Online adaptation can help edge time-series forecasting under distribution drift, but its measured benefit is sensitive to evaluation choices. We study six public multivariate streams, including building-sensor and smart-meter data, under a leakage-free streaming protocol. We identify two additional sources of comparison bias. First, the warmup budget of the static baseline has a two-sided effect: insufficient warmup undertrains the baseline, whereas excessive warmup can degrade its pre-drift generalization. Across six dataset-backbone settings, the estimated adaptation benefit changes by 3.0 to 18.8 percentage points (pp) over the 1,000-20,000-step warmup range. Second, comparing SGD with momentum (SGD+m) and Adam at a shared default learning rate conflates optimizer quality with rate sensitivity. We select both the warmup budget and each optimizer's online rate using a held-out pre-drift validation slice without accessing test data. Under this validation-only procedure, Adam outperforms SGD+m in 310 of 360 evaluated cells, while 4 Adam cells remain below the static baseline. We further characterize accuracy against adaptation-state memory and A100-measured per-update latency for full, head-only, and calibration-based adaptation. In the evaluated PatchTST frontier settings, several parameter-efficient variants are nondominated on the adaptation-state-memory axis. Smart-meter analyses also show that reported gains depend on meter-selection rules. These findings support a validation-only commissioning procedure, while target-device latency and energy remain to be measured. Code, data, and all reported numbers: https://github.com/keiotakmin/tsf-edge-adaptation.
The rising prevalence of psychological disorders necessitates effective emotion monitoring, yet current methods relying on facial or physiological signals often suffer from intrusiveness and privacy issues. This paper proposes an intelligent decision support system and pervasive edge-computing framework that leverages smart glasses and a companion smartphone to infer emotional states from microscopic visual fixation patterns. Moving beyond traditional macroscopic gaze metrics, the proposed system extracts and decomposes three distinct neurophysiological micro-movements: microsaccades, ocular drifts, and ocular microtremors. We introduce an interpretable hybrid artificial intelligence pipeline combining a multi-head attention mechanism, extreme gradient boosting, and a support vector machine to extract deep temporal features, quantify their physiological importance, and perform efficient on-device classification. Through an extensive evaluation involving 60 volunteers, we rigorously validate the framework under a strict leave-one-subject-out cross-validation protocol across both controlled and naturalistic mobile scenarios. Ablation studies unequivocally demonstrate that these fixational micro-movements are substantially more discriminative for emotion inference than traditional macroscopic features. Furthermore, aligned with contemporary affective science, the system incorporates a few-shot personalization mechanism to bridge universal physiological baselines with individual emotional heterogeneity, achieving a highly robust personalized F1-score of 83.6%. This work establishes a physiologically interpretable, unobtrusive, and deployable paradigm for continuous real-time emotion monitoring.
The number of edge devices in large-scale edge systems is rapidly increasing. Edge devices have limited processing power, memory, and network bandwidth, making resource utilization and data management during edge query processing challenging. Joins are among the costliest database operations in terms of time and resources. The State-of-the-Art edge query processing, Column Imprint-Hash Join CI-HJ, addresses this challenge using equi-height binning to accelerate hash joins. However, it lacks efficiency in real-time processing and scans unnecessary cachelines. This paper presents Workload Aware Column Imprint-Hash Join WACI-HJ, which uses a workload-aware approach to accelerate hash joins. Predicting the upcoming query workload in advance further improves its suitability for real-time edge query processing. WACI-HJ comprises two phases: WACI-HJ Generation Phase, including Pre-processing, Prediction, and Blocking and Hashing modules to compute bins based on the predicted workload before query arrival, and Query Processing and Resource Utilization, which handles query processing and CPU, RAM, and I/O utilization. Evaluations on a benchmark dataset and a real-world Smart Transportation dataset show a 54% reduction in cachelines read and 10% improved query execution time. The proposed technique is effective for both scaled and skewed data. Although PCR is an indirect measure of energy consumption, the work also directly measures energy consumption through energy-efficiency experiments. WACI-HJ shows 1%, 38%, and 49% gain in CPU, RAM, and I/O, respectively. Optimizing cache usage and query execution speeds up real-time traffic analysis, congestion management, and routing in Smart Transportation. Additionally, this technology can be applied to other domains to accelerate edge query processing.
Chongzhi Wu, Zhengtao Li, Jiawen Kang +4cs.NI cs.LG
Artificial Intelligence-Generated Content (AIGC) services employ Generative AI (GenAI) models to automatically generate diverse content. Mobile AIGC networks host GenAI models on edge-located AIGC Service Providers (ASPs) to deliver low-latency and personalized AIGC services for mobile users. However, AIGC inference tasks typically occupy GPU memory until task completion, causing GPU memory exhaustion at serving ASPs and triggering out-of-memory failures rather than merely increasing service latency. Existing studies on AIGC task orchestration have largely overlooked GPU memory feasibility constraints. To address this issue, we develop a cooperative multi-agent orchestration framework, in which each edge node is equipped with a scheduling agent to route tasks to local ASPs or neighboring edge nodes. Since scheduling agents make decisions based only on local observations, while peer offloading couples their resource states and long-term utilities, we formulate the orchestration process as a cooperative Decentralized Partially Observable Markov Decision Process (Dec-POMDP). To solve the Dec-POMDP, we propose an \underline{A}ttention-guided \underline{M}ulti-\underline{A}gent deep reinforcement learning algorithm with \underline{Diff}usion policies (A-MADiff) under the centralized training with a decentralized execution paradigm. A-MADiff employs diffusion-based decentralized actors to generate multi-modal preferences over feasible orchestration actions, and an attention-guided centralized critic to estimate per-agent values from cross-agent states under GPU memory heterogeneity. Numerical results demonstrate that A-MADiff significantly improves the cumulative reward over the state-of-the-art baseline.
Thomas Benton Townsend, Joshua Bean, Benjamin K Tkach +2eess.SP cs.LG eess.SY
As an increasing number of critical applications, including environmental, emergency, meteorological, and agricultural, rely on real-time anomaly detection in geospatial data streams, challenges related to the storage, processing, and communication of this data arise. Traditionally, large volumes of data have been sent to centralized processing locations for insight extraction. Given the big data context of these applications, this approach becomes increasingly infeasible as data volume and velocity continue to increase. This paper proposes a lightweight edge-oriented approach for anomaly detection and localization for geospatial data streams. By leveraging the H3 discrete global grid system and a multi-scale drill-down logic, the proposed approach significantly reduces computational overhead, achieving a 99.7\% reduction in evaluations compared to traditional flat-scan methods. Furthermore, by filtering out noise-induced flickering anomalies at lower resolutions, spatially-persistent anomalous signals can be efficiently identified. The results demonstrate that the proposed framework effectively distills massive geospatial data into actionable insights.
Event-based vision has emerged as a promising paradigm for energy-aware artificial intelligence (AI), offering sparse, low-latency visual signals that reduce redundant data processing and support sustainable edge computing. However, the asynchronous and noise-prone nature of event streams creates challenges for conventional deep learning models, which are often too computationally intensive for low-power embedded platforms. This work presents a compact and configurable event-driven autoencoder that efficiently compresses neuromorphic data while preserving essential spatiotemporal structure for downstream inference. The architecture integrates lightweight convolutional encoding with robust performance under adaptive event thresholding and a minimal classifier head, enabling substantial reductions in computational cost without degrading recognition fidelity. Extensive evaluations on the Smart Event Face Dataset (SEFD) and Event-Based Crossing Dataset (EBCD) show that the proposed framework achieves competitive or superior accuracy compared to YOLOv9 while requiring up to 35.6$\times$ fewer parameters. To assess real-world sustainability, the model is deployed on resource-constrained hardware: a Raspberry Pi 4B and a NVIDIA Jetson Nano. On NVIDIA Jetson Nano, it delivers real-time throughput of 44.8 FPS. On a Raspberry Pi 4B CPU, the 50\% autoencoder classifier consumes 16.19 J for the evaluated inference workload, corresponding to approximately 726.3$\times$ lower energy consumption than YOLOv9 under the same evaluation protocol. These results demonstrate the potential of compact event-driven models to advance environmentally conscious, low-power AI systems for high-speed perception in autonomous, mobile, and embedded computing environments.
Streaming reconstruction of Free-Viewpoint Videos (FVVs) supports immersive Internet of Things (IoT) services, such as telepresence and digital twin visualization. Existing methods suffer from high per-frame optimization time and large storage footprints, limiting deployment on resource-constrained Edge-IoT devices. To address these challenges, we propose Structured Sparse Gaussian Streaming (S$^2$GS), an FVV reconstruction framework that exploits structure-aware temporal sparsity to selectively update Gaussian residuals, enabling efficient streaming without compromising visual fidelity. In the spatial domain, a streaming octree hierarchically organizes Gaussian residuals, capturing spatial correlations that guide residual updates. In the temporal domain, a structured gating mechanism, comprising hierarchical feature propagation (HFP) and Gumbel-Sigmoid sampling, converts hierarchical dynamic cues into sparse residual update decisions under differentiable optimization. A multi-level discrete scheme is further adopted to provide fine-grained control over residual updates while preserving intricate dynamic details. Extensive experiments across consumer GPUs, industrial edge IoT devices, and a physical telepresence testbed demonstrate that S$^2$GS consistently reduces per-frame optimization time and storage footprint while maintaining competitive visual quality. Compared with QUEEN, S$^2$GS reduces per-frame optimization time by 59% and storage costs by 85% on an RTX 4090 GPU. On the Jetson AGX Orin, S$^2$GS delivers the highest rendering throughput (60+ FPS) and the lowest energy consumption among the evaluated methods, demonstrating its potential for deployment in resource-constrained systems.
Zlatan Feric, Amir Taherin, Yanzhi Wang +1cs.AI cs.CL cs.DC cs.IR cs.PF
Retrieval-augmented generation (RAG) improves language-model responses by grounding generation in external passages, which comes with overhead: retrieved context lengthens the prompt, increasing prefill work, KV-cache footprint, memory traffic, latency, and energy. Context compression offers a natural remedy by pruning retrieved text before generation. However, state-of-the-art context-compression methods are typically used with a fixed compression budget, or with the rate selected offline and then applied at inference time. This static view ignores both workload variation and the live state of the edge device. On an edge SoC, compression is not free: the compressor itself runs on the same SoC and consumes latency and energy that can offset any generation savings. This paper proposes a vision for telemetry-informed adaptive compression in edge RAG, grounded in experimental evidence. We characterize the compression tradeoff on the NVIDIA Jetson AGX Thor using Llama and Qwen generators, Natural Questions and HotpotQA datasets, and LLMLingua-2 compression. Our measurements show that generation dominates the RAG budget for larger models, reaching roughly 90% of per-query latency and 91% of GPU energy for 7B-8B generators. Exploring the impact of the compression rate reveals an adaptive operating region: mild compression can miss energy opportunities, and overly aggressive compression can hurt inference quality. Intermediate compression can reduce GPU energy by up to 53.2%, and SoC energy by up to 48.2%, with negligible quality loss. We argue for runtime policies that dynamically manage compression, guided by workload features and edge telemetry.
Split federated learning (SFL) has emerged as a powerful paradigm for model training at the edge. However, SFL inherently involves discrete decision variables for model splitting and resource allocation, resulting in a challenging mixed-integer problem. Consequently, prior optimization schemes for SFL are either \textit{heuristic} or \textit{computationally inefficient}, which cannot handle large-scale user populations. To address this limitation, this work establishes an efficient optimization framework for SFL under resource-constrained networks. Our framework jointly optimizes model splitting and resource allocation to minimize training cost, which is defined as the weighted sum of latency and energy costs. We first study the model splitting problem and develop a polynomial-time algorithm that achieves the global optimum. Then, we extend the approach to the joint model splitting and resource allocation problem. In this case, we formulate it as a two-dimensional master problem and develop an efficient approximation method with a $(1+ε)$-approximation guarantee. Extensive experiments show that the proposed approach provides efficient solutions to strike the optimal energy--latency tradeoff.
AI-RAN brings large language model (LLM) serving close to mobile users, but cellular handover can separate an active request from its inference state: the user attaches to a target base station (gNB) while the large and growing key-value (KV) cache remains at the source. Retaining inference at the source preserves service continuity but persistently increases inter-token latency (ITL), whereas recovering the state at the target restores serving locality but requires KV-cache transfer, recomputation, or a combination of both only after handover, directly prolonging service interruption time (SIT). This work presents Pallas, a \textit{proactive} KV-cache migration framework that prepares the inference state at the predicted target before handover, in parallel with ongoing source-side inference and token delivery. At the preparation trigger, Pallas partitions the token sequence into a stable historical prefix and an evolving suffix. The target reconstructs the prefix through local prefill, while the source streams the KV blocks generated for the suffix. At handover, the target assembles both portions into an up-to-date KV cache and resumes decoding locally, leaving only unfinished preparation to contribute to SIT. An online scheduler selects the \textit{prefetching window}, which determines how early preparation begins before handover, based on mobility predictions and runtime telemetry. Across three LLMs and $100$--$500~\mathrm{Mbps}$ inter-gNB links, our vLLM-based prototype reduces average SIT by factors of $2.28$--$89.68$ over target-side recovery approaches and lowers average ITL by $16.0\%$--$50.0\%$ compared with source-side forwarding.
Rajat Bhattacharjya, Yoomee Jung, Minwoo Kim +4cs.DC cs.AI cs.CV cs.RO eess.SY
Reasoning segmentation enables vision-language models (VLMs) to translate mission-relevant language requests into pixel-level visual grounding, offering a natural perception interface for embodied agents. However, existing benchmarks largely focus on generic visual scenes and overlook the domain and resource constraints encountered in flood-response platforms. We present FloodReasonBench, a benchmark for VLM reasoning segmentation for embodied flood response at the edge. At its core, FloodReasonBench introduces FloodResponseSeg, a flood-specific reasoning-segmentation dataset constructed from real-world scenes and response-relevant targets. Beyond task accuracy, the benchmark characterizes reasoning-segmentation pipelines under lightweight visual encoding, hierarchical split inference, and compressed intermediate representations. We observe strong partition-dependent accuracy variation in the generic pre-adaptation setting, while the flood-adapted target-workload design space exhibits a substantially more compact accuracy range across partitions. Evaluation on an NVIDIA Jetson AGX Xavier further exposes the tradeoffs among reasoning-segmentation accuracy, edge-side latency, energy, and communication footprint, enabling quality-constrained selection of edge operating points. Together, these results provide a task- and system-level characterization of reasoning segmentation for resource-constrained embodied flood response at the edge.
Embodied intelligent virtual agents are expected to operate as persistent, adaptive, and context-aware entities within complex virtual and Metaverse worlds. However, implementing cognitively capable agents in such environments is conceptually and technologically challenging. Among a range of blueprints and development approaches, the Cognitive Embodied Agent Architecture (CEAA) has been developed as an implementation-oriented framework for architecting components of perception, memory, reasoning, planning, and embodied action. Considering the recent advances in edge computing and generative AI language models, this paper explores the use of Small Language Models (SLMs) to support edge-based operation of selected CEAA components, focusing on "Think" and "Memory" as processes central to cognitive orchestration and persistence of virtual agents in interactive virtual worlds. An edge-based virtual agent gateway system was developed and evaluated on an NVIDIA Jetson Orin NX using Qwen2.5 models of different sizes, exploring the system's capability to process service requests and handle memory-driven conversations. A series of simulation experiments evaluated routing accuracy, memory-read performance, and latency, demonstrating an SLM-driven prototype agent system that partially implements selected CEAA processes to support the development of embodied agents whose cognitive "brain" can operate efficiently and contextually for interactive experiences in immersive virtual worlds.
Medical AI has demonstrated specialist-level diagnostic accuracy, yet these capabilities remain largely inaccessible in resource-constrained rural settings where bandwidth is scarce, compute is limited, and clinical decision-making requires integrating heterogeneous modalities. We introduce a cloud--edge collaborative architecture that addresses these constraints: lightweight, domain-specific models on the edge transform raw medical data into compact structured outputs, while a cloud LLM synthesizes these outputs into clinical summaries. An LLM-based orchestrator dynamically selects diagnostic tools based on patient context, promoting comprehensive modality coverage without processing irrelevant inputs. We evaluate on 20 multimodal clinical cases spanning cardiac, obstetric, trauma, and screening scenarios under three simulated network profiles (500,kbps--5,Mbps). The hybrid system achieves 98--99% diagnostic tool recall with 92--96% precision, matches or exceeds cloud-only baselines on clinical accuracy, and maintains bandwidth-invariant latency (25--35,s) at 4--15x lower token cost. These results highlight the role of architectural design in enabling efficient multimodal integration and improving factual grounding compared to cloud-only approaches under deployment constraints.
Matthew Arboleda, Ryan Arboleda, Sophie Haak +6cs.AI cs.CL cs.SD
Detecting phonemes from children's speech has historically been difficult due to the scarcity of training data, and unique characteristics of children's speech. During a phoneme detection competition, we found that training a lightweight model to predict the age of the learner, as well as the phoneme sequence, enabled a 94M-parameter model to outperform WavLM Large models (317M) on the target DrivenData distribution, and fall within approximately 0.04 CER of competition ensembles with 90 times the parameters. This has enabled the creation of PhonemeTrainer, an application that can run on most modern cellular phones. This will ultimately enable better Automated Speech Recognition (ASR) and pronunciation helper apps for children's speech, with the privacy and compliance benefits that come with edge processing.
Xulin Fan, Juan Azcarreta, Ashutosh Pandey +5cs.SD cs.LG eess.AS
Low-latency, low-compute speech enhancement is essential for wearable devices with real-time communication requirements, but strict computational constraints significantly limit on-device performance. Knowledge Boosting has been proposed as an effective approach to improve edge model performance by leveraging a more capable server-side model, but performance gains for speech enhancement have been limited. We propose a collaborative framework incorporating three techniques: (1) delayed server output as additional input, (2) layerwise feature boosting that transfers intermediate server representations to guide edge inference, and (3) collaborative multichannel Wiener filtering, which fuses weighted covariance matrices estimated from both server and edge models for improved beamforming. Experimental results demonstrate that the proposed collaborative framework significantly outperforms the edge-only baseline with minimal additional computational overhead.
Lucas Gouveia Omena Lopes, William W. M. Lira, Alexandre M. Lima +1cs.CV cs.LG
Traffic data collection is dominated today by deep object detectors followed by tracking-by-detection, a pipeline that presupposes what is often missing in practice: a detector already trained on the class one wants to count. We revisit a purely geometric traffic-sensing pipeline for Single Board Computers in which detection is class-agnostic: moving objects come from background subtraction and thresholding, and counting is decided by a geometric rule on an imaginary line across the road, a software inductive loop detector. With no object model, training set or per-object trajectory, it runs faster than real time on Raspberry Pi class hardware. Two counting rules are described: a constant average speed rule, whose expected accuracy is derived analytically as about 86% under a Gaussian speed distribution, and a self-calibrating pre-calibration rule that recovers the lane geometry from blob statistics and counts edges of lane occupancy, additionally yielding per-vehicle average speed at no extra cost. Over four videos the latter counts with 83.3%-100% accuracy; in a field deployment it reaches 91% against 37.5% for a blob-tracking baseline under the same compute budget. We report the observations of that period in detail: the resolution floor below which accuracy collapses, the frame rate floor at which vehicles alias past the counting line, the gap between short curated clips and long uncontrolled footage, and the trade-off between Python (easier to tune, 100% CPU) and C++ (40% CPU, thermally viable). These are properties of the sampling geometry, not of the hardware of the time, and still constrain edge deployments. We close by arguing where motion-based, class-agnostic detection remains the right tool: open-set classes with no annotated data, tight power budgets, privacy-constrained installations, and the cold start of mining training crops to bootstrap a learned detector.
Deploying three-dimensional deep learning frameworks to low-power embedded processors is bottlenecked by the unstructured nature of spatial data and the resource-intensive distance sorting algorithms often used before neural network inference. To address this gap, this paper presents a hardware-constrained workflow optimized for native execution on the Raspberry Pi 5. To account for the reality gap between noiseless, clean computer-aided design (CAD) datasets and real-world sensor data, we use physics-based simulation to construct a synthetic LiDAR dataset. Cross-dataset evaluations demonstrate a substantial drop in classification accuracy when networks trained on clean CAD data are evaluated on synthetic LiDAR sensor data, highlighting the critical need for sensor-aware training. To address the latency bottleneck of traditional geometric preprocessing on edge CPUs, we integrate an isolated, feature-driven Critical Points Layer (CPL) as a frontend filter. Our results show that the pretrained CPL deterministically compresses raw 1024-point clouds to a subset of 40 to 60 unique coordinates. When profiled on the ARM Cortex-A76 processor, the complete pipeline achieves an inference throughput of approximately 50 FPS while maintaining an instance classification accuracy of 88.36%, demonstrating the viability of deterministic real-time 3D perception at the edge.
Real-time human action recognition on Internet-of-Things (IoT) edge devices requires models that capture rich spatio-temporal cues within strict latency, memory, and power envelopes. Current 3D CNNs, video transformers, and shift-based ViT deliver high accuracy but come at computational costs that preclude edge IoT deployment. This paper proposes CoDAT, a Collaborative Dual-Attention Transformer that replaces conventional multi-head attention with a lightweight dual-branch module: Spatial Convolutional Attention (SCA) for local aggregation and Strided Single-Head Attention (SSHA) for global context. SSHA jointly compresses the spatial resolution and channel dimensions of the query, key, and value tensors via stride-based sparse projection, then fuses the resulting global and local features at a markedly reduced cost. To enable temporal communication across frames, a parameter-free TShift module is embedded in each block. Extensive experiments on Jetson AGX Orin and Raspberry Pi 5 demonstrate that CoDAT achieves an energy-accuracy balance in both image and action recognition. On ImageNet-1K, CoDAT-M runs 2x faster than EfficientViT384 and FastViT-S12 at comparable accuracy, and CoDAT-L matches ViT-S with 3x fewer parameters at 2x higher throughput. On Kinetics-400 and MA-52, CoDAT achieves competitive Top-1 accuracy against state-of-the-art CNN, transformer, and hybrid baselines while running up to 2.9x faster than VSwin-T, 2x faster than ViT-Temporal-Shift variants, and 5x faster than UniFormer-B. On UCF-101, CoDAT-S384 matches TokShift and LAPS while being 6x faster and requiring up to 13x fewer FLOPs, establishing an efficiency-accuracy balance for real-time action recognition in edge IoT perception systems. Code is available at https://github.com/novendrastywn/CoDAT .
Biological visual systems can perceive depth from monocular vision flow, continuously integrating temporal visual cues while maintaining a balance between stability and plasticity in dynamic environments. In contrast, artificial perception models deployed on resource-constrained edge devices are typically trained in a static offline manner and remain frozen after deployment, often suffering severe performance degradation under domain shifts. While large-scale models may encode broad knowledge through massive parameter redundancy, lightweight networks face a static optimization dilemma: forcing compact models to learn universal geometric representations is computationally inefficient and often leads to performance saturation. To resolve this issue, an Online Active Learning (OAL) mechanism is introduced to endow compact neural networks with the capability to adapt continuously during operation. A closed-loop Predict-Evaluate-Correct learning paradigm is established to actively select high-confidence, information-rich signals from streaming visual input. Crucially, Elastic Weight Consolidation (EWC) is employed not merely to prevent catastrophic forgetting, but to enforce Selective Plasticity, preserving parameters that encode globally relevant structural knowledge while allowing local alignment to newly observed environments. Built upon a MobileNetV3-Small backbone, the proposed system achieves approximately a 75% reduction in computational cost while maintaining competitive depth estimation accuracy. Experimental results demonstrate that adaptability is not solely determined by model size, but rather by how effectively parameter plasticity is regulated in dynamic environments.
Accurate traffic forecasting is essential for proactive resource management in edge computing, where service demand evolves dynamically across both space and time. In practical cellular edge systems, traffic exhibits strong spatial correlations among neighboring service regions and long-range temporal dependencies driven by user mobility and application behavior. Existing recurrent forecasting approaches can capture short-term dynamics but often struggle to model long-horizon traffic evolution under non-stationary conditions. To address this challenge, we propose a spatiotemporal graph Transformer framework that jointly models spatial interactions and temporal dependencies for traffic forecasting in edge computing. The framework employs graph neural networks to capture spatial correlations among service regions and leverages Transformer-based self-attention to learn long-range temporal patterns from historical traffic observations. By decoupling spatial representation learning from temporal reasoning, the proposed approach provides an effective mechanism for large-scale spatiotemporal traffic modeling. Extensive experiments on a real-world cellular network dataset demonstrate that the proposed graph Transformer consistently outperforms recurrent graph-based baselines, including GCN-RNN, GCN-LSTM, and GCN-GRU models, across multiple forecasting horizons. The resulting forecasts enable more effective proactive resource provisioning and reduce overload risk compared with reactive management strategies. These results highlight the potential of graph-enhanced attention mechanisms for building intelligent and adaptive edge computing systems.
Sign language recognition (SLR) enhances communication between hearing and hearing-impaired individuals. Although deep learning (DL) has achieved promising performance in SLR, its high computational cost limits deployment on edge devices. To address this challenge, we propose a lightweight reservoir computing (RC)-based approach for SLR. In the proposed method, MediaPipe extracts body and hand keypoints to capture the spatial and temporal dynamics of gestures. These keypoints are then processed by a hybrid reservoir computing (HRC) architecture that combines deep reservoir computing (DRC) and bidirectional reservoir computing (BRC), transforming the input into a high-dimensional dynamic representation. A ridge regression model maps the final HRC state to class labels. This HRC-based SLR method achieved Top-1, Top-5, and Top-10 accuracies of 61.12%, 86.05%, and 92.56%, respectively, on the Word-Level American Sign Language 100 (WLASL100) video dataset, demonstrating competitive performance compared to deep learning-based approaches. Additionally, due to the lightweight nature of RC, the training time was drastically reduced to only a few seconds compared with DL-based methods such as Bi-GRU.This method offers low computational cost, showing its potential for deployment on edge devices.
This paper investigates collaborative mobile edge computing (MEC) servers for large language model (LLM) inference under soft deadline constraints. In this system, to improve the quality of service, computations are expected to be completed within their deadlines. However, due to dependencies among tasks or subtasks, any missed deadline can lead to catastrophic consequences for the entire request. In this context, this work proposes an extended deadline mechanism with constrained flexibility. The main challenges lie in handling large-scale computations under strict latency constraints while limiting the number of allowable deadline extensions, especially in the presence of task dependencies within each request. To tackle these challenges, we develop a transformer-enhanced proximal policy optimization (PPO) framework that enables efficient collaboration among MEC servers. The proposed approach aims to maximize the number of tasks completed within their deadlines while minimizing the use of deadline extensions. By capturing temporal dependencies and cross-server interactions, the transformer improves decision-making for task migration. Simulation results demonstrate that the proposed method significantly outperforms conventional PPO and heuristic-based approaches in terms of task completion rate and overall system efficiency.
The deployment of Vision-Language Models (VLMs) in autonomous driving (AD) systems is constrained by on-board computing power, restricting vehicles to small VLMs (SVLMs) with limited perception and reasoning capabilities. Infrastructure-assisted AD alleviates this resource constraint by enabling collaboration with large VLMs (LVLMs) at edge servers. However, in dynamic vehicular environments, the utility of sensory data for downstream tasks decays rapidly, making timeliness of information a critical concern. To balance the accuracy gains of LVLMs with their latency-induced timeliness degradation, we develop a Timeliness-Aware Large-Small VLM Collaboration (TALSC) framework. Specifically, we first model the Age of Information (AoI) evolution for VLM inference and characterize the coupling among AoI, token length, and task performance to formulate a general timeliness metric. Building on this, we propose the TALSC online scheduling algorithm. Since scheduling decisions have a delayed impact on future timeliness metric and the output token number is unknown at scheduling time, we design a Lyapunov drift-plus-estimated-penalty algorithm and provides a guaranteed performance. In simulation, we first conduct a case study to derive a fitted timeliness metric based on nuScenes dataset, and further show that TALSC outperforms baselines under various communication and computing settings, achieving up to a 12.6\% normalized improvement in Micro-F1 score compared with the best-performing baseline.
Amr M. Zaki, Farhoud Jafari Kaleibar, Honggeun Ji +2cs.SE cs.AI
We introduce Orthogonal-Edge (OrEdge), a lightweight framework for real-time anomaly detection in multi-modal distributed software systems. Unlike existing approaches that rely on computationally expensive attention- and graph-based architectures, OrEdge leverages orthogonal-domain temporal representations to achieve accurate anomaly detection with substantially lower computational complexity and model size. It jointly analyzes heterogeneous monitoring data, including logs, metrics, and traces, to identify abnormal software behavior, capture temporal dependencies, and reduce redundancy across observability signals. At its core, OrEdge incorporates OrEdgeCore, a lightweight orthogonal-domain reconstruction module that captures recurring temporal patterns while suppressing transient variations. Evaluated on three real-world microservice datasets (MSDS, SN, and TT), OrEdge achieves competitive detection performance while reducing the reconstruction model size to at most 9.6K parameters, compared with 20K--143K parameters in existing methods. This compact design enables efficient deployment on resource-constrained edge devices: on Raspberry Pi platforms, OrEdge achieves sub-second inference and reduces inference latency by over an order of magnitude compared with existing approaches. Extensive ablation studies, sensitivity analyses, orthogonal basis evaluations, and qualitative case studies further validate the effectiveness of each design component. Overall, OrEdge demonstrates that orthogonal-domain temporal modeling provides an effective alternative to computationally intensive attention- and graph-based architectures, achieving a favorable balance between detection accuracy and computational efficiency for real-time multi-modal anomaly detection in edge environments. The code is available at https://github.com/theamrzaki/MicroService_Twin_Original.
Fin Gentzen, Marla Grunewald, Iulisloi Zacarias +2cs.NI cs.AI
Large Language Models (LLMs) are increasingly deployed as autonomous agents, transitioning from static conversational interfaces to dynamic systems capable of complex reasoning, tool execution, and decision-making. However, the operational reliability of these agentic AI systems is fundamentally challenged by the absence of reliable ground truth in open-ended environments and the risk of increasing operational drift over time. To address this challenge, we propose and experimentally evaluate an agentic AI framework, designed to enforce autonomous integrity within LLM-driven systems. We design a self-calibration mechanism that mitigates drift and dynamically approximates ground truth by incorporating an ARIMA forecaster, without requiring continuous human oversight. To demonstrate the effectiveness and reliability of our methodology, we apply it to the complex domain of profiling the resource usage of zero-knowledge workloads in edge computing networks. Experimental results show that the proposed self-calibrating agentic framework successfully profiles the zero-knowledge workloads, achieving a higher accuracy than baseline LLM agents by 91.7% for resource usage prediction and improving the prediction speed by 71.7% compared to pure profiling, establishing a robust foundation for deploying autonomous AI in decentralized infrastructures. Furthermore, the ground truth generation using the proposed ARIMA leaping algorithm is 52% faster than a standard ARIMA forecasting algorithm, while achieving the same accuracy.
Chinmaya Kumar Dehury, Boris Sedlak, Alaa Saleh +4cs.AI cs.DC
We are moving from an information age to the age of intelligence. A decade, or possibly less than that, data will not be the gold anymore rather the derived intelligence out of the data and the information we posses from the edge of the network. Existing Edge Intelligence research focuses mainly on two directions: using AI for edge resource management and deploying lightweight AI models on edge devices. However, existing edge computing research lacks an intelligence-centric framework in which derived intelligence is treated as a first-class, independently manageable entity that can be described, discovered, observed, shared, reused, and dynamically clustered across heterogeneous edge devices and applications. To address these research gaps, we introduced Clustered Edge Intelligence, a visionary intelligence-centric approach. The aim of CEI is to make intelligence a shareable and reusable first-class entity that can be independently represented, discovered, observed, exchanged, and managed across the distributed edge-cloud continuum. We present a three layer CEI architecture and examine enabling technologies and research dimensions, including intelligence inventories, semantic knowledge representation, communication, discoverability, observability, lifecycle automation, clustering mechanisms, marketplaces, interoperability, and standardization.
Civil aviation is safety critical and its operations, from flight decks and towers to ramps and maintenance, generate massive, heterogeneous data at the network edge. Yet cloud centric deployment of large Artificial Intelligence (AI) models often produces high task latency, lacks offline capability in communication denied environments, and requires centralizing sensitive data, raising privacy and sovereignty risks. Edge AI moves perception, prediction, and decision logic closer to the data producers via compression, collaborative inference, and split learning, thereby reducing latency, bandwidth, and exposure while enabling graceful operation during disconnections. This paper provides a panoramic view and a common understanding of edge intelligence tailored to civil aviation. We firstly articulate the operational motivations for edge AI, and then review recent techniques for edge inference and edge learning. We then introduce the organizational computing paradigms and the respective configurations in civil aviation environments; finally, we describe the emerging applications and the future research trends of edge intelligence in civil aviation. We argue that a refined edge solution can complement cloud foundations to deliver low latency, privacy preserving, and resilient AI services across the civil aviation lifecycle.
Stream-processing systems increasingly operate across heterogeneous mobile edge--cloud infrastructures, where workload volatility, resource contention, and stringent quality-of-service (QoS) requirements complicate decentralized scheduling. This paper proposes \emph{MAS-DecStream}, whose main contribution is \emph{LLM-MR-CNP}: an extension of the classical Contract Net Protocol with semantic CFP formulation, progressive context disclosure, multi-round proposal revision, negotiation memory, and deterministic validation. Edge-cluster agents refine natural-language offloading proposals from local observations, predicted resource states, and qualitative runtime context, while hard resource and QoS constraints remain deterministic. Experiments derived from the Alibaba ASI Trace evaluate the extension at three levels: single- versus multi-round CNP, rule-based versus LLM-assisted refinement, and fixed-model single- versus multi-round negotiation. Under the evaluated configurations, MAS-DecStream reduces latency violations to 3\%, eliminates resource overcommitment, reaches a conflict-resolution rate of 0.91 with 20 agents, and improves utility by up to 22\% over the multi-round rule-based baseline. A separate 25-case evaluation shows model- and prompt-dependent accuracy--cost trade-offs. The results provide initial evidence that multi-round CNP refinement is the principal protocol-level gain, with LLM assistance adding value for qualitative and uncertain runtime context.
Tam Bang, Hussam Abubakr, Emiliano de la Garza Villarreal +6cs.LG eess.SY
Urban intersections are among the most hazardous locations in road networks, posing significant risks to vehicles and vulnerable road users (VRUs) such as pedestrians and cyclists. The complexity of multi-agent interactions demands continuous, real-time monitoring systems capable of anticipating conflicts before they escalate into crashes. We present PRISA, a modular infrastructure LiDAR framework leveraging privacy-preserving, low-light-robust roadside sensors for long-term traffic observation and real-time risk detection at the edge. The framework comprises two core components: a sensing and perception layer and a plug-and-play risk assessment module. The latter automatically curates site-specific training data from accumulated perception outputs to train a trajectory prediction model without manual annotation. It then deploys the trained model for continuous motion forecasting and dual surrogate safety evaluation, using Time-to-Collision (TTC) for longitudinal conflicts and Predicted Post-Encroachment Time (PPET) for crossing and VRU-involved interactions. PRISA is evaluated on the public R-LiViT dataset and deployed on an NVIDIA Jetson AGX Thor at a live signalized intersection in Chattanooga, Tennessee. PPET-based assessment operates at 194~ms end-to-end latency over a 2.4-second predictive horizon, with TTC-based detection and perception remaining within real-time constraints, demonstrating practical feasibility for proactive multi-agent intersection safety monitoring.
Tam Bang, Hoang H. Nguyen, Lei Cheng +6cs.CV eess.SY
Reliable roadside perception of vulnerable road users (VRUs) remains challenging under occlusions, variable lighting, and diverse weather conditions, particularly under strict edge-computing and latency constraints. Existing multi-sensor fusion systems rely on cloud or server-grade infrastructure, creating a deployment gap at real-world intersections. We present CLIFE, an edge-native camera-LiDAR fusion framework that integrates targetless online calibration and lightweight late-fusion tracking entirely on a single embedded device, without cloud offloading. CLIFE adaptively refines camera-LiDAR alignment on demand and performs multi-sensor fusion and track association with O(N log N) per-frame cost. We deploy CLIFE across 12 signalized intersections in Chattanooga and conduct an in-depth evaluation at a representative intersection using synchronized camera-LiDAR data that spans diverse daytime, nighttime, and weather conditions. Our experiments demonstrate that the fusion architecture substantially enhances the perceptual range and robustness of the individual sensors under varied environmental and traffic conditions. The late-fusion core operates at 53.2 FPS on the Jetson AGX Thor, ensuring high throughput for real-time intersection-scale applications. By centering perception at the edge, CLIFE provides a deployable foundation for downstream safety applications, while reducing bandwidth and calibration overhead for agencies operating multi-intersection corridors.