quantization, and supported model sizes of approximately 127-137 MB with millisecond-level patch inference. These results demonstrate that lightweight vision-language models can provide interpretable and edge-deployable perception for automated fruitlet analysis and future robotic thinning systems. The source code and implementation details are publicly available at https://github.com/WilliamBu1/A-Lightweight-Vision-Language-Model-for-Early-Stage-Fruitlet-Classification-in-Apple-Orchards.
Paul Julius Kühn, Duc Anh Nguyen, Saptarshi Neil Sinha +2cs.CV
Real-time 6DoF object pose estimation on resource-constrained hardware remains challenging, as accurate correspondence-based and refinement pipelines typically rely on non-differentiable PnP/RANSAC stages or costly iterative refinement, while recent foundation-model-based approaches incur inference costs that are prohibitive for edge deployment. We present TinyDETR-Pose, a lightweight, end-to-end, single-stage framework that jointly detects objects and regresses their full 6D pose in a single forward pass. Built on the efficient LW-DETR architecture, TinyDETR-Pose formulates detection and pose estimation as a set-prediction problem and attaches dedicated MLP heads for rotation, monocular depth, and projected object center regression to each decoder query, eliminating the need for PnP, NMS (non-maximum suppression), or iterative pose refinement. Object symmetries are handled through a ADD-S loss applied uniformly to all objects, without the need for object-specific loss schedules or separate geodesic/ADD supervision. In addition, predictions are assigned to ground truth using a symmetry-safe Hungarian matcher based on class and 2D spatial cues, yielding stable assignment under symmetry and depth ambiguity. On YCB-V, TinyDETR-Pose achieves a comparable ADD-S AUC of 85.9, while requiring up to 72.7% fewer parameters than other DETR-based single-stage pose-estimation approaches. Due to its compact design, TinyDETR-Pose runs in real time and achieves an inference latency of only ~4.5 ms per frame on an NVIDIA Jetson Nano using TensorRT, demonstrating that accurate end-to-end transformer-based 6D pose estimation can be made practical for edge deployment.
Junseo Kim, Uraz Odyurt, Amirreza Yousefzadehcs.CV cs.LG
Vision Transformers (ViTs) demonstrate exceptional performance in computer vision but suffer from large parameter counts and quadratic computational complexity, severely limiting their deployment on resource-constrained edge hardware. While recursive weight-sharing reduces parameter counts and token merging mitigates computational and memory bottlenecks, integrating these two paradigms without costly retraining is non-trivial, leaving this intersection largely unexplored. We propose MergeOver, a post-training approach that integrates Token Merging (ToMe) into the recursively weight-shared Sliced Recursive Transformer (SReT). Through an Unmerge tracking stack, constraint-safe merge-rate adjustment, and synchronised token-mass tracking across spatial permutations, MergeOver resolves the spatial and merging constraints of this integration. We further employ a stage-wise single-shot schedule that performs token reduction at the first block of each stage and maintains a fixed sequence length throughout its subsequent recursive iterations. Benchmarked on ImageNet-1K, our selected configuration reduces top-1 accuracy by 1.47 percentage points. On the GPU, it reduces peak activation memory by 37.3% and 38.4% at batch sizes 1 and 16, while throughput decreases by 21.7% at batch size 1 but increases by 21.7% at batch size 16. On a Raspberry Pi 5 (ARM CPU), it reduces latency by 2.4% and 17.6% at batch sizes 1 and 16. These results show that MergeOver can recover a meaningful part of the throughput and memory cost that recursive weight-sharing introduces, without retraining, and provides a baseline for combining token merging with hierarchical recursive transformers.
Fabric inspection in the garment industries of low-income economies remains largely manual, and commercial vision systems are priced beyond most small and medium mills. Because defects are sparse under controlled production, a natural response is a cascade: screen every frame with a cheap anomaly detector and invoke a full detector only on suspicious frames. We build such a cascade for four knit-fabric defect classes and deploy it end-to-end on an NVIDIA Jetson Nano with TensorRT FP16. Stage 1 is a compact convolutional autoencoder with decoder attention gates, an edge-weighted reconstruction loss, and feature-level distillation from a frozen YOLOv5n teacher; Stage 2 is YOLOv5n, invoked only on flagged frames. On a 249-image benchmark disjoint from detector training (20 defective, 229 non-defective), Stage 1 at a recall-prioritised threshold flags all 20 defective images (95% CI 0.83-1.00) at a false-positive rate of 49.3% (113/229), reducing false positives by 19.3% relative to a plain autoencoder (p=0.011). The parallel pipeline reaches 13.45 FPS against 9.86 FPS for a sequential YOLO-only loop. Our central finding comes from decomposing that 1.36x: 91% of it is attributable to overlapping JPEG decode with inference rather than to the cascade, which contributes only a 5.1% inference reduction at the measured forwarding rate p = 0.534. We further show that forwarding here is false-positive-limited rather than prevalence-limited - 85% of forwarded frames are false alarms - and quantify the 29-45% inference reduction attainable under tighter calibration. We report this as a caution for cascade speedups measured without controlling the data path, and position the system as AI-assisted triage rather than autonomous acceptance.
Automated plant species identification from citizen-science imagery is an established, demanding fine-grained recognition problem: large taxonomic label spaces, visually similar species, and long-tailed observations require real model capacity, while field use constrains memory, latency, and power. Model size is only part of the deployment cost: intermediate activations held in memory during inference and platformdependent execution behavior matter too, so compact recognition must be assessed on target hardware rather than through complexity metrics alone. We present BoltNet, an ultra-lightweight fully convolutional architecture combining a Spatial Redistribution Bottleneck and Logit PreSampling to improve the tradeoff between predictive performance and model size in high-cardinality classification, and report the AccuracyCompression Tradeoff as a complementary diagnostic. On Pl@ntNet300K, BoltNet reaches 0.682 F1-score with 341K parameters (1.37 MB), the highest F1-score among evaluated models below 2 MB and close to substantially larger convolutional backbones. Model-only measurements on a Raspberry Pi 5, Jetson Orin Nano, and Hailo-8 characterize execution across CPU, GPU, and NPU platforms, where BoltNet is the most consistently efficient model, with the best FPS/W on the GPU and NPU and second-best on the CPU. Results on AIDERv2 and CLRS provide secondary evidence of transfer across environmental image-classification tasks. Code available at: https://codeberg.org/danielrossi/BoltNet
Edge platforms used for aerial observation must interpret aircraft imagery under limited memory, limited compute, and intermittent connectivity. This setting is difficult for standard RGB-only recognition models and general-purpose vision-language models, especially when calibrated thermal and LiDAR aircraft data are unavailable. We present TriCLE, an application-oriented tri-modal vision-language system for aircraft taxonomic grouping under edge constraints. From a single RGB aircraft image, TriCLE generates a structure-preserving FLIR-style thermal view and a pseudo-LiDAR depth projection, then fuses the aligned views with task instructions in a compact Qwen3-VL backbone. The model is aligned to an expert aircraft taxonomy based on propulsion, airframe family, size, design era, and configuration, so its outputs reflect engineering-relevant similarity rather than only surface appearance. We evaluate supervised fine-tuning, rotation-preserving SFT, and three policy-alignment strategies: GRPO, GSPO, and DAPO. Sequence-level GSPO gives the strongest validation performance, reaching 88.33\% validation accuracy and 0.91 weighted F1 on valid aircraft outputs. On a held-out aircraft test partition, GSPO achieves 78.00\% accuracy and 0.793 weighted F1 while preserving 94.00\% parseable output formatting. After 4-bit quantization and attention-memory optimization, the aligned 4B model fits an 8GB deployment target and processes each tri-modal triplet in 1.48 seconds. These results support TriCLE as a practical prototype for interpretable, edge-feasible aircraft grouping, while emphasizing the need for further validation on real aligned thermal and LiDAR sensor streams.
Unified multimodal object tracking has achieved remarkable robustness by leveraging complementary sensor data (e.g., RGB, Thermal, Depth), yet the heavy computational burden of state-of-the-art models hinders their deployment on resource-constrained edge devices. In this work, we identify the prediction head as a critical but often overlooked efficiency bottleneck. By strategically streamlining the decoder architecture, we unlock the potential for real-time inference but simultaneously introduce a capacity gap between the lightweight student and the heavy teacher. To resolve this, we conduct a systematic analysis of 17 distillation strategies and introduce a Dual-Alignment Distillation framework. Our key insight is that effective compression requires decoupling knowledge transfer into two complementary streams: (1) Spatial Representation Alignment, which employs feature distillation to sharpen the student's spatial focus on foreground targets ("Where to track"); and (2) Semantic Distribution Alignment, which utilizes logit-based distillation to align decision boundaries and transfer discriminative dark knowledge ("What to track"). Extensive experiments across five benchmarks demonstrate that our approach significantly outperforms complex state-of-the-art methods. Notably, our distilled model achieves 91.5% MPR on RGBT234 and operates at 54 FPS on a single RTX 4090, representing a 5x speedup over the teacher model while maintaining superior accuracy.
Tracking dense, homogeneous targets like schooling fish remains a major challenge for multiple object tracking due to extreme inter-individual homogeneity, severe physical clustering, and rapid non-rigid deformations. While heavy-backbone separated detection and embedding trackers like SU-T push accuracy boundaries using complex Re-Identification networks, their computational overhead prohibits edge deployment. Furthermore, these modules often fail when appearance features degrade under severe occlusions. To overcome this, we propose Tracking Identities with Dual-branch Elasticity (TIDE). Bypassing expensive appearance cues, TIDE utilizes the Adaptive Geometric Correspondence IoU, an association mechanism leveraging spatial and structural consistency to robustly handle complex morphological variations. Crucially, TIDE introduces system-level deployment elasticity, decoupling the algorithmic pipeline from strict hardware constraints. Evaluations on the MFT-Edge benchmark demonstrate that our Lightweight L-branch achieves a competitive HOTA of 28.43 using merely 20.47G FLOPs. This represents a 38.7-fold computational reduction compared to upper bounds like SU-T, directly facilitating real-time edge deployment. Concurrently, our Scalable S-branch establishes a 29.98 HOTA, successfully bridging the gap between high-precision cloud analysis and efficient edge tracking. The dataset and codes are released at https://vranlee.github.io/TIDE/.
We investigate lightweight raptor-species classification for real-time edge deployment in wind-turbine collision mitigation. Using DINOv2-L (304M parameters) as a teacher, we distilled three lightweight students (MobileNetV4, ViT-Small, and EfficientNet-B0). To reduce confusion between closely related species, we expanded the dataset to 12,519 images, including an increase in Steller's Sea Eagle images from 463 to 2,050 via video-frame extraction. Under a group split that separates samples at the video- and source-image level to mitigate source leakage at that granularity, the three-student ensemble achieved a macro recall of 0.935 +/- 0.004 over five distillation seeds (0.955 on a conventional image-level split, retaining 97.5% of the teacher's macro recall) with roughly one-eighth as many parameters. On a subset of 1,258 images disjoint from the former training images, White-tailed Eagle recall improved by up to 38.6 percentage points, while the rate at which it was misclassified as the Steller's Sea Eagle decreased from 61% to 15% of errors. TensorRT FP16 deployment of EfficientNet-B0 on an NVIDIA Jetson Orin Nano achieved 3.19 ms/image including host-device transfer (313 images/s), with 99.95% argmax agreement with FP32. In five-seed controlled comparisons, neither distillation (versus CE-only) nor the change from a DINOv2-L to a DINOv3-L teacher yielded a clear ensemble-level improvement; the primary gains stem from the dataset expansion and teacher re-fine-tuning.
Thanh Cong Le, Michal Szczepanski, Martyna Porebacs.CV
Vision Transformer detectors now approach the accuracy of CNNs but remain difficult to deploy on NPUs and microcontrollers because key components, including deformable attention, feature fusion, and nonlinear activation functions, are not natively compatible with integer arithmetic. Existing quantized detectors either retain operators such as Softmax, GELU, and LayerNorm or focus on heavyweight backbones, leaving lightweight detection transformers without an end-to-end integer implementation. We address this gap with I-LW-DETR, the first fully integer-only lightweight DETR, in which every operation in the forward pass, including transformer nonlinearities, is executed in integer arithmetic. I-LW-DETR is built upon three key components: a scale-preserving split convolution that assigns independent activation scale to each branch of the multi-scale projector; SD-ShiftGELU, a sign-dependent GELU approximation that preserves element-wise behavior while avoiding the accuracy degradation; and a constrained Shiftmax that maintains stable Softmax normalization. Experimental results demonstrate that the proposed quantization pipeline consistently produces efficient fully integer-only models across different model scales. Across all model scales, the proposed pipeline incurs only a moderate accuracy degradation while reducing the model size by approximately $3.6\times$ and the computational cost by more than one order of magnitude.
Infrared small target detection (IRSTD) is important for low-altitude perception, unmanned-system warning, and security monitoring. However, weak targets in infrared imagery usually occupy only a few pixels and are easily submerged by cloud clutter, ground edges, and bright noise, making it difficult for lightweight segmentation-based methods to preserve local target structures while suppressing background interference. To address these challenges, we propose LCMamNet, a lightweight cross-scale Mamba network that progressively enhances local target structures, interacts cross-scale context in a latent space, and restores spatial details with background suppression. Specifically, a compact hierarchical encoder with cross-shaped directional bottleneck residual (CDBR) blocks strengthens direction-sensitive target structures under a small computation budget. A latent dense cross-scale fusion (LDCF) module then performs dense all-level interaction through bidirectional Mamba modeling and reorganizes the interacted features into stable hierarchical semantics. Finally, a progressive decoder selectively recovers shallow spatial details while suppressing irrelevant background textures. Extensive experiments on IRSTD-1k, NUAA-SIRST, and NUDT-SIRST show that the proposed network achieves mIoU scores of 71.25\%, 79.60\%, and 95.58\%, respectively, with only 1.175M parameters and 6.91 GFLOPs. It also runs with a mean inference latency of 6.62 ms, and deployment results on an NVIDIA Jetson Orin NX 16G SUPER further demonstrate its practical potential for real-time edge inference. The code and checkpoints are publicly available at https://github.com/Haoyu096/LCMamNet.
Independent sidewalk mobility is essential for blind and visually impaired pedestrians (BVIPs), yet smartphone-based assistive navigation requires perception models that distinguish walkable sidewalks from adjacent unsafe regions. This study presents a safety-oriented semantic segmentation framework for future mobile guidance. We introduce SENSATION-DS, a chest-height pedestrian-view dataset with 2,752 image-mask pairs and nine-class navigation-relevant taxonomy. External urban and sidewalk datasets were harmonized to this label space, and five segmentation architectures were evaluated using staged target-domain adaptation with mask-conditioned synthetic images and Segment Anything Model 2 (SAM2) pseudo-labels. Models were assessed using mean Intersection over Union (mIoU), road- and sidewalk-specific metrics, Road-as-Sidewalk Error Rate as a proxy false-safe measure, and Android Open Neural Network Exchange benchmarking. Synthetic augmentation generally improved segmentation accuracy, whereas SAM2 pseudo-labels more consistently reduced Road-as-Sidewalk errors. UPerNet-MobileNetV3 achieved the highest offline mIoU (0.715 +/- 0.006), while DeepLabV3Plus-MobileNetV3 achieved the lowest Road-as-Sidewalk Error Rate (0.079) and highest Android runtime at 512x384 (7.383 FPS). These results show that assistive sidewalk perception should be evaluated jointly by segmentation accuracy, proxy false-safe behavior, and smartphone deployment feasibility, while real-world benefit requires validation with BVIP users. This evaluation supports selecting models that balance accurate perception, conservative error behavior, and practical runtime.
Thermal infrared (TIR) imaging is essential for UAV swarm operations in visually degraded environments. However, tracking tiny UAVs remains challenging due to limited appearance cues, frequent occlusions, and rapid maneuvers. Despite significant progress driven by benchmarks such as the Anti-UAV challenge, existing methods primarily prioritize accuracy while overlooking the computational constraints of real-time edge deployment. The standard Kalman Filter (KF) offers the efficiency required for edge devices, yet its constant-velocity assumption often breaks down under highly dynamic UAV motion and thermal sensor jitter. More sophisticated nonlinear estimators can improve robustness but often introduce additional computational costs. To address this gap, we propose an edge-aware online tracking pipeline centered on the Adaptive Kinematic Kalman Filter (AKKF), which augments the linear KF with state-dependent kinematic modeling while preserving real-time efficiency. Combined with transient false-positive suppression and kinematics-driven predictive coasting, the presented pipeline improves trajectory continuity under challenging TIR conditions. Experiments on the Beyond Strong Baseline (BSB) benchmark provide a starting point for edge-aware UAV tracking by jointly evaluating tracking performance and computational efficiency, offering insights toward future real-time deployment.
License plate character detection is a crucial component of intelligent transportation systems, where high accuracy and computational efficiency are required for real-time deployment. Although recent deep learning-based methods have substantially improved detection performance, many high-accuracy models rely on large-scale architectures that incur substantial computational overhead, limiting their applicability to resource-constrained devices. In this paper, we propose MicroCharNet, an ultra-lightweight model specifically designed for license plate character detection. The proposed architecture employs a compact backbone composed of C2f blocks, integrated with CoordAtt module to enhance feature extraction while preserving spatial information. A lightweight C3k2-based neck fuses multi-level features, followed by a single-level anchor-free detection head that enables end-to-end prediction. Experiments conducted on the UFPR-ALPR dataset demonstrate that MicroCharNet achieves competitive detection accuracy with only 0.08M parameters and 0.096 GFLOPs, while outperforming several recent YOLO-based baselines. Hardware-level evaluations further confirm its efficiency for real-time deployment on edge devices. These results indicate that carefully designed ultra-lightweight architectures can effectively balance accuracy and efficiency in license plate character detection. The source code is available at https://github.com/chequanghuy/MicroCharNet.
Rakesh Ranjan, Gajanan S. Kothawade, Kata Sharrer +2cs.CV
The recently introduced YOLO26 architecture incorporates NMS-free end-to-end inference and is optimized for deployment on resource-constrained CPU-based devices, making it well-suited for edge-based aquaculture applications. However, its performance, operational efficiency, and deployment suitability have not been systematically validated in aquaculture-specific scenarios. This study presents a comprehensive benchmark of YOLO26 against three Ultralytics predecessors (YOLOv5u, YOLOv8, and YOLO11) across nano, small, and medium model scales for fish mortality detection, a critical indicator of fish population health and welfare. Twelve model variants were evaluated for detection accuracy, training efficiency across seven dataset sizes, and inference performance on high-performance NVIDIA A100 GPUs and a CPU-only Raspberry Pi 5 edge platform. All models achieved comparable performance on the full dataset, with mAP50 differing by only 1.04 percentage points, indicating that architectural generation has little influence on final detection accuracy when sufficient training data are available. However, clear trade-offs emerged in data efficiency and deployment performance. YOLOv8 achieved 90% mAP50 with only 400 training images, whereas the YOLO26 nano and small variants required 1,000 images to reach comparable accuracy. Conversely, YOLO26n achieved the highest inference speed on the Raspberry Pi 5 (7.51 FPS), while YOLOv5mu outperformed all contemporary medium-scale architectures on CPU-based hardware. These results show that architectural novelty alone is insufficient for model selection and that training data availability, target hardware, and inference requirements should be considered jointly when selecting object detection models for practical edge AI deployment in aquaculture.
Uzair Khan, Luigi Capogrosso, Muhammad Aqeel +3cs.CV
In modern high-throughput industrial production lines, product configurations and visual characteristics frequently change, making it impractical to collect and annotate data for every new scenario. This dynamic setting makes Zero-Shot Anomaly Detection (ZSAD) particularly suitable, as it enables defect detection without requiring training on target-specific samples. Although recent ZSAD approaches show promising results, they are computationally intensive and thus unsuitable for deployment on resource-constrained devices. We propose LiZAD: a lightweight framework designed for real-time ZSAD specifically tailored for use on edge devices. The proposed approach pairs the dense and spatially aware visual features of DINOv3, crucial for precise pixel-level localization, with the highly computationally efficient text embeddings of MobileCLIP2. These features are then mapped into a shared latent space via low-memory trainable projection heads. Compared to six state-of-the-art ZSAD models, LiZAD achieves an average memory reduction of 61.5%, a parameter reduction of 74.6%, and a speedup of 3.02x in terms of latency. Despite substantial reductions in computational and memory costs, our approach maintains competitive anomaly detection performance, dropping the average P-AUROC by just 6.4% relative to the best state-of-the-art model across the VisA, BTAD, MPDD, and MVTec-AD datasets. Finally, it is successfully deployed on the NVIDIA Jetson NX and Jetson AGX edge devices and tested on the real production line of the Industrial Computer Engineering Laboratory (ICE Lab) at the University of Verona. The code is available at https://github.com/intelligolabs/LiZAD.
Self-Supervised Monocular Depth Estimation (MDE) has garnered attention in recent years due to its independence from ground truth. However, most existing models are limited to a single scale and exhibit considerable performance degradation in complex driving environments. Networks specifically designed to handle dynamic traffic participants tend to be overly complex, hindering their deployment on resource-constrained automotive edge devices. To address these limitations and move towards robust driving perception, we propose FlexDepth, a scale-driven and flexible family of self-supervised MDE models tailored for challenging road scenarios. FlexDepth employs a two-stage static-dynamic decoupled training strategy, enabling the independent assessment of confidence for both static backgrounds and dynamic road objects. Furthermore, it introduces a meticulously designed Scale-Driven Decoder (SDD) to dynamically select components based on scale size, facilitating efficient feature fusion and the output of high-precision depth maps. Extensive experiments on standard driving benchmarks demonstrate that without any auxiliary information, our model achieves state-of-the-art performance across arbitrary scales with minimal computational overhead. Our smallest model, Flex-Nano, requires only 0.7 GFLOPs and achieves 37.6 FPS on mobile platforms, ensuring reliable real-time perception while maintaining excellent zero-shot generalization.Our source code is avalible: https://github.com/startnew/flexdepth
With an increasing number of Object Detection (OD) models being deployed on edge devices, Zero-Shot Quantization for OD (ZSQ-OD) aims to quantize these models when access to the original training data is prohibited. Existing research on Zero-Shot Quantization-Aware Training (QAT) for OD synthesizes training sets through noise optimization. However, this approach struggles to maintain performance in low-bit regions. In this paper, we introduce GoodQ (Generative off-the-shelf models for object detector Quantization), a QAT pipeline that utilizes off-the-shelf generative models to construct a training set. We first identify three challenges that arise when introducing a generative model to the ZSQ-OD task: 1) each image contains dense information with multiple instances, 2) the class-wise distribution in the original dataset is imbalanced, and 3) the pseudo-labels assigned to the generated images can potentially act as noisy signals during QAT. GoodQ addresses these challenges by 1) introducing an Information-Dense Prompting strategy to generate multi-instance images, 2) applying Intrinsic Distribution-Aware Selection to match the pretrained class distribution, and 3) employing Teacher-guided Adaptive Noise Reduction to mitigate noise arising from the QAT process. Our framework achieves state-of-the-art performance in low-bit ZSQ (W4A4) and extends quantization to extreme bit-widths (W3A3). Furthermore, we conduct an extensive analysis to uncover the underlying factors contributing to the efficacy of GoodQ.
Text-to-image (T2I) diffusion models typically require substantial computational resources and cloud infrastructure, posing significant challenges for edge deployment in terms of latency, cost, and user privacy. We present JuZhou 1.0, an ultra-lightweight T2I foundation model designed for fully offline, on-device execution. JuZhou 1.0 achieves its efficiency through four key designs: (1) a compact image-generation backbone consisting of a 0.385B-parameter denoising U-Net and a 1.90M-parameter distilled decoder, totaling approximately 0.387B parameters; (2) Rectified Flow training combined with DMD2 distillation, reducing inference to 4 sampling steps; (3) Chinese semantic alignment trained on 9M curated image-text pairs, enabling direct Chinese prompting without external translation at inference time; and (4) a training and distillation pipeline completed on domestically developed Sugon K100 AI accelerators without relying on NVIDIA GPUs for training or distillation. Despite its compact scale, the 28-step base model of JuZhou 1.0 achieves an overall GenEval score of 0.69, outperforming published baselines including SDXL (2.6B, 0.55), SD3-Medium (2B, 0.62), and IF-XL (4.3B, 0.61). We further validate the full poetry-to-image pipeline on Android and the core CLIP-U-Net-VAE generation branch on iOS. On a smartphone powered by the Snapdragon 8 Elite Gen 5 Mobile Platform, the 4-step U-Net denoising branch runs in approximately 1.6 seconds, while the full Android poetry-to-image pipeline takes 4.5 seconds with on-device prompt refinement on Xiaomi 17 Pro Max. These results position JuZhou 1.0 as a practical approach to mobile text-to-image generation and provide a concrete reference for Chinese-native generation, domestic-compute training, and fully offline on-device deployment after one-time installation.
Vision Transformers have achieved remarkable success in many fields, yet their deployment on edge devices remains challenging due to their substantial computational demands. Post-Training Quantization (PTQ) offers an attractive solution by compressing models using a small calibration set with minimal training overhead. However, most existing PTQ works adopt a static quantization paradigm that is uniformly applied to all instances. Given the substantial diversity of natural images, the activation distributions vary significantly across samples, making these methods inherently suboptimal. In this paper, we propose ScalePredictor, a dynamic quantization framework for accurate and efficient quantization scale learning of ViTs. We first reveal a hidden correlation between the distribution range of shallow-layer activations and the optimal scales of deeper layers. Based on this, we develop a scale learning mechanism that integrates an efficient range extraction approach to capture robust range statistics at the shallow stage, which are then fed into a Taylor-motivated polynomial scale projection module to generate all quantization scales simultaneously. With the efficiency of polynomial approximation, ScalePredictor introduces insignificant computational overhead while avoiding costly just-in-time calibration. Extensive experiments on ImageNet demonstrate that ScalePredictor consistently outperforms prior PTQ methods, achieving a more favorable accuracy-efficiency trade-off. Code and additional results are shown in the supplementary materials.
Collision avoidance systems have evolved toward camera-based deep learning approaches for driving scene understanding. However, deployment in edge environments such as country clubs is constrained by limited computational resources and unreliable communication infrastructure. Moreover, constructing large-scale datasets for the target domain involves substantial annotation cost. To address these limitations, we propose an instance-aware knowledge distillation framework for semi-supervised learning. Specifically, we generate pseudo labels that mitigate teacher bias by leveraging domain priors from the teacher and instance-centric knowledge from foundation models. The trained lightweight student is deployed in the proposed collision avoidance system and performs multiple dense prediction tasks in real-time. The system detects frontal obstacles and encodes their spatial information into controller area network messages for automated guided vehicle operation. To achieve this, we construct a large-scale country club dataset and perform field validation of the proposed system. Experimental results demonstrate that the student outperforms the large teacher in instance segmentation while mitigating performance degradation in monocular depth estimation. Compared with the teacher, the student reduces FLOPs by 22.68$\times$ and parameters by 14.33$\times$, achieving 6.46 FPS on a low-cost edge device.
Industrial inspection needs zero-shot anomaly detection (ZSAD) that remains useful under edge deployment constraints. Recent methods often rely on ViT-L foundation backbones (~300M parameters), which exceed the memory and operator budget of typical embedded hardware. We study this regime through EdgeZSAD, a compact reference system built around a TinyViT-21M-512 backbone, an asymmetric global-local readout (EdgeGLR), and a reproducible source-side training recipe (Real-IAD-DR). We train a single checkpoint in a source-trained, target-unseen protocol and evaluate it across six industrial benchmarks. Across three independent runs, the resulting model reaches an average image AUROC of 91.6 on MVTec-AD and 88.2 on VisA, while remaining directly deployable on Jetson Orin Nano Super (TensorRT FP16) and RB5 Gen2 (QNN GPU FP16). Across the six device-rescored benchmarks, image-AUROC drift stays below 0.2 points, indicating that the exported graph preserves host-side ranking behavior in the evaluated deployment setting.
Ching-Yu Tsai, Chia-Min Lin, Chih-Hsiang Yang +2cs.CV
Crack detection plays an important role in infrastructure inspection and Structural Health Monitoring (SHM). However, cracks typically appear as thin, low-contrast structures and are easily affected by background noise, posing challenges for existing object detection models. This study proposes an improved YOLO-based architecture with integrated attention mechanisms, termed YOLO-AMC (YOLO with Attention Mechanisms for Crack Detection), to enhance automated crack detection performance. Based on YOLOv11, the original C2PSA module is removed, and multiple attention mechanisms, including Global Attention Mechanism (GAM), Residual Convolutional Block Attention Module (Res-CBAM), and Shuffle Attention (SA), are introduced into the multi-scale feature fusion layers of the Neck to strengthen cross-scale feature integration. Experimental results demonstrate that YOLO-AMC consistently outperforms baseline models YOLOv11n and YOLOv8n across multiple evaluation metrics. Among the evaluated attention modules, GAM achieves the best detection performance, obtaining mAP@0.5 = 0.9917 and mAP@0.5:0.95 = 0.9506 on the test dataset, which are higher than those of YOLOv11 (0.9833 / 0.9112) and YOLOv8 (0.9707 / 0.8921). Furthermore, while maintaining a computational complexity of 7.6 GFLOPs, the proposed model achieves 110.95 FPS on an NVIDIA RTX 4090 platform and approximately 5 FPS on a Raspberry Pi 5 edge device, demonstrating a favorable trade-off between accuracy and deployment efficiency. The implementation code for this study is available on GitHub at https://github.com/CY-Tsai24/YOLO-AMC.
Unmanned aerial vehicle (UAV) object detection requires compact detectors that retain small-object details under onboard computation and memory constraints. Repeated downsampling inlightweight networks weakens shallow spatial information, while manually adding attention orfusion modules may increase cost without stable gains. This study analyzes YOLOX-Nano underedge-deployment constraints by combining a P2 high-resolution detection branch with a quantum-inspired evolutionary algorithm (QIEA) for lightweight structure screening. The search space isdefined by lightweight priority and task specificity, and the evaluation jointly considers accuracy,floating-point operations (FLOPs), latency, memory consumption, and recall. On VisDrone, theP2 branch increases APamall by 31.10% over the YOLOX-Nano baseline. Compared with NanoDet-Plus with similar model size, YOLOX-Nano+-P2 improves APs0.ss by 17.5% and APamal by 44.9%.The QIEA-selected candidate obtains the highest Recallso, but +P2 remains the strongest AP-oriented variant after full training. Full 100-epoch verification of Random-best, GA-best, andSA/QUBO-best candidates further shows that proxy rankings do not necessarily transfer to finalAPse9s. These results support using P2 as the main small-object enhancement path and QIEA as alightweight tool for candidate screening and accuracy-cost analysis. The source code, configurationfiles, diagnostic scripts, and summarized results are available at https://github.com/Ming23233/UAV-QIEA-Edge-Detection
Automated surface defect detection is critical for ensuring rigorous quality control in high-speed manufacturing environments. While deep learning models offer remarkable accuracy, deploying them on resource-constrained edge hardware without introducing significant latency remains a persistent challenge. This paper presents Industrial-YOLO, an edge-optimized framework built upon a fine-tuned YOLOv8 architecture specifically engineered for real-time industrial defect detection. We conduct a systematic benchmark utilizing the NEU surface defect database for steel sheets and the MVTec AD dataset, supplemented with custom automotive manufacturing extensions representing real-world structural anomalies (scratches, pits, and inclusions). To bridge the gap between algorithmic complexity and edge hardware constraints, target-specific optimizations are introduced via TensorRT and OpenVINO acceleration engines. Experimental results demonstrate that Industrial-YOLO achieves a high-velocity inference speed exceeding 120 FPS on the NVIDIA Jetson Orin platform while maintaining an exceptional mean Average Precision (mAP) of 98.5%. The proposed framework showcases highly robust, zero-latency performance when deployed directly onto an active automotive assembly line, offering a scalable blueprint for next-generation automated optical inspection (AOI) systems.
Heterogeneous Face Recognition (HFR) aims at matching face images captured across different sensing modalities, such as thermal-to-visible or near-infrared-to-visible, enhancing the usability of face recognition systems in challenging real-world conditions. Although recent HFR methods have achieved significant improvements in performance, many rely on computationally expensive models, making them impractical for deployment on resource-limited edge devices. In this work, we introduce a lightweight yet effective HFR framework by adapting a hybrid CNN-Transformer model originally developed for RGB homogeneous face recognition. Our approach enables efficient end-to-end training with only a small amount of paired heterogeneous data, while still maintaining strong performance on standard RGB face recognition benchmarks. This makes it suitable for both homogeneous and heterogeneous settings. Comprehensive experiments on several challenging HFR and face recognition benchmarks show that our method achieves state-of-the-art or competitive performance while keeping computational requirements low.