HiFi-BRep: High-Fidelity Latent Representation for Robust B-Rep Generation

Boundary representation (B-Rep) generation is a fundamental task in computer-aided design, yet the direct synthesis of high-fidelity and structurally valid B-Reps remains a major challenge. Existing deep generative methods suffer from two forms of brittleness: representation brittleness, caused by padding noise and feature contamination in the latent space, and generation brittleness, stemming from sequential error propagation and a train-inference mismatch due to non-differentiable validity enforcement. We propose HiFi-BRep, a novel framework that addresses these limitations through two synergistic contributions. First, a topology-aware encoder constructs a high-fidelity latent representation by eliminating padding via learnable queries and preventing feature contamination with topology-guided attention. Second, a single-stage decoder jointly predicts geometry and topology in parallel, embedding core manifold constraints as a differentiable learning objective. This design ensures mutual guidance between geometry and topology while avoiding cascaded errors. Extensive experiments show that HiFi-BRep significantly outperforms state-of-the-art methods in both structural validity and geometric fidelity, providing a robust solution for high-quality B-Rep synthesis. Code and models are publicly available at https://github.com/1nnoh/HiFi-BRep.

CADEngBench: It Looks Like CAD, but Does It Work? Evaluating Parametric Design, Assembly Reasoning, and Physics Simulation

A CAD model is not engineering-grade merely because it looks correct. It must satisfy design requirements, respond predictably to parameter changes, support controlled edits, match a reference structural response under a declared analysis, and connect to other parts through valid joints. We present CADEngBench, a two-track benchmark for these capabilities. CADEngBench-P evaluates 300 parametric parts, each used for one zero-to-CAD task and one functional-editing task (600 tasks in total), through boundary-representation (B-Rep) validity, engineering and DFM checks, parameter-family perturbations, functional editing, and matched linear-static FEA in CalculiX. CADEngBench-A evaluates 150 body pairs through ranked joint retrieval, exact face-and-edge grounding, joint-frame prediction, and kinematic verification. Across eight multimodal, code-capable models, editing supplied CAD is substantially easier than generating it, while complex edits and matched FEA remain difficult. Assembly predictions often locate the relevant region but fail to recover the recorded joint or mating entities. These results show that CAD evaluation must test engineering behavior rather than appearance alone.

Wrong Design Intent Is Worse Than Never Conditioning: A Derangement-Control Diagnosis of Header Conditioning in CAD Program Completion

Fine-tuned code LLMs are routinely conditioned on a design-intent specification, but the correctness axis of such a signal -- a wrong intent rather than an absent one -- has not been tested, and the benefit of conditioning is usually scored with the same detector that defines the signal. We study CADCON, a five-feature design-intent header prepended to CadQuery-style programs during LoRA fine-tuning of Qwen2.5-Coder-1.5B, scoring adherence with executable geometric assertions that share no code with the header-defining extractor. On a pre-registered sample of 400 deduplicated held-out programs stratified over eleven intent profiles, at 40% prefix and three seeds, a semantically wrong header degrades adherence below the never-header-trained baseline on 3/3 seeds under both tokenizations at the program level, and on 3/3 token and 2/3 text seeds at the 298 distinct model inputs they present. Wrong-header executability is not depressed relative to that baseline. A derangement control, retrained so every program receives another program's header -- holding the header marginal fixed while destroying its correlation with the program -- saw the same programs, indices and wrong headers. Its correct-to-wrong change is -0.006/+0.016/-0.003 against 0.124/0.241/0.230 for the standard model, and the interaction is significant on 3/3 seeds (p <= 5.9e-7), so the model's sensitivity to whether the header is right or wrong requires the learned mapping. The control sits below the baseline by the same margin under a correct as under a wrong header, so we claim that sensitivity and not the below-baseline level. On features the true intent lacks, the standard model realizes a feature far more often when the wrong header names it; the control does not. Ground truth itself scores only 0.567 here, the scale on which arm levels should be read. Wrong design intent is not inert: it actively misdirects generation.

Masked Topology Modeling for Self-Supervised Learning on Parametric CAD

Computer aided design (CAD) is ubiquitous: virtually any modern object was designed using editable CAD tools. However, with the shortage of available CAD datasets in its native editable and parametric format, boundary representation (B-Rep), it is ever more important to develop data-efficient methods for this domain. We present a new self-supervised pretraining task, Masked Topology Modeling (MTM), that leverages the face-adjacency graph, an induced structure unique to B-reps that the encoder can be asked to reconstruct. MTM masks a fraction of edges and trains a small head to predict each masked edge's convexity and curve type from the encoder's post-message-passing face features. We combine MTM with a MoCo-style momentum-queue contrastive learning over B-rep-aware augmentations, a BFS-connected face-region masked-reconstruction objective, and pretraining on the ABC dataset and our new procedurally generated dataset to show strong performance on a number of benchmarks.

Linkify: Learning from Interface-Augmented Assembly Graphs

We present Linkify, a framework for learning from interface-augmented assembly graphs to enable context-aware part retrieval in mechanical assemblies. While recent generative AI methods for CAD have focused largely on isolated parts or monolithic assemblies, the rich geometric information at the interfaces between parts, where function is realized, remains underexplored. We address this gap by recomputing high-fidelity interface geometry for the Fusion 360 Gallery Assembly dataset, correcting missing and erroneous contacts, and generating point-cloud representations of local contact regions. Using this data, we construct assembly graphs whose nodes encode part geometry and whose edges encode interface geometry via a pretrained point-cloud encoder. On top of this representation, we train a Graph Attention Network based on GATv2 to solve a masked part prediction task: given an assembly with one part held out, the model predicts the class of the missing component from a large vocabulary of geometrically clustered parts, thereby approximating a realistic part-retrieval scenario. Compared to non-graph baselines such as logistic regression and k-nearest neighbors operating on aggregated node features, Linkify achieves higher Top-K accuracy and F1 scores. Ablation studies on graph connectivity, edge attributes, and attention mechanisms demonstrate that accurate contact computation and dynamic attention over interfaces are critical for performance. Our corrected interface dataset and training pipeline, released publicly, provide a foundation for future interface-aware models for assembly retrieval, validation, and generative design.

BIM-Edit: Benchmarking Large Language Models for IFC-Based Building Information Modeling

Large language models (LLMs) are increasingly applied to computer-aided design (CAD) to generate design artifacts from textual instructions. In engineering practice, this requires more than creating new geometry, models must also understand existing scenes, edit them correctly, and preserve semantics and relations. However, many CAD benchmarks focus on creating new models rather than editing existing ones, and mostly evaluate geometric correctness. We introduce BIM-Edit, a benchmark for evaluating LLMs on natural-language editing of Building Information Models (BIM) represented in the Industry Foundation Classes (IFC) format. BIM provides a challenging testbed because building models encode geometry together with semantic and relational structure. BIM-Edit contains 324 editing tasks spanning 11 realistic building models and 36 synthetic scenes. Tasks are expressed using three instruction categories - direct, spatial, and topological - covering both explicit and scene-grounded edits. We evaluate outputs along three dimensions: geometric accuracy, semantic validity, and topological consistency. Across evaluated LLMs, the best-performing model achieves only 49.5% average score across the three metrics, and no model fully solves more than 3.4% of tasks. These results demonstrate a substantial gap between current LLM capabilities and the requirements of structured engineering design workflows.

BRepCLIP: Contrastive Multimodal Pretraining on BRep Primitives for CAD Understanding

Learning representations of CAD models is a largely open problem. While 3D representation learning has flourished around point clouds and meshes, the native format of CAD - boundary representations BReps, which encodes exact parametric surfaces, curves, and their topology, has received little attention as a representation learning substrate. We introduce BRepCLIP, the first framework to align BRep geometry with language and image embeddings through contrastive pretraining. We model each CAD object as a sequence of face and edge tokens with separate discrete vocabularies for surface and curve geometry, augmented with spatial and semantic descriptors that capture surface types (e.g., cylindrical, torus, NURBS) and curve primitives (e.g., line, arc, B-spline). A transformer encoder aggregates these tokens into a global BRep embedding, aligned with CLIP's text and image encoders via a joint contrastive objective. BRepCLIP generates more discriminative and semantically grounded embeddings than existing point-based alternatives, improving Top-1 retrieval over OpenShape by 40.4%, 22.0%, and 23.9% on ABC, CADParser, and Automate, respectively, and improving zero-shot classification on FabWave by 15% in Top-1 score. We further demonstrate its utility as a CAD-aware similarity metric for evaluating text and image-conditioned CAD generation, establishing the importance of structure-aware pretraining for multimodal CAD understanding. Project page is available at https://muhammadusama100.github.io/BrepClip2026/

Zero-to-CAD: Agentic Synthesis of Interpretable CAD Programs at Million-Scale Without Real Data

Computer-Aided Design (CAD) models are defined by their construction history: a parametric recipe that encodes design intent. However, existing large-scale 3D datasets predominantly consist of boundary representations (B-Reps) or meshes, stripping away this critical procedural information. To address this scarcity, we introduce Zero-to-CAD, a scalable framework for synthesizing executable CAD construction sequences. We frame synthesis as an agentic search problem: by embedding a large language model (LLM) within a feedback-driven CAD environment, our system iteratively generates, executes, and validates code using tools and documentation lookup to promote geometric validity and operation diversity. This agentic approach enables the synthesis of approximately one million executable, readable, editable CAD sequences, covering a rich vocabulary of operations beyond sketch-and-extrude workflows. We also release a curated subset of 100,000 high-quality models selected for geometric diversity. To demonstrate the dataset's utility, we fine-tune a vision-language model on our synthetic data to reconstruct editable CAD programs from multi-view images, outperforming strong baselines, including GPT-5.2, and effectively bootstrapping sequence generation capabilities without real construction-history training data. Zero-to-CAD bridges the gap between geometric scale and parametric interpretability, offering a vital resource for the next generation of CAD AI.