Deformable linear objects such as wires and cables are difficult to segment because they are thin, highly deformable, and frequently self-occluded, while large-scale instance-level annotations are expensive to obtain in real scenes. Existing resources either focus on cable tracing or semantic segmentation under constrained settings, or generate visually plausible images without physically grounded wire deformation. We present WireSeg-32k, a synthetic dataset for wire instance segmentation with 32,000 RGB images, instance masks, depth maps, and a complementary real-world test set with annotations. To generate this dataset, we develop DeformX, a co-simulation pipeline that couples Cosserat-rod dynamics with photorealistic Isaac Sim rendering, enabling physically plausible, contact-consistent wire shapes, CAD-based wire assets, and diverse visually grounded scenes. As a simple baseline, LoRA fine-tuning SAM3 on WireSeg-32k alone improves real-world mAP@75 by 10.2% over the off-the-shelf model, showing that physically grounded synthetic data can transfer to real wire perception.
Training a video-generation model from scratch is hard for reasons that precede model design. The feedback loop is long: a failure that appears only after a training run can make each attempted fix another run. The data are hard to reach: the corpora and recipes behind strong models are large, heterogeneous, and often unreleased. And scoring is blunt: open-ended generation has no single correct output, and an aggregate score does not by itself establish whether a sample succeeds or which property failed. Dancing Stick Figures is a synthetic video dataset built against these three obstacles. For iteration speed, its 64x64, 64-frame reference task is sized for practical repeated training on a single workstation GPU. For accessibility, the release is a 0.79-GB training tier of 4,020 video clips--1,340 six-second source motions, each rendered from three cameras by a deterministic dataset-generation harness--with checkpoints and a Colab workflow that reruns the reference training pipeline at reduced budget on a 16 GB Tesla T4. For scoring, every frame retains its generating state (ARDY cskel27 joint positions, camera, body parameters, and source motion) and per-pixel depth, surface normals, and part labels. These annotations support dataset-specific metrics for visible topology and part-wise motion; corruptions expose their sensitivities and blind spots.
High-throughput phenotyping depends on accurate 3D reconstruction of plants across growth stages, yet the development and evaluation of temporal completion methods are limited by the lack of datasets with complete geometric ground truth. To address this challenge, we introduce SynthCrop4D, a procedurally generated synthetic dataset of temporally evolving plant point clouds that provides controllable noise, occlusion, and complete plant geometry for benchmarking reconstruction methods. Using this dataset, we evaluate a two-stage pipeline that combines spatial denoising and temporal point cloud completion. First, a denoising module removes structural artifacts from raw laser-scanned point clouds. The resulting data are then processed by an Adaptive Temporal PoinTr model that reconstructs the current growth stage (t) using information from the previous stage (t-1), enabling recovery of regions missing due to self-occlusion. We evaluate the proposed framework on both SynthCrop4D and the real-world Pheno4D dataset (tomato and maize) under settings with and without denoising. Results show that denoising substantially improves reconstruction quality, with the best configuration achieving a Chamfer Distance of 0.0061 on SynthCrop4D (Temporal PoinTr + Mamba-DG) and an F-Score of 0.2080 on Pheno4D (Vanilla PoinTr + Mamba-DG). We further demonstrate the use of completed point clouds for phenotypic trait extraction, including plant height, canopy width, and convex hull volume, obtaining hull-volume MAEs of 0.021 on synthetic data and 0.343 on real data. Together, SynthCrop4D and the proposed pipeline provide a benchmark and methodology for temporal plant reconstruction and high-throughput crop phenotyping.
This paper presents $π$-SUB, a physics-informed framework for generating synthetic underwater benchmark datasets that bridges the synthetic-to-real gap for Underwater Image Enhancement (UIE). The proposed framework extends the classical underwater image formation model by incorporating depth-dependent downwelling irradiance, biologically resolved absorption, and environmental scattering across all ten Jerlov water types, together with independently controllable residual phenomena. Using this framework, the $π$-SUB dataset consists of paired synthetic underwater-reference images spanning shallow-to-deep and coastal-to-oceanic environments. Extensive simulation studies have been carried out to evaluate $π$-SUB along two criteria namely hyper-realism and generalizability. For hyper-realism, $π$-SUB attains a global Frechet Inception Distance (FID) that is 46% lower than Syrea. For generalizability, four state-of-the-art UIE architectures (FUnIE-GAN, Pix2Pix, PUIE-Net, and Phaseformer) are used for comparative evaluation of $π$-SUB. These models were independently trained on six datasets including one real and five synthetic datasets and tested on six real-world benchmarks datasets. Across four UIE architectures and six real benchmark datasets, $π$-SUB improves UIQM by 4.18% over PHISWID (next best) and 9.46% over Syrea (next best), while reducing NIQE by 48.78% and 23.98%, respectively. These results establish $π$-SUB as a hyper-realistic and generalizable benchmark for developing the next generation of underwater image enhancement methods. The code and dataset are available at https://github.com/airl-iisc/pi-SUB
Image matting is an essential enabling technology for modern visual content production, where foreground extraction determines the realism and editability of downstream creation workflows. However, precise alpha estimation in open-world scenes remains challenging because real foregrounds exhibit highly diverse appearances and opacity patterns. This makes existing methods struggle with semantic ambiguity and fine-grained opacity variation, especially in sparse boundary regions that are fragile and difficult to supervise. To address this gap, we present RenderMatte, a trimap-guided matting framework that adapts FLUX.1 Kontext through full-parameter fine-tuning, leveraging image editing priors for structure-preserving alpha prediction. During supervised adaptation, an alpha-edge objective preserves the latent flow-matching signal while strengthening pixel-space boundary supervision. We further introduce group-relative alpha alignment for post-training. It compares multiple mattes sampled under the same trimap condition using matting-specific rewards for alpha accuracy, boundary fidelity, trimap compliance, and compositional consistency. To overcome the lack of precise edge annotations, we construct the RenderMatte dataset, a large-scale synthetic dataset combining 3D-rendered RGBA foregrounds with diverse multi-source assets. It features exact strand-level alpha annotations and diverse background composites. Experiments show state-of-the-art performance across all benchmarks, demonstrating a scalable path toward high-fidelity matting in open-world scenes.
A. Contreras, D. Porres, R. Abad +4cs.CV cs.AI cs.SE
The development of autonomous vehicles (AVs) usually relies heavily on data-driven artificial intelligence (AI) models that require large volumes of sensor data with ground-truth annotations. While modular architectures are widely used, end-to-end driving paradigms offer a promising alternative by directly mapping sensor inputs to control actions. However, their adoption is limited by challenges in interpretability and explainability. To address this, we present LAIA (Labelled Attention for Intelligent Automobiles), a novel synthetic dataset designed to enrich end-to-end driving research with human attention data. Collected using the CARLA simulator in closed-loop environments, LAIA comprises over 15 hours of driving from 44 participants across carefully crafted scenarios designed to evoke natural responses. Each sequence includes RGB images under six weather conditions, semantic and instance segmentation, depth, optical flow, CAN bus signals, and synchronized eye-tracking data. LAIA enables applications including training attention-aware end-to-end AI drivers, predicting driver behavior, developing methods to detect anomalous driver-attention patterns, and improving model explainability. In this work, we use LAIA to compare human attention with the perceptual attention emerging in our end-to-end driving models, thereby providing insight into their behavior.
Goodarz Mehr, Sepideh Gohari, Montasir Abbas +1cs.CV cs.LG cs.MA cs.RO
Cooperative perception through vehicle-to-everything (V2X) communication can overcome the inherent physical limitations of individual autonomous vehicles, such as occlusions and limited sensor range. However, the development of robust V2X algorithms, particularly those relying on unified spatial representations like bird's-eye view (BEV) representation, is hampered by the lack of large-scale, multi-modal, multi-task datasets. Moreover, collecting and annotating a large set of synchronized, real-world multi-agent data is prohibitively expensive. This has resulted in a landscape where existing V2X datasets are notably limited in both size and scope. To overcome this, we introduce SimBEV2X, an advanced synthetic data generation tool built on the CARLA simulator. SimBEV2X automatically creates randomized driving scenarios to collect multi-modal sensor data alongside various types of ground truth including 3D bounding boxes with unique track IDs, HD map information, BEV segmentation maps, and semantic occupancy voxel grids from both vehicles and RSUs. We also present the SimBEV2X dataset, the largest V2X perception dataset to date. The dataset comprises 258 scenes, each involving up to 8 connected vehicles and up to 4 RSUs across a variety of road networks. The SimBEV2X dataset is an order of magnitude larger than existing V2X datasets and contains 102,200 frames, 588,520 lidar point clouds, more than 3 million images, over 27 million bounding boxes, and a comprehensive set of other annotations. Finally, we establish a strong baseline on the SimBEV2X dataset using CoopDet3D and propose CoBEVFusion, a novel architecture that combines CoopDet3D with fused axial attention (FAX) for context-aware multi-agent feature aggregation, resulting in superior performance. SimBEV2X, the SimBEV2X dataset, and CoBEVFusion are available at https://simbev2x.org and https://github.com/GoodarzMehr/SimBEV2X.
Optical Character Recognition (OCR) for Persian remains substantially less mature than for Latin-script languages despite Persian being spoken by more than 110 million people across multiple countries. This gap arises from two fundamental challenges: the intrinsic complexity of the Perso-Arabic writing system and the limited availability of large-scale, high-quality annotated datasets. Persian script exhibits obligatory cursive connectivity, context-dependent glyph shaping, extensive ligatures, diacritic placement, and stylistic variation across writing forms such as Naskh and Nastaliq, all of which significantly complicate text recognition. At the same time, the high cost and labor-intensive nature of manual annotation have created a persistent data bottleneck, limiting the development of robust OCR systems and slowing progress in Persian document digitization.In this paper, we introduce Persian Pixel, a comprehensive synthetic OCR dataset specifically designed to address these challenges. Comprising over 343,000 high-fidelity image text pairs, the dataset spans sentence, paragraph, and full-page document layouts generated from a carefully curated seven-million-word Persian corpus using the SynthOCR-Gen rendering framework. The generation pipeline faithfully models the typographic characteristics of Persian script, including contextual character joining, positional glyph variants, diacritic placement, and multiple representative Persian typefaces. To bridge the synthetic-to-real domain gap, the rendered images are further enriched with more than twenty-five stochastic degradation models that emulate realistic document acquisition artifacts, including ink bleed, paper aging, blur, illumination variation, scanner imperfections, compression artifacts, and multiple noise processes.By overcoming the long-standing scarcity of annotated Persian OCR data, Persian Pixel provides a scalable and openly available resource for training and fine-tuning modern OCR architectures, including transformer-based models such as TrOCR and Donut. The dataset establishes a strong foundation for research in Persian document analysis, historical manuscript digitization, and end-to-end document understanding, while demonstrating that programmatic synthetic data generation offers a practical, cost-effective, and scalable alternative to manual annotation for advancing OCR in low-resource and typographically complex scripts.
We present X-lens, a compact feed-forward model for metric depth estimation from a variable number of calibrated fisheye and pinhole views. To support real-time downstream perception, X-lens is built around a geometry-aware heterogeneous camera formulation with two key components. Learnable calibration tokens provide a coarse alignment between fisheye and pinhole projective spaces, while a Jacobian-parameterized distortion bias injected into cross-attention models local projection changes and promotes cross-camera consistency, enabling robust generalization with only 0.04B parameters and up to 41 FPS. The model predicts dense depth together with a global metric scale, avoiding auxiliary reconstruction targets that increase computation and optimization complexity. To learn such cross-camera generalization at scale and depth, X-lens is trained on multiple public datasets and OmniScene, our newly released large-scale synthetic dataset containing approximately 266K synchronized six-view frames, 1.7M individual images, and 103 indoor and outdoor scenes. Extensive experiments on both real-world and synthetic indoor and outdoor datasets demonstrate superior heterogeneous-camera metric depth accuracy, reducing AbsRel by 25.4\% on OmniScene-Full over the strongest baseline while using 88.9\% fewer parameters, with competitive performance on conventional fisheye-only and pinhole-only settings.
Haidong Wang, Hengxing Cai, Wanlei Li +2cs.CV cs.RO
Intelligent Transportation Systems deployed on highways predominantly rely on conventional RGB cameras for traffic perception and vehicle tracking. However, highway environments present unique challenges: the absence of artificial lighting infrastructure, combined with high vehicle velocities, results in severely degraded perception performance under low-light conditions. Specifically, nighttime scenarios suffer from motion blur, insufficient exposure, and poor signal-to-noise ratios, which catastrophically impair the reliability of RGB-based sensing systems. To address these limitations, we propose a novel Joint Event-RGB Adaptive Tracking (JEAT) framework. Unlike existing multi-sensor trackers constrained by rigid, hard-coded prioritization, JEAT merges asynchronous event streams and RGB frames into a unified joint data association optimization. By employing an Adaptive Extended Kalman Filter to continuously estimate measurement noise via NIS statistics, the framework dynamically weights and fuses both modalities, optimally harnessing event streams during dark or high-speed motion while leveraging RGB frames under bright or static conditions. Furthermore, given the absence of publicly available datasets tailored for event-based highway perception with diverse environmental conditions, we present SEHN, a large-scale synthetic dataset generated using the CARLA simulator. Our dataset encompasses diverse environmental conditions (daytime, nighttime, nighttime with out artificial lighting) and varying traffic densities, providing synchronized RGB imagery and event streams to facilitate multi-modal fusion research. Our code and datasets will be available at https://github.com/haidongwang96/SEHN.
Pei-Sze Tan, Sailaja Rajanala, Yee-Fan Tan +2cs.CV
Micro-expression recognition is limited by the small scale, narrow demographic coverage, and restricted emotion labels of existing datasets. We introduce EquiME, a synthetic micro-expression dataset built from AU-guided image-to-video generation. EquiME contains 75K videos generated from 15K source face images across five target emotions, together with automatically inferred demographic metadata and video-quality measurements. We evaluate EquiME using frame-pair similarity, spatial variation, and no-reference perceptual-quality metrics, together with cross-dataset MER experiments on SAMM and CASME II. Models trained on EquiME achieve competitive cross-dataset performance on SAMM and CASME II and show comparatively low variation across the four evaluated architectures. This paper focuses on the dataset design, the structured AU-conditioning pipeline used for video generation, and the empirical evidence needed to assess EquiME as a synthetic MER resource. Project page: https://kirito-blade.github.io/me-vlm/
Automation in construction is essential for reducing costs and human errors in large-scale projects. We approach the construction progress monitoring from the aspect of detecting changes in construction sites. As construction buildings continue to evolve in geometry and appearance over time, change detection need to be performed from arbitrary camera viewpoints. This necessitates developing 2D Change Detection (2DCD) algorithms that operate robustly across diverse camera perspectives at construction sites. While developing and evaluating such systems is data-intensive, no open-source benchmark dataset exists at the intersection of 2D change detection and construction automation research. Data collection using Unmanned Aerial Vehicles (UAVs) is gaining its popularity in outdoor large-scale surveying. However, in active construction sites conducting drone missions equipped with high-end sensors imposes safety concerns. Flight trajectory and collected camera viewpoints can be significantly limited. To address this critical gap, we introduce iVISION-2DCD, a large-scale synthetically generated dataset from dense LiDAR point clouds with photorealistic input images and accurate ground truth annotations. Our dataset formally defines the problem of viewpoint-robust 2DCD at construction sites and captures the inherent complexities of real-world deployment. In this paper, we present our systematic methodology for synthetic data generation, developing novel view synthesis techniques to overcome bi-temporal alignment and viewpoint diversity challenges, and implementing semi-automated semantic segmentation with change label generation while preserving challenging real-world cases. Benchmark evaluations using state-of-the-art 2DCD algorithms demonstrate that iVISION-2DCD poses novel research challenges for the computer vision and robotics communities.
Depth-of-field control is a fundamental tool in photography, yet post-capture bokeh editing from a single image remains challenging. A practical editor should handle images captured under arbitrary focus and aperture settings. Existing methods typically assume an all-in-focus input, or first recover an all-in-focus image before rendering new bokeh. Such pipelines can discard useful blur cues from the source image and propagate reconstruction artifacts into the final edit. We introduce AnyBokeh, a physics-guided framework for any-to-any bokeh editing. Instead of treating source blur merely as a degradation to be removed, AnyBokeh estimates the source blur state with a signed circle-of-confusion map and a disparity map. By modeling the linear relation between signed circle of confusion and disparity difference, AnyBokeh estimates a source-specific optical fingerprint and transfers the source optical characteristics to the desired focus and aperture setting. A generative editor conditioned on both source and target circle-of-confusion maps then performs relative blur synthesis, enabling spatially adaptive deblurring, preservation, and defocus rendering. To support physically supervised learning, we further construct a high-fidelity synthetic dataset with accurate depth, focus distance, and full EXIF metadata. Experiments on real-world benchmarks show that AnyBokeh achieves faithful and controllable editing across any-to-any bokeh editing, all-in-focus-to-bokeh rendering, and defocus deblurring, while avoiding all-in-focus reconstruction and test-time bokeh-level calibration commonly required by existing approaches. The code and dataset will be available at https://github.com/itsmag11/AnyBokeh.
For uncrewed aerial vehicles (UAVs), estimating six-degree-of-freedom (6-DoF) poses is essential for airspace situational awareness, target tracking, and counter-UAV operations. However, non-cooperative targets usually lack computer-aided design (CAD) models and keypoint priors, making existing model-based or keypoint-matching methods difficult to apply reliably. To address these challenges, this paper proposes MF-UAVPose6D, a model-free monocular 6-DoF pose estimation framework for fixed-wing UAVs. During inference, the method takes only a single red-green-blue (RGB) image and camera intrinsics as input. It first obtains a stable target anchor through heatmap-guided center localization, introduces a Perspective-Aware Module (PAM) to model observation-ray priors, exploits Dynamic Topological Sampling (DTS) to complement weak structural cues from the wings, fuselage, and tail, and adopts a decoupled translation-rotation pose decoding mechanism to estimate the 6-DoF pose. In addition, we construct the FW-UAV6DPose synthetic dataset, which covers fixed-wing UAV observations across diverse distances, viewpoints, and poses. Experimental results show that MF-UAVPose6D achieves accurate and efficient monocular 6-DoF pose estimation without requiring CAD models, and demonstrates strong robustness in long-range rotation estimation, depth recovery, and joint pose evaluation.
WordArt (artistic text) features highly customized fonts, textures, and layouts, making WordArt-oriented scene TExt Recognition (WATER) substantially more challenging than general Scene Text Recognition (STR). Existing STR datasets and methods, typically built around regular scene text and fixed-template inputs, struggle to scale to WATER. Thus, we aim to advance this task from both data and model perspectives. On the data side, we construct a 2M synthetic dataset, WATER-S, with the scale improved by hundreds of times compared to existing artistic text data. WATER-S consists of two complementary subsets. One rendered by an upgraded rendering pipeline (SynthWordArt), which provides highly accurate and controllable synthetic WordArt data. The other is generated by combining Qwen3-VL for prompt mining and Z-Image for image synthesis, which improves the coverage of realistic and diverse data. On the model side, we propose WATERec. It adopts an visual encoder supporting arbitrary-shaped inputs and an autoregressive decoder to model complex layouts, structurally breaking the bottleneck of fixed-template STR on WordArt. Experiments show that this architecture outperforms prior STR methods, achieving state-of-the-art performance on irregular texts such as WordArt. Together with WATER-R, carefully reorganized from existing real STR data, our strong baseline with the new synthetic data and model design reaches 90.40% accuracy on WordArt-Bench, surpassing both general-purpose and OCR-specialized vision-language models by a large margin. Code and data are available at https://github.com/YesianRohn/WATER.
Haq Nawaz Malik, Faizan Iqbal, Nahfid Nissarcs.CV cs.CL
Optical Character Recognition (OCR) for low-resource languages is often constrained by the lack of annotated training data and the complexity of script-specific rendering. Kashmiri, written primarily in the Perso-Arabic Nastaliq script, presents additional challenges due to contextual glyph shaping, dense ligatures, and orthographic variability. We introduce Koshur Pixel, the first large-scale synthetic OCR dataset for Kashmiri, comprising 613,078 image-text pairs generated from the KS-PRET-5M corpus using the SynthOCR-Gen framework. The dataset spans multiple fonts and textual granularities, ranging from individual words to full-page documents, and incorporates more than 25 augmentation strategies that emulate real-world document degradations. Koshur Pixel provides a scalable and cost-effective alternative to manual annotation, establishing a foundational resource for training OCR systems, digitizing Kashmiri textual heritage, and advancing language technologies for a severely under-resourced language.