Physics-integrated 3D Gaussian representations now allow reconstructed deformable objects to be simulated and rendered under explicit material models. Existing pipelines, however, assume that material parameters are known or manually specified, limiting their applicability when these parameters must be inferred from observed object dynamics. We propose KnockGS, an interaction-response PhysicalGS framework that estimates the elasticity and density scales of a 3D Gaussian object from its dynamics under a known applied force. Rather than treating physical simulation only as a forward process, we turn the force-induced response into a calibration signal: temporal response features are xtracted from the observed dynamics, the two material scales are estimated from those features, and the estimate is then frozen and written back into the same simulator so that it can be tested on an interaction it was never fitted to.We evaluate the framework on both parameter recovery and response-level fidelity. The estimated scales are compared against hidden ground truth, and the re-simulated object is measured against the target using 3D particle trajectories, response-curve statistics, and rendered-frame quality. Across five held-out material targets, our method recovers the scales substantially more accurately than response retrieval, global regression, or a fixed default material, and the frozen estimate remains predictive under interactions that differ in direction and in magnitude. Interaction response therefore carries enough information to calibrate material scales in physically grounded 3D Gaussian representations.Our study is a first step toward interactive PhysicalGS systems that calibrate a Gaussian asset whose rendered appearance and simulated response are consistent.
Ali Bahri, Hongliang Li, Soufiane Lamghari +2cs.CV
Estimating volumetric mechanical properties, including Young's modulus, Poisson's ratio, and density at each voxel, is intrinsically ambiguous from vision alone, as visually similar objects may have substantially different material compositions and physical behavior. Existing approaches predict these properties independently across voxels, overlooking the piecewise-constant material structure of real objects and producing noisy or inconsistent estimates for voxels that share the same material, while lacking an explicit mechanism to resolve visual ambiguity. We introduce ViWi (Vision Meets WiFi), an object-centric framework for volumetric mechanical-property estimation. ViWi represents each object using a compact set of material slots that aggregate evidence from voxels with a shared material identity and produce coherent slot-level property predictions. To complement visual appearance, ViWi incorporates a compact RF descriptor generated through WiFi-band electromagnetic simulation using permittivity and conductivity. The RF descriptor conditions the material slots with global composition cues that may be unavailable from images, while visual features preserve voxel-level spatial localization. Across volumetric mechanical-property and mass-estimation benchmarks, ViWi improves over the prior state of the art on four of six per-voxel metrics, while its vision-only variant improves all mass-estimation metrics. These results demonstrate that combining object-centric material structure with complementary RF evidence enables more accurate and physically coherent volumetric property estimation beyond what is possible from visual appearance alone.
Hoang Le, Joonwoo Kwon, Elkhan Ismayilzada +2cs.CV cs.AI
Inferring physical properties such as mass, stiffness, and elasticity from a single image is essential for simulation and embodied AI, yet most existing approaches rely on multi-view reconstruction or physics-based supervision. We introduce SiPhy, a unified framework for single-image physical property reasoning that aligns 3D-aware visual cues, depth with language-based material knowledge. From one RGB image, SiPhy samples pseudo-voxel points, extracts CLIP features, and grounds them to material candidates proposed by a VLM. A part-based contrastive aggregator enforces region consistency, while a heaviness-aware refinement improves thickness and volume estimation for dense objects. Across ABO-500, MVImgNet-100, and PhysXNet-100, SiPhy achieves state-of-the-art single-image performance, surpassing multi-view reconstruction methods by improving mass MnRE by up to 93% (vs. PUGS), reducing density MAE by 35.5% (vs. NeRF2Physics), and lowering Young's modulus error by 23.5%. We further validate SiPhy on real hand-object interaction datasets, demonstrating its potential as a data annotation engine for physical understanding from single-view imagery.
Faithful inverse rendering requires visibility and indirect radiance to explain secondary illumination and inter-reflection, yet rasterization-oriented Gaussian representations do not naturally support the secondary-ray queries needed to recover them. We present IRGS++ (Inter-Reflective Gaussian Splatting), a unified robust and efficient Gaussian inverse rendering framework. During transport-aware optimization, IRGS++ employs differentiable 2D Gaussian ray tracing on surface-oriented Gaussian primitives to query visibility and indirect radiance on the fly and evaluate the full rendering equation for inter-reflective transport. This physical core makes Gaussian inverse rendering physically grounded beyond rasterized appearance modeling. To make this backbone useful beyond low-gloss dielectric scenes, the framework incorporates metallic-aware material modeling and robust reflective initialization for glossy, specular, and metallic materials. To make it practical, multiple importance sampling and denoising stabilize finite-sample rendering, while mesh-based secondary-attribute queries reduce the cost of relighting under novel illumination. Quantitative evaluations on low-gloss and glossy benchmarks show improved decomposition and relighting quality together with favorable quality--speed trade-offs under the reported configurations, while real-world studies illustrate plausible relighting under novel illumination.
Physically based differentiable rendering has proven to be a powerful tool for inverse rendering problems (e.g., 3D reconstruction, reflectance estimation, lighting estimation). However, most existing methods operate solely on radiometric intensity, discarding valuable polarization cues that constrain scene geometry and material properties. While forward simulation of polarized light is well-defined via Mueller-Stokes calculus, extending reverse-mode differentiation to this domain presents significant challenges. The rank-deficient nature of common polarimetric operators, such as linear polarizers and diffuse reflections, violates the invertibility assumptions of standard gradient estimators like path replay backpropagation and results in numerical instability. We address this by proposing a robust, polarization-aware differentiable path tracing method. Our approach estimates unbiased gradients through a combination of path replay and local caching. This formulation enables efficient and stable optimization of material and lighting parameters in complex scenes, broadening the applicability of physically based inverse rendering. Project page: https://vcai.mpi-inf.mpg.de/projects/DPPT/
Raza Yunus, Benjamin Ummenhofer, Jan Eric Lenssen +1cs.CV cs.GR
Decomposing outgoing surface radiance into material and illumination during inverse rendering is essential for applications such as relighting and augmented reality, yet it is severely ill-posed since multiple combinations can result in the same observed colour. Capturing an object under multiple lighting conditions usually helps resolve this ambiguity as it constrains the optimization towards correct solutions. In this work, we explore the potential of reconstructing rigidly moving objects -- which provides observations of diverse light-surface interactions -- to resolve the material-lighting ambiguity in inverse rendering. For this purpose, we introduce a relightable approach that marries object tracking and reconstruction with inverse rendering for general rigidly moving objects. Our experimental analysis on synthetic data demonstrates that motion can be an advantage for disentangling material and lighting: the reconstructed material is significantly more accurate when the object is observed under rigid motion than when it is static. Moreover, results on RGB videos of real hand-held objects show that our pipeline preserves this advantage even under noisy real-world conditions.
Reconstructing physics-based 3D assets -- geometry, materials, and illumination -- from multi-view images is a core problem in computer graphics and vision, and a prerequisite for realistic relighting and editing. Physics-based inverse rendering offers an accurate image-formation model, but is severely underconstrained: without strong priors, illumination is baked into materials, and reconstructions generalize poorly to novel views and lighting. Data-driven diffusion models, in contrast, predict visually plausible materials, yet their predictions rarely satisfy the rendering equation and are not directly usable for physics-based rendering. We bridge these two paradigms rather than replacing either. Our key idea is to treat the predictions of a state-of-the-art diffusion model not as target material values but as a similarity kernel for optimization: we introduce a regularization loss that penalizes deviations in the optimized material over surface regions where the diffusion predictions are near-constant, while leaving the optimization free to match the input images. Built on this regularizer, our end-to-end pipeline jointly reconstructs geometry, materials, and illumination, yielding high-quality assets that drop into standard rendering pipelines and relight faithfully. On the Synthetic4Relight, Stanford-ORB, and DTC-Synthetic datasets, our method significantly outperforms state-of-the-art baselines in both reconstruction accuracy and relighting quality.
Adrian Ramlal, Yuhao Chen, John S. Zelekcs.CV cs.GR
Realistic visual simulation of food manipulation requires accurate material parameters, yet these are difficult to measure directly and vary across the heterogeneous regions of a single food item. We address the inverse problem of estimating material parameters from a target description of fracture behavior in a non-differentiable continuum damage mechanics simulator. Using orange peeling as a test case, we train a neural surrogate on 2,000 forward simulations and compare Covariance Matrix Adaptation Evolution Strategy (CMA-ES, a gradient-free evolutionary optimizer) with Proximal Policy Optimization (PPO, a reinforcement learning algorithm) across the original 9-dimensional parameter space and two learned 4-dimensional latent representations. Since different oranges have different material properties, a practical inverse system must handle arbitrary targets without retraining. We train a goal-conditioned PPO policy that learns a general inverse mapping: given any target description of peeling behavior, the policy produces a material parameter estimate in a single forward pass (8 surrogate evaluations, approximately 10ms). Operating in a normalizing flow latent space with a shared surrogate evaluator, the goal-conditioned policy achieves 0.642 actual recovery when validated through the simulator, outperforming the original parameter space by 23%. A warm-start extension that initializes CMA-ES refinement from the policy's output further improves recovery to 0.828 with 540 evaluations. These findings provide a practical framework for inverse food physics and lay groundwork for vision-driven material identification from video observations of food manipulation.
Physically based rendering (PBR) material estimation is a fundamental appearance decomposition task with broad applications in virtual content creation, relighting, and digital human rendering. However, estimating PBR materials from a single human image remains highly ill-posed, since illumination, geometry, and reflectance are heavily entangled in the observed appearance. To mitigate this ambiguity, we propose HAFMat, a hybrid-prior-guided framework for single-image human material estimation. Our method introduces guidance maps that encode complementary cues, including appearance, body geometry, structure, and prior material predictions from pre-trained models. A key observation is that these guidance cues are heterogeneous: some cues mainly provide texture-level constraints, while others convey higher-level semantic information. To exploit this property, we design a Multi-layer Adaptive Feature Fusion Mechanism, which adaptively fuses guidance features with decoder features at different stages. This design enables texture-dominant and semantic-dominant cues to guide material decoding at appropriate levels, leading to more accurate and physically plausible material estimation. Extensive experiments on both synthetic and real data demonstrate that our method achieves state-of-the-art performance in material estimation and downstream relighting.