Transformer-based object trackers are renowned for their strong performance, yet dense token processing often leads to prohibitive computational cost, limiting real-time deployment on edge devices. While recent works explore token pruning to reduce computation, they often stop short of an end-to-end sparse pipeline, as early-layer token scores can be noisy without a motion prior, and many trackers ultimately fall back to dense reshaping to feed the dense prediction head that partially negates the savings. We introduce Motion-aware Sparse Tracker (MaST), a sparse tracking framework that makes sparsity effective from tokens to boxes. First, MaST injects a lightweight motion prior to refine cross-attention-based importance scores, enabling earlier and more stable token reduction in the search region. Second, we introduce a natively sparse prediction head that operates directly on the retained unstructured tokens with a score-first, regress-once design, eliminating dense padding/reshaping and reducing redundant computation. Extensive experiments on multiple benchmarks demonstrate that MaST establishes new state of the art among lightweight trackers, where MaST-tiny attains 63.8 AUC on LaSOT and 80.1 SUC on TrackingNet, surpassing the prior best AsymTrack-S by +1.0 AUC and +2.2 SUC while running at 152 FPS on Jetson Nano, nearly twice as fast as AsymTrack-S at 88 FPS. Code is available at https://github.com/TsingWei/MaST.
This work presents an automatic bee entrance monitoring system based on YOLO11 transfer learning and the ByteTrack tracking algorithm. The study investigates the influence of data augmentation, backbone freezing, and tracker parameter optimization on the detection and counting of small, fast-moving bees. The detector with progressive backbone unfreezing strategy achieved about 97.0% precision and 98.7% mAP50, while providing more stable convergence than full fine-tuning. Experiments also showed that light augmentation outperformed heavy augmentation. For tracking, ByteTrack parameters were optimized to improve trajectory continuity under low-confidence detections. On an independent 25 FPS side-view video, the optimized YOLO11-ByteTrack system correctly counted 43 of 47 incoming bees (91.5%) and 7 of 30 outgoing bees (23.3%). Error analysis showed that most counting errors were caused by missed detections due to rapid bee motion and motion blur, while tracking failures became less frequent after parameter optimization. Overall, the results indicate that moderate augmentation, progressive backbone unfreezing, and ByteTrack tuning improve the reliability of automatic bee entrance monitoring under realistic recording conditions.
Reliable traffic sign detection is a prerequisite for the global deployment of autonomous driving systems, where regulatory compliance and road safety depend on perceiving signs correctly across regions, ranges, and weather conditions. Despite recent progress, vision-based methods continue to face three fundamental limitations: poor cross-regional generalization due to high diversity across countries, degraded performance on small-object detection at long ranges (traffic signs occupy as little as $10{\times}10$ pixels at 200m), and fragile temporal tracking under the strongly non-linear perspective distortion that occurs as a vehicle approaches a sign. In this paper, we address the problem of robust, long-range, region-agnostic traffic sign perception by combining camera and Light Detection and Ranging (LiDAR) sensing. We present a multi-modal detection framework whose Intensity-Aware Deformable Fusion module aligns retro-reflective LiDAR cues with camera features, anchoring detection on geometric invariants rather than region-specific visual appearance. We further introduce a dual motion-model tracker that explicitly accounts for non-linear perspective transformations during vehicle approach, substantially improving temporal consistency over linear motion assumptions. Additionally, we develop a semantic attribute classification pipeline that estimates occlusion level, readability, sign embeddedness, and road relevance, providing actionable context to downstream planning. Extensive evaluation on our dataset, spanning 60+ countries and 2,500+ hours of driving data, shows that the proposed pipeline achieves an Object Miss Ratio (OMR) of 0.49% across 221,068 evaluation sequences, demonstrating globally generalizable traffic sign perception in commercial-grade autonomous driving systems.
An estimated 138 million children remain in child labour worldwide, and the monitoring systems used by affected sectors, built on periodic household visits and interviews, systematically under-detect them. We present a real-time computer-vision pipeline, built and operated solely as a research prototype, that studies the feasibility of giving Child Labour Monitoring and Remediation Systems (CLMRS) a continuous, presence-based evidence channel. The pipeline combines a multi-task person and face detector (YOLO26x backbone in the CerberusDet framework), cascaded age estimation pairing MiVOLO v2 with a child-specialist model for ages 0-12, ByteTrack tracking, ArcFace and DINOv2 re-identification, and track-level fusion producing reviewable per-person records. The detector raises person mAP@0.5 from 0.390 to 0.683 over the previous-generation baseline; the child specialist reaches 1.944 years MAE on children-only validation, where widely used open-source stacks err by 18-23 years. FP8 TensorRT compilation yields a 1.77x speedup at +0.002 years MAE, bringing the pipeline above twice real-time on embedded hardware. On 26.8 hours of proxy video the system finds 634 unique child candidates versus 285 for its predecessor. We further report a seventeen-day unattended field pilot on a farm in Zimbabwe (38.7 million frames, six cameras) evaluated against a daily attendance register: software tuning improved detection yield 36-fold, and identity consolidation under a simultaneity veto cut over-reporting from 9.1x to 1.8-3.9x with zero proven-false merges. We document training and quantisation failures alongside successes, and the data-protection and human-in-the-loop safeguards such a system requires.
Hyperspectral object tracking leverages abundant spectral information to provide unique advantages for target discrimination in complex scenes. However, existing methods typically treat hyperspectral images as multi-channel extensions of RGB images, performing feature fusion in fixed band order. This approach leads to models dependent on specific sensor configurations while neglecting manifold relationships between bands, making generalization to heterogeneous sensors difficult. Moreover, the discriminative contribution of bands dynamically changes with target attributes and scene variations, further limiting the representational capacity of static fusion strategies. To address this, we propose the Manifold-Guided Spectral Prompt Network (MSP-Net). This network first reconstructs band relationships and forms adaptive spectral grouping through graph-driven manifold routing, then jointly integrates grouped spectral statistics with template appearance to construct target-related dynamic conditional prompts, enhancing target features while suppressing background interference. Furthermore, as tracking progresses, spectral conditions continuously evolve based on intermediate target representations, enabling target prompts to adapt in real-time to appearance and scene changes. Meanwhile, reliable historical states are used to constrain target localization and scale fluctuations, significantly improving temporal stability in cross-sensor tracking. Experiments on HOT2020 and HOT2023 demonstrate that MSP-Net achieves AUC and Precision exceeding 0.80 and 0.96, respectively, exhibiting exceptional robustness under heterogeneous sensors, target deformation, and complex background conditions. The code will be released at https://github.com/GGML668897/MSP-Net.
Dipit Saha, Shah Mohammad Abdul Mannan, Mohammad Raihan Rashid +2cs.CV
Traffic surveillance cameras capture accidents continuously, yet converting raw CCTV footage into structured event records that pinpoint when, where, and what type of collision occurred remains unsolved at scale. The ACCIDENT @ CVPR benchmark evaluates exactly this joint prediction under a strict constraint: no labeled real-world training data is available. We introduce a training-free, two-pass coarse-to-fine pipeline that pairs a frozen Qwen3-VL-32B-Instruct vision-language model with YOLO11x object detection and BoT-SORT tracking. A first pass sparsely samples the full clip to anchor the collision moment in time; a second pass re-examines a tight window around that estimate using frames annotated with stable vehicle identities and normalized bounding-box coordinates, which gives the model both a visual overlay and an explicit numeric description of the same scene. On the official 2,027-clip real-CCTV test set, our system achieves a three-way harmonic mean score of 0.504, surpassing all organizer-published baselines including the best multi-model ensemble (0.412) by a 22% relative margin.
Visual object tracking aims to continuously locate specific targets within sequential frames, evolving from single-modal methods to multi-modal ones. However, existing multi-modal trackers are typically designed for fixed modality combinations, requiring separate models for different inputs. This leads to a poor adaptability to missing or imperfect modalities, and limited generalization. To address these issues, we propose a novel unified framework called AnyTrack for object tracking with any modalities. Specifically, we design a Modality-aware Interaction Module (MIM) to facilitate dynamic interaction across diverse modalities. This module bridges modality discrepancies and aggregates temporal cues to maintain spatio-temporal consistency during cross-modal interaction. Furthermore, we introduce a Context Understanding Module (CUM) to establish spatial correspondence between visual features and target locations via global-local prompts. This module employs target-aware context modeling to enhance foreground-background discrimination for precise localization. Finally, to support the training and evaluation under diverse modalities, we extend existing multi-modal object tracking benchmarks by incorporating grayscale images, language descriptions, and audio clips. Extensive experiments with both complete and missing modality settings demonstrate that our AnyTrack achieves state-of-the-art performance, validating its effectiveness and flexibility. The source code is available at https://github.com/IdolLab/AnyTrack.
Haofan Cao, Zhichao You, Yunkai Yang +3cs.CV cs.LG cs.MM
Tracking links observations of the same object through visual change, yet cannot by itself determine when the object is empty or filled, intact or cut. We formulate identity-conditioned state-moment retrieval: given a tracked-object history and alternative state descriptions, localize an interval in which each described state holds. Absolute image-text similarity scores descriptions independently; because every visible frame depicts the same target, shared object compatibility can obscure the state evidence needed to identify the target interval. The alternatives provide the missing reference: evidence for one state should be measured against the others. We introduce Déjà Cue, a training-free framework that turns these alternatives into a vocabulary-relative coordinate system. It subtracts their state-balanced centroid from each description, calibrates frame scores, and scans multiple durations within contiguous visible runs using a frozen encoder. On 78 VOST histories, holding the temporal scan fixed and changing only the query reference nearly doubles R@1 at tIoU 0.5 from 10.3\% to 20.5\% and raises Top-1 tIoU from 16.0\% to 21.5\%. Candidate-rank analyses show that vocabulary-relative queries rank useful intervals higher within the same candidate set. Related state descriptions can therefore serve as an object-specific, query-time coordinate system for reading frozen visual representations.
Unified multimodal object tracking has achieved remarkable robustness by leveraging complementary sensor data (e.g., RGB, Thermal, Depth), yet the heavy computational burden of state-of-the-art models hinders their deployment on resource-constrained edge devices. In this work, we identify the prediction head as a critical but often overlooked efficiency bottleneck. By strategically streamlining the decoder architecture, we unlock the potential for real-time inference but simultaneously introduce a capacity gap between the lightweight student and the heavy teacher. To resolve this, we conduct a systematic analysis of 17 distillation strategies and introduce a Dual-Alignment Distillation framework. Our key insight is that effective compression requires decoupling knowledge transfer into two complementary streams: (1) Spatial Representation Alignment, which employs feature distillation to sharpen the student's spatial focus on foreground targets ("Where to track"); and (2) Semantic Distribution Alignment, which utilizes logit-based distillation to align decision boundaries and transfer discriminative dark knowledge ("What to track"). Extensive experiments across five benchmarks demonstrate that our approach significantly outperforms complex state-of-the-art methods. Notably, our distilled model achieves 91.5% MPR on RGBT234 and operates at 54 FPS on a single RTX 4090, representing a 5x speedup over the teacher model while maintaining superior accuracy.
UAV Anti-UAV tracking is an emerging low-altitude security task for localizing an adversarial UAV using the onboard camera of a moving observer UAV. It differs from conventional UAV tracking and ground-based Anti-UAV tracking because both the camera platform and the target move simultaneously. This dual-dynamic setting induces rapid viewpoint changes, motion blur, scale variation, and visually similar distractors, making reliable appearance matching difficult. Under such rapidly changing conditions, fixed visual representations are often insufficient because target appearance becomes unreliable and feature distributions may deviate from the training domain. The target language description remains stable across frames and can therefore serve as a semantic anchor for temporal state propagation, while online feature-distribution alignment can reduce video-specific test-time shifts. In this paper, we propose \emph{SATATrack}, a Semantic-Aware Temporal Adaptation framework for UAV Anti-UAV tracking. SATATrack introduces Semantic-Aware Context Propagation (SACP), which uses the target description to guide temporal context propagation across backbone stages and preserve target identity under rapid appearance changes. An auxiliary contrastive regularizer is used during training to discourage responses to semantically similar background regions. During inference, Temporal-Aware Distribution Alignment (TADA) aligns feature distributions online without updating model parameters, combining recent-frame estimates with training-time statistics for stability. SATATrack achieves state-of-the-art performance on the UAV-Anti-UAV benchmark while remaining competitive in Anti-UAV and UAV object tracking tasks. The code will be available at https://github.com/XiaozhenQiao/SATATrack.
Unmanned Aerial Vehicle (UAV) object tracking has emerged as a popular research field with broad practical applications. Modern UAVs are increasingly equipped with both visible light and thermal infrared sensors. However, due to constraints in communication bandwidth, computational resources and power consumption, current systems often activate one modality and switch between modalities to maintain robust tracking in complex scenarios. Such modality switch inevitably leads to significant appearance change and sudden spatial shift, posing great challenges for existing tracking algorithms. To handle this problem, we propose a novel State-Aware Representation Learning Approach called SARLA, which perceives the inconsistent modality states of current frame with template and last frame in the target representations to adapt to the sudden changes in both appearance and position, for robust cross-modal object tracking. In particular, we propose the Modality State Aware Representation Module (MSARM) and Spatial State Aware Representation Module (SSARM). MSARM guides the model to learn appearance correlation, bridging the modality gap, while SSARM models cross-frame spatial correlation to mitigate sudden spatial shift impacts. In addition, we design a spatial shift prediction loss to further handle the effects of spatial variation caused by modality switch. To promote the development of this research field, we establish a large-scale video benchmark called CM-UOT, which consists of 1079 cross-modal sequences with an average video length greater than 621 frames and encompasses over 671K frames in total. Extensive experiments on CM-UOT dataset demonstrate the superior performance of the proposed SARLA against 20 excellent tracking methods. The source code, datasets, and evaluation protocols associated with this work are publicly available at: https://github.com/hongsmile365/sarla-.
Jakub Mandula, Sebastian Heusinger, Julian Moosmann +2cs.CV
Detecting UAVs in air spaces has become increasingly important due to UAVs widespread availability and easy usage. However, due to their small size, they are typically difficult to detect at a sufficient range. For the training of optimized detection algorithms, datasets have been published, covering optical sensing methods ranging from infrared to regular RGB to event-sensor-based. However, these datasets often fail to reflect realistic counter-UAV scenarios, lacking critical factors such as camera ego-motion, extremely small target scales, and diverse lens configurations, and introduce compression artefacts on the frame images. To address this gap, we introduce SkyEV, an open-source dataset featuring highly synchronized uncompressed RGB and event-based data. SkyEV distinguishes itself by capturing complex real-world conditions, including significant camera motion and varied optical setups, which are essential for testing the fundamental trade-off between Field of View and detection range. Furthermore, we provide a unified data loader and establish an experimental baseline using a multi-modal architecture, demonstrating the dataset's efficacy in detecting challenging, small-scale targets.
Mei Yuan, Qi Long, Qifeng Wu +5cs.CV cs.AI cs.CL cs.MA
Industrial Video Anomaly Detection (IVAD) aims to identify anomalous objects and events in an industrial process, which is crucial for modern manufacturing and quality control systems. Existing VLM-based anomaly reasoning methods are capable of detecting open-ended anomalies in general domains. However, their performance declines in industrial settings characterized by intricate object transformations, strict physics, and procedural constraints. To tackle the complexity of such interaction-intensive detection, we introduce a training-free agentic framework for anomaly detection free of domain-specific knowledge, emphasizing object state evolution like humans inspectors. It is designed to track spatial-temporal dynamics and underlying transformations of detected objects over time, and then reason over the object-wise temporal state trajectories to identify abnormal objects in grounded frames. Our method overcomes limitations of prior approaches that rely on retraining on normal clips or injecting domain knowledge as context for test-time inference. Extensive experiments on three IVAD datasets demonstrate that our method outperforms frontier VLMs, agentic frameworks, and traditional VAD methods fine-tuned on the respective datasets, while providing interpretable reports over anomaly processes and types.
Surgical video understanding is fundamental to navigation systems. Endoscopic perception is often hindered by a limited field-of-view and frequent instrument occlusions, making spatio-temporal context essential for robust inference. These challenges have motivated video models that aggregate information across frames. However, existing video models typically store past observations implicitly in learned feature representations, often requiring task-specific video training, substantial annotated data, and increased computational cost. We propose Stitch-Inferencer, a real-time, model-agnostic inference framework that replaces implicit feature memory with an explicit image-space panoramic canvas. By stitching valid observations across frames, Stitch-Inferencer preserves previously observed pixels in an online, instrument-free view, expanding the effective field-of-view and providing direct access to regions that are temporarily occluded or absent from the current frame. Downstream segmentation or tracking models are applied to a compact region of interest on the panorama, and their predictions are reprojected to the current frame, enabling existing models to exploit long-range context without retraining. Experiments on anatomy segmentation and point/box tracking demonstrate consistent improvements across diverse baselines while preserving real-time throughput. The stitching module alone runs at over 60 FPS, providing a practical inference-time solution to enhance endoscopic perception in computationally constrained intraoperative environments. Source code will be made publicly available.
Thermal infrared (TIR) imaging is essential for UAV swarm operations in visually degraded environments. However, tracking tiny UAVs remains challenging due to limited appearance cues, frequent occlusions, and rapid maneuvers. Despite significant progress driven by benchmarks such as the Anti-UAV challenge, existing methods primarily prioritize accuracy while overlooking the computational constraints of real-time edge deployment. The standard Kalman Filter (KF) offers the efficiency required for edge devices, yet its constant-velocity assumption often breaks down under highly dynamic UAV motion and thermal sensor jitter. More sophisticated nonlinear estimators can improve robustness but often introduce additional computational costs. To address this gap, we propose an edge-aware online tracking pipeline centered on the Adaptive Kinematic Kalman Filter (AKKF), which augments the linear KF with state-dependent kinematic modeling while preserving real-time efficiency. Combined with transient false-positive suppression and kinematics-driven predictive coasting, the presented pipeline improves trajectory continuity under challenging TIR conditions. Experiments on the Beyond Strong Baseline (BSB) benchmark provide a starting point for edge-aware UAV tracking by jointly evaluating tracking performance and computational efficiency, offering insights toward future real-time deployment.
Haidong Wang, Hengxing Cai, Wanlei Li +2cs.CV cs.RO
Intelligent Transportation Systems deployed on highways predominantly rely on conventional RGB cameras for traffic perception and vehicle tracking. However, highway environments present unique challenges: the absence of artificial lighting infrastructure, combined with high vehicle velocities, results in severely degraded perception performance under low-light conditions. Specifically, nighttime scenarios suffer from motion blur, insufficient exposure, and poor signal-to-noise ratios, which catastrophically impair the reliability of RGB-based sensing systems. To address these limitations, we propose a novel Joint Event-RGB Adaptive Tracking (JEAT) framework. Unlike existing multi-sensor trackers constrained by rigid, hard-coded prioritization, JEAT merges asynchronous event streams and RGB frames into a unified joint data association optimization. By employing an Adaptive Extended Kalman Filter to continuously estimate measurement noise via NIS statistics, the framework dynamically weights and fuses both modalities, optimally harnessing event streams during dark or high-speed motion while leveraging RGB frames under bright or static conditions. Furthermore, given the absence of publicly available datasets tailored for event-based highway perception with diverse environmental conditions, we present SEHN, a large-scale synthetic dataset generated using the CARLA simulator. Our dataset encompasses diverse environmental conditions (daytime, nighttime, nighttime with out artificial lighting) and varying traffic densities, providing synchronized RGB imagery and event streams to facilitate multi-modal fusion research. Our code and datasets will be available at https://github.com/haidongwang96/SEHN.
Event cameras offer microsecond-level temporal resolution and high dynamic range for low-altitude UAV perception. However, long-range UAVs often produce sparse, fragmented, and noise-contaminated event responses, where one semantic target may appear as multiple spatially separated blobs. Direct blob-level asynchronous tracking therefore suffers from duplicate trajectories and unstable identities. We propose ASUMOT, a motion-consistency-based asynchronous UAV detection and tracking framework operating directly on raw events. ASUMOT models each UAV as a set of motion-consistent event blobs. A local motion-consistency estimator triggers reliable candidates, a lightweight multi-task verifier provides UAV confidence and motion-direction cues, and motion-consistency clustering aggregates fragmented blobs into identity-consistent UAV tracks. We also introduce ES-UAV, a high-definition event-level UAV benchmark with dense semantic annotations. Experiments on public UAV tracking data and ES-UAV show that ASUMOT improves the accuracy--efficiency trade-off while preserving asynchronous event processing. Code and Dataset will be released.
Turning movement counts are essential for intersection-level traffic management, yet their collection remains predominantly manual due to the cost of per-camera region annotation. This paper presents an unsupervised pipeline that identifies entry and exit regions directly from raw vehicle trajectories extracted via object detection and multi-object tracking, requiring no manual annotation, camera calibration, or prior knowledge of intersection geometry. Unlike trajectory clustering methods that classify individual trajectories using pairwise similarity and must be re-executed on every new batch, the proposed pipeline clusters initial and terminal point locations to produce persistent spatial region polygons that classify future trajectories by point-in-polygon containment at linear cost. The pipeline comprises six sequential steps, five of which introduce configurable parameters evaluated through a systematic statistical analysis spanning 17,100 pipeline executions across 9 surveillance cameras capturing dense heterogeneous traffic in Bengaluru, India, and 10 sequences from the UA-DETRAC benchmark dataset. Both parametric and nonparametric testing frameworks identify three consistently significant parameters and yield an empirically grounded recommended configuration. Under this configuration, the pipeline achieves a median classification error of 3.4% across all 25 Bengaluru cameras, including 16 held-out locations, with a median per-turning-movement GEH of 2.43. Compared with two trajectory clustering baselines, the proposed pipeline exhibits greater stability across camera views and lower computational cost, at the expense of higher median error. Extended evaluation demonstrates that calibration clips of at least 60 minutes and peak-traffic selection further improve region estimation quality.
Raza Yunus, Benjamin Ummenhofer, Jan Eric Lenssen +1cs.CV cs.GR
Decomposing outgoing surface radiance into material and illumination during inverse rendering is essential for applications such as relighting and augmented reality, yet it is severely ill-posed since multiple combinations can result in the same observed colour. Capturing an object under multiple lighting conditions usually helps resolve this ambiguity as it constrains the optimization towards correct solutions. In this work, we explore the potential of reconstructing rigidly moving objects -- which provides observations of diverse light-surface interactions -- to resolve the material-lighting ambiguity in inverse rendering. For this purpose, we introduce a relightable approach that marries object tracking and reconstruction with inverse rendering for general rigidly moving objects. Our experimental analysis on synthetic data demonstrates that motion can be an advantage for disentangling material and lighting: the reconstructed material is significantly more accurate when the object is observed under rigid motion than when it is static. Moreover, results on RGB videos of real hand-held objects show that our pipeline preserves this advantage even under noisy real-world conditions.
The recently established 'Out of Sight, Not out of Mind' (OSNOM) task for egocentric videos focuses on tracking objects that are moved by the camera wearer, online, maintaining knowledge of instance locations throughout the video even when they leave the field of view or become heavily occluded. In this paper, we propose the first learning-based solution to the OSNOM task: Whareformer, a transformer-based model with two components: an updatable memory of established tracks and a track assignment module that associates observations with existing tracks in a feed-forward manner. Whareformer jointly reasons over evolving object appearance (what) and updated 3D location (where), and employs a dedicated New Track token to reason about novel objects. Thanks to its design choices of using relative distances and evolving track representations, Whareformer is trained on a small set of 56 videos but achieves SOTA performance on 260 long test videos from three datasets: EPIC-KITCHENS-100 (unseen videos), IT3DEgo, and HD-EPIC, with significant absolute improvements over prior work.
Robust dynamic object detection and tracking are essential for enabling robots to operate safely and effectively alongside humans in complex environments such as construction sites. While LiDAR-based SLAM and occupancy grid methods offer viable solutions for detecting and tracking motion, many state-of-the-art 3D vision approaches rely heavily on pre-trained neural networks and require additional post-processing to identify moving objects. Sensor fusion techniques, combining the precision of LiDAR with the semantic richness of RGB imagery, offer a promising alternative. In this work, we present a novel framework that enhances a quadruped robot equipped with a LiDAR sensor and an upward-facing fisheye camera for real-time dynamic object detection and tracking. After identifying moving objects within a registered point cloud, our method assigns semantic labels by projecting 3D coordinates onto a 2D cylindrical panorama, aligning with real-time image-based detections for observation update of the Kalman filter. The proposed system demonstrates high precision, simplicity, and robustness, particularly in handling objects transitioning between dynamic and static states, thus it is well-suited for deployment in real-world construction environments.
Multispectral image(MSI) and hyperspectral image(HSI) object tracking object tracking exploits recorded band-wise observations to improve target--background discrimination under similar RGB appearance, mixed pixels, illumination variation, occlusion, and clutter. However, existing trackers commonly process all search regions through a fixed capacity spectral--spatial path, ignoring that tracking difficulty varies substantially across frames and target states. Clear regions may require only lightweight local discrimination, whereas ambiguous boundaries and spectrally similar distractors often demand stronger contextual reasoning. To address this limitation, we propose SpecTrack, a spectral--spatial complexity-aware tracker that formulates MSI tracking as search-region-level adaptive capacity allocation. Its core component, the Spectral Adaptive Mixture-of-Experts (SAMoE) module, provides a capacity-ordered expert pool with progressively increasing latent rank, receptive field, and depth. Expert selection is guided by a Spectral Prompt Router, which fuses semantic context, spatial boundary cues, and a latent channel-variation cue computed after multispectral patch embedding to activate a sparse subset of SAMoE experts for each search region. In parallel, a Shared Global Expert supplies common latent spectral--spatial context to reduce fragmented sparse-routing decisions. Experiments on MUST, MSITrack, and HOTC20 demonstrate a favorable accuracy--efficiency trade-off. The accuracy-oriented SpecTrack-L384 achieves state-of-the-art or highly competitive AUCs of 65.2\%, 51.9\%, and 72.6\% on the three benchmarks, while the balanced SpecTrack-B224 reaches 62.4\% AUC at 43.7 FPS on MUST. An additional GOT-10k evaluation indicates RGB-domain architectural generalization, with SpecTrack-L384 achieving 79.3\% AO.
Deep learning algorithms are notorious for their high carbon footprint and computational demands that limit their deployment on edge devices and raise concerns about their long-term sustainability. Neuromorphic computing and Spiking Neural Networks (SNNs) offer a promising alternative to traditional Von Neumann architectures, providing energy-efficient performance, massively parallel computation, and on-chip learning capabilities. Autonomous machines represent a critical application domain where these advantages are particularly valuable. We present the first comprehensive evaluation of SNNs for real-world automotive multi-object detection and tracking. Using transfer learning with the SpikeYOLO architecture, we achieve mean Average Precision of 0.937 on the KITTI dataset and 0.771 on BDD100K MOT2020 dataset for object detection and a Higher Order Tracking Accuracy score of 0.701 (KITTI) and 0.445 (BDD100K MOT2020) for object tracking--results competitive with conventional deep learning methods. Our results demonstrate that SNNs can deliver high-performance object detection and tracking in an energy efficient manner, establishing their viability for perception in real-world autonomous systems.
Amir Pouladi, Vesal Ahsani, Haijun Li +2cs.CV cs.LG eess.IV
Fog severely degrades the visibility of small unmanned aerial vehicles (UAVs) in skydominant, long-range imagery, reducing the reliability of downstream detection and tracking. This paper presents a task-driven evaluation framework that links depth-aware synthetic fog generation, image restoration, object detection, and tracking within a unified pipeline. Given the practical difficulty of collecting and annotating foggy UAV scenes, synthetic fog is generated from real clear-weather outdoor images containing UAV targets using monocular depth estimation and the atmospheric scattering model. Representative restoration methods from classical, convolutional neural network (CNN)-based, and transformer-based families are first compared, after which the selected restoration model is integrated into the downstream perception pipeline. Detection is evaluated under both clean-only and fog-inclusive training regimes using multiple detector variants, while tracking-by-detection is assessed on clean, foggy, and restored video sequences. Beyond image-level restoration metrics, the study evaluates how fog and restoration affect detection robustness and tracking performance. The results show that fog substantially degrades both detection and tracking, primarily through increased missed detections. Fog-inclusive training provides the most consistent improvement in robustness, whereas test-time restoration is most beneficial when the detector has been trained only on clean imagery. These findings show that restoration quality does not necessarily translate into proportional gains in downstream perception and therefore should be evaluated jointly with detection and tracking performance.
Autonomous drones are rapidly transforming modern warfare and civil applications alike. This paper presents the development of an integrated intelligent drone system designed to serve as a personal assistant. Leveraging the DJI Tello drone platform, we implemented a modular architecture that integrates three core artificial intelligence functionalities: facial detection, facial recognition, and depth estimation from monocular vision. A web-based interface enables seamless drone control and real-time video monitoring, while a Python-based server processes visual data and executes inference pipelines using lightweight neural models optimized for embedded systems. Unlike existing commercial solutions, this system emphasizes accessibility, low-cost hardware, and open-source technologies. The system demonstrates robust performance in real-world conditions, including person tracking, indoor scanning, and autonomous line following using virtual sensors. This project validates the applicability of advanced AI techniques in real-time robotic systems and illustrates the feasibility of deploying them on constrained hardware, providing a foundation for future research in autonomous UAVs for military, rescue, and surveillance missions.
This paper presents OCD SLAM, a dynamic stereo visual SLAM framework that extends ORB-SLAM2 by jointly addressing dynamic objects and dynamic features in the scene. Usual visual SLAM systems operating in dynamic environments often fail in the presence of moving objects, due to the static-world assumption used in pose estimation and mapping. To address this predicament, we introduce a novel geometric approach based on the discrepancy between disparity and a newly proposed notion called ``cross disparity'', which exploits both temporal and stereo inconsistency to identify dynamic feature points. Complementary to this feature-level motion analysis, OCD SLAM integrates a 3D object detection module (SMOKE) with Kalman filter-based object tracking to perform object-level motion classification, enabling robust separation of static and dynamic scene elements for accurate pose estimation. The proposed approach has been evaluated on various sequences from the KITTI Odometry and KITTI Raw datasets. Results demonstrate that OCD SLAM achieves significant improvement in trajectory accuracy compared to ORB-SLAM2 and several state-of-the-art dynamic SLAM methods. Ablation studies further demonstrate the effectiveness of the cross disparity module in the KITTI Raw dataset and show that this method is able to detect dynamic features that are missed by the 3D object detection scheme alone.
At the heart of human visual perception lies the ability to maintain a continuous and coherent understanding of the external world. By integrating observations with accumulated experience, the human visual system can continuously adapt to variations in both the target and its surrounding environment, while preserving robust visual continuity as scene dynamics evolve. Human vision can therefore integrate prior knowledge, spatial geometry, and semantic context to understand complex scenes and their changes. As a core problem in computer vision, visual object tracking aims to bring machine perception closer to human visual perception. These capabilities are central to the task of Generic Object Tracking (GOT). In this task, a visual tracker is initialized only with the bounding box of an arbitrarily specified target in the first frame, and must continuously localize the target in subsequent dynamic visual streams. However, future events, observations, and real-world variations are inherently unpredictable; therefore, the model's generalization and online adaptation capabilities remain bottlenecks. Tracking reliability can deteriorate when the target undergoes severe deformation, is affected by complex distractors, encounters significant environmental changes, or belongs to a category unseen during training. This dissertation aims to narrow the gap between machine visual tracking systems and human visual perception by proposing a series of methods that systematically enhance the target discrimination, robust adaptation, and geometric reasoning capabilities of tracking models.
Spin plays a crucial role in many ball sports due to its effect on the trajectory of the ball. Vision-based estimation of the ball's spin during a game with conventional cameras is challenging due to the ball's small size, high speed, and fast rotation. To address these challenges, we propose an event-based active vision system that can track unmodified balls and measure their spin in real-time. The system consists of an event camera for its high temporal resolution and minimal motion blur, high-speed pan/tilt galvanometer mirrors to keep the ball in the field of view, and a low-latency focus-tunable telephoto lens to increase the spatial resolution on the ball and keep it in focus. To track the ball, we use a hybrid approach that combines 2D event-based detection for centering and 3D positions from a ball localization system for re-initialization. For high-accuracy spin estimation, we propose an offline method that performs contrast maximization on the sphere (s-CMax). This method achieves state-of-the-art accuracy on static balls across multiple sports (table tennis, baseball, tennis, and golf), with mean magnitude and axis errors of 2.1% and 4.0 degrees, respectively. We then develop a low-latency online method for table tennis as a case study in real-time applications. This method uses an uncertainty-aware convolutional neural network trained on pseudo-ground-truth spin labels from the offline approach, combined with a GPU-accelerated batch implementation of contrast maximization for refinement. We demonstrate reliable tracking and spin estimation with a three-view setup during professional table tennis matches, with high accuracy (8.8% magnitude and 6.4 degrees axis mismatch), 3 ms latency, and 750 Hz throughput.
Xiao Wang, Xufeng Lou, Zikang Yan +5cs.CV cs.AI cs.LG
RGB-Event tracking improves localization robustness by fusing RGB appearance textures and dense temporal motion cues from event sensors. While this multi-modal scheme broadens tracking applicability, real-world scenes suffer diverse structured signal degradations that hinder traditional multi-modal fusion. In harsh environments, either modality can lose reliability drastically, and targets frequently appear incomplete due to occlusion, edge truncation and foreground clutter.To tackle the above challenges, we present a hierarchical perturbation and retrieval framework tailored for RGB-Event tracking with robustness against partial target missing and modal degradation, termed APRTrack. To mimic real-world signal corruption, APRTrack constructs structured degradation via two adversarial perturbation branches at the modality and spatial levels, which separately simulate full-modal failure and localized target region absence. A hierarchical routing mechanism is designed to disentangle the training pipelines of the two perturbation types, effectively eliminating feature collapse induced by superimposed degradation constraints. Furthermore, we devise Footprint-guided Channel-calibrated Hopfield Retrieval (FCHR) for reliable historical information compensation. This module evaluates retrieval confidence based on association footprints between queries and memory banks, and calibrates the retrieval metric space prior to Hopfield matching, realizing controllable historical feature compensation bounded to target regions. Extensive experiments on FE108, COESOT, VisEvent, and FELT datasets demonstrate the effectiveness of our proposed strategies for the RGB-Event visual object tracking. The source code and pre-trained models will be released on https://github.com/Event-AHU/OpenEvTracking
Hyperspectral imagery encodes rich material properties that can improve tracking robustness under appearance ambiguity, illumination change, and background clutter. However, due to the limited availability of hyperspectral video data, many existing methods adapt pretrained RGB trackers via spatial or channel fusion strategies, largely neglecting the intrinsic material information in hyperspectral imagery. Moreover, the few material-aware approaches typically rely on external spectral unmixing pipelines that are decoupled from the tracking objective, limiting effective optimization of material representations for target localization. To address these limitations, we formulate hyperspectral object tracking as a joint optimization problem of material decomposition and target localization, coupling the two tasks via a weighted target-oriented unmixing loss that explicitly aligns material representations with localization accuracy. Specifically, we propose a material representation decomposition module for deep learning-based spectral unmixing with adaptive frequency decomposition. Building on the decomposed material representations, we further introduce a dual-branch wavelet-enhanced material prompt module that learns low- and high-frequency material prompts through efficient spatial-material interactions in the frequency domain. The framework is model-agnostic and can be seamlessly generalized to different unmixing backbones. Extensive experiments on standard hyperspectral tracking benchmarks demonstrate state-of-the-art performance and validate the effectiveness of the proposed end-to-end material-aware tracking framework. Code is available at https://github.com/han030927/E2EMPT.