General embodied agents should perceive, predict, act, evaluate, and improve within a unified system. World models have shown great promise in building such agents, yet existing models typically append an action output head to a world simulator, without coupling them into a closed decision-and-learning loop for policy improvement. We present Motus2, a self-evolving general world model for dexterous manipulation. Motus2 advances world modeling through model scaling and data scaling. For model scaling, a single model with shared weights exposes three control interfaces: a policy (world-action model), a simulator (action-conditioned world model), and an evaluator (value model). The policy proposes candidate action chunks, the simulator predicts their visual consequences, and the evaluator assesses the predicted outcomes. Their coupling forms a closed decision-and-learning loop for policy improvement. This formulation uses curated expert demonstrations for action learning, while failed and suboptimal interactions provide valuable evidence for dynamics modeling and value learning. For data scaling, Motus2 progresses from large-scale monocular egocentric data to synchronized stereo egocentric data, followed by robot-domain adaptation with robot trajectories and supplementary human-robot alignment data. Motus2 further studies global-autoregressive and hybrid-memory extensions of its sliding-window context, adds tactile feedback for contact-aware control, and is instantiated on a fully biomimetic platform with stereo vision, dual arms, dual dexterous hands, and tactile sensing. Together, egocentric data scaling and closed-loop general world model scaling provide a general path toward self-evolving dexterous manipulation.
We present $\mathcal{N}_0$-Foundation, a paradigm for tactile-enabled embodied manipulation, which integrates tactile sensing hardware, large-scale multimodal data, tactile representation learning, and standardized evaluation. First, we engineer the infrastructure for scalable data collection, including a vision-based tactile sensor, a tactile Universal Manipulation Interface (UMI), and a synchronized visuo-tactile data collection system supporting both robot embodiments and UMI-based demonstrations. Leveraging this infrastructure, we construct NeoData, which contains more than 30000 hours of synchronized visual and tactile demonstrations, spanning six embodiments, 450 tasks, and billions of paired RGB and tactile frames collected through a mixture of real-robot teleoperation and UMI-based demonstrations. To facilitate open research, we further release OpenNeoData, a 5000-hour open-source subset of NeoData. The dataset addresses a central limitation of existing manipulation corpora, critical for deformable-object manipulation, precise assembly, delicate force control, and sustained surface interaction. Capitalizing on the large-scale, heterogeneous tactile measurements, we propose NeoForce, a visuo-tactile representation model that learn transferable tactile representations across different sensor designs. To enable systematic evaluation of tactile embodied models built upon our infrastructure, datasets and tactile representations, we further propose a comprehensive benchmark, which combines the real-world NeoReal suite and the simulated NeoSim suite for standardized evaluation. Experiments across both suites show that policies benefit from the physical contact state rather than from the device-specific appearance of the tactile signal. We release the dataset, the representation, and the benchmark, aiming at supporting future work on tactile-enabled embodied manipulation.
Jianquan Wang, Haiwei Dong, Abdulmotaleb El Saddikcs.RO cs.CV cs.MM
Despite the success of foundation models in language and vision, their expansion into embodied AI is bottlenecked by a lack of generalized touch sensing. This limitation is especially relevant to consumer electronics, where smartphones, wearables, VR controllers, home robots, and health monitoring devices require safe and adaptive physical interaction. Constrained by hardware heterogeneity and the necessity of active physical data collection, current haptic models remain rigidly task-specific. To overcome these limitations, this article explores the transformative potential and developmental trajectory of Haptic Foundation Models (HFMs). We detail the paradigm shift required to transition from passive Large Language Models and Vision Language Models into active HFMs across four core dimensions: action coupling, physical dynamical representation space, continuous time-series data granularity, and action-conditioned future state prediction. Furthermore, we synthesize existing large-scale tactile datasets and benchmark UniTouch, AnyTouch, T3, and Sparsh on TacBench for force estimation, slip detection, and relative pose estimation.
State-of-the-art 3D reconstruction models, whether from visual, range, or both, tend to underperform on thin objects. This is partially due to the small amount of space such objects occupy in RGB images and in 3D point clouds. To test the extent of their errors, we collected the first thin object dataset comprising of synchronized RGB images, depth maps, and tactile response maps, where each frame is associated with inertial measurements, camera pose and calibration, and groundtruth depth and segmentation maps obtained from laser scanning of thin objects. We hypothesize that tactile data can aid in the reconstruction of thin objects as their response maps provide local shape and deformation information. Our dataset, termed VisTa3D, comprises of 387 scenes covering 70 thin objects over 17 environments. We benchmarked current 3D reconstruction models on VisTa3D and found that, indeed, they exhibit low fidelity on thin objects. To test if tactile data can help, we introduce the first visual-range-tactile 3D reconstruction model as a baseline. Code and data: https://huggingface.co/datasets/shaniaguo/VisTa3D.
Despite the rapid industrialization of the touch sensor manufacturing process, most of these sensors are still handmade in research laboratories. This complicates standardizing their performance, requiring the repetition of data collection and training models for each unit produced. To address this problem, this paper presents a method that can generalize the estimation of 3D force maps across different GelSight Mini sensor units, regardless of the sensor version. Specifically, the method consists of two stages: a domain adaptation stage, in which the input tactile image is reconstructed as a general tactile image using a UniT-based model; and a stage for estimating 3D force maps employing a U-Net network. Our proposal achieves promising results in both steps, such as an SSIM of 0.9338 +- 0.0358 in the image reconstruction phase and an MAE_F of 1.1294 +- 1.5934(N) in the force estimation phase.
Resistive pressure arrays are the cheapest and most widely shipped tactile sensors, yet tactile representation learning has concentrated on optical sensors that image a deforming gel. We present Tactus, an open model that answers text queries from pressure data alone: on the STAG benchmark (27 objects, held-out recordings), it reaches 0.771 +/- 0.062 top-1 over four runs (top-3 0.935), matching, and at best exceeding, the dataset's supervised closed-set CNN at 0.76, with no trained classifier head. The recipe is small-data: 187 training recordings, masked-autoencoder pretraining on 144k unlabeled same-sensor frames, and the sensor's own calibration affine, which recovered more accuracy than every architecture change combined. The released model's errors concentrate in a few contact-ambiguous classes, are uncorrelated with text-target geometry (Spearman rho <= 0.05 over 702 class pairs), and survive paraphrased and even bare-name queries within one point; two diverse frames recover 89% of eight-frame accuracy. Failures are reported with equal precision: cross-sensor pretraining pooling gave no gain, vision co-training degraded touch, and a mis-normalized input pipeline silently discarded 97% of the sensor's dynamic range while producing plausible intermediate results. Weights, code, and the memory layer the model plugs into are released openly.
Shilin Shan, Chuhao Zhou, Ruize Wang +30cs.RO cs.CV
Physically grounded robot intelligence requires robots to perceive, reason about, and regulate their interactions with the physical world. This capability is particularly critical in contact-sensitive manipulation, where successful task execution depends not only on visual perception and motion generation, but also on force regulation and adaptive control. In this context, recent robot learning methods have made substantial progress by integrating force, tactile, vision, language, and proprioceptive sensing into learned manipulation policies. In parallel, many systems adopt multi-phase architectures that combine high-level policies, action-refinement modules, and low-level controllers to bridge semantic task understanding with reactive physical execution. Despite these advances, existing surveys have not explicitly reviewed force- and tactile-aware robot learning from a unified perspective that jointly captures multimodal sensing and multi-phase system design. This survey addresses this gap by proposing TF-ART, a Tactile/Force-Aware Robot learning Taxonomy for multimodal and multi-phase frameworks, which maps individual methods into a unified hierarchical structure. The framework characterizes how recent works organize observation modalities, encode and fuse heterogeneous sensory inputs, generate and refine actions across multiple phases, and connect learned policies to reactive robot-end control. Building on this methodological view, we further examine the task settings and infrastructure requirements of physical interaction, thereby integrating both algorithmic and practical perspectives on force- and tactile-aware robot learning.
Vision and touch are complementary modalities essential for robotic perception and manipulation. While vision provides global object context, touch offers precise local information at contact points. Integrating these modalities for contact localization, i.e., predicting the location of touch on an object's surface, poses significant challenges due to the need for accurate spatial alignment between tactile data and visual geometry. To address this challenge, we propose VTLoc, a novel visual-tactile framework that localizes contact points from tactile readings using a 3D point cloud as visual input. VTLoc introduces two key components: a geometric multi-modal alignment module, which reconstructs a pseudo-point cloud from fused visual-tactile features and aligns it with the visual point cloud to enforce spatial consistencies across modalities; and an iterative localizing updater, which iteratively refines the predicted contact location using fused visual-tactile features. Evaluated on a new benchmark of 100 real-world objects, VTLoc improves single-touch contact localization by reducing local-to-global correspondence ambiguity.
Tactile image generation significantly reduces the dependency on expensive and wear-prone sensors by synthesizing high-fidelity tactile data, offering an efficient solution for tactile information acquisition in robotic perception and human-machine interaction systems. However, existing methods depend on large-scale, diverse datasets from specific sensors and lack efficient data utilization and robust generalization capabilities, struggling in vision-limited environments. To address this, we introduce VQ-Touch, a tactile generation framework that supports both cross-sensor and multi-scenario applications. Specifically, to efficiently extract complex deformation and texture features from the data, we propose DM-VQGAN, an effective tactile representation learner. Furthermore, we introduce a discrete diffusion decoder with a unified conditioning interface, supporting multimodal generation tasks such as images and labels, and enhances the model's generalization capability through few-shot mixed training, thus achieving compatibility with current mainstream sensors and their variants. Experiments show that VQ-Touch surpasses state-of-the-art methods in multiple tasks.
Estimating the full shape of a deformable object is especially challenging when vision is unavailable: in the dark, inside an opaque bag, behind the manipulating hand, or under heavy self-occlusion. Touch is the natural sensor in these settings, but touches are sparse and local. We present a single topology-agnostic estimator that reconstructs the full mesh of a deformable object from only a few touches and no vision, using one permutation-invariant cross-attention architecture that handles a 1D rope, a 2D cloth, and a 3D volumetric soft body. The learned estimator reduces reconstruction error by roughly two-thirds relative to non-learned geometric mesh completion and a Gaussian-process surface baseline, and it outperforms a simpler global-pool set encoder, with the gap growing as more touches are observed. We then show that the estimator's deep-ensemble uncertainty can be used to learn where to touch next, which lowers error further and beats both random touching and a Gaussian-process active baseline at sparse budgets. This gain is modest on average but grows with self-occlusion and on the error tail. When vision is also available, where to touch barely matters, motivating the vision-free setting we study.
Whole-arm manipulation involves direct contact with the environment while the robot completes a task by distributing contact across multiple links as contacts form, slide, and break. This setting breaks common implicit assumptions in many learning-based manipulation pipelines: arm configuration tightly couples motion and contact forces, contact state is partially observed under occlusion, and purely learned rollouts can become physically inconsistent under distribution shift because many multi-link contact configurations are sparsely represented in the data. To address this, we propose TACTIC (Tactile and Vision Conditioned Contact-Centric Control), a receding-horizon controller for whole-arm manipulation. TACTIC uses a contact-centric hybrid predictive model that combines RGB-D, distributed tactile sensing, and a compact 2D proximity representation. The model couples a learned, action-conditioned latent dynamics model with analytical kinematics through contact Jacobians, enabling rollouts of future contact configurations and interaction forces. TACTIC integrates these rollouts into a sampling-based MPC planner with contact-aware action sampling: contact Jacobian-based projections steer sampled action sequences toward force-modulating directions, and objectives defined over predicted proximity and interaction forces trade task progress against whole-arm force regulation. We evaluate TACTIC in simulation against state-of-the-art model-based and model-free methods, and perform ablations that isolate the contribution of each design choice. TACTIC consistently outperforms other methods. We further demonstrate real-world performance on a robot with distributed tactile sensing across three whole-arm manipulation tasks that require multi-contact trajectories: turning over and repositioning a manikin, and goal-reaching in a 3D dynamic maze. Website: https://emprise.cs.cornell.edu/tactic
Among the five primary human senses, tactile is arguably the most fundamental to survival, as it enables the perception of physical contact and interaction in real-world environments. In this paper, we explore two key challenges of integrating tactile sensing into intelligent systems for multimodal reasoning: (i) insufficient modeling of dynamic tactile signals, which restricts reasoning over temporally evolving properties, and (ii) hallucination in tactile foundation models caused by the absence of explicit reasoning mechanisms, leading to unstable real-world inference. To address these challenges, we propose TacReasoner, a dynamic tactile-language framework for interactive reasoning in real-world scenarios. First, TacReasoner incorporates a Dynamic-aware Tactile Encoder to enhance the perception and representation of dynamic tactile signals. More importantly, we introduce TouchCoT-10k, the first tactile chain-of-thought dataset for structured reasoning over tactile inputs. Upon it, we establish DynTac-Bench to systematically evaluate dynamic tactile perception and real-world commonsense reasoning. Experimental results demonstrate that TacReasoner achieves competitive performance against state-of-the-art models across multiple datasets. Notably, despite using only 7B parameters, TacReasoner outperforms the 14B VTV-LLM model on most subtasks, highlighting its effectiveness and efficiency in tactile commonsense reasoning.
Visual policies learned from human videos, teleoperation, and robot demonstrations offer scalable motion priors, but often fail in contact-rich manipulation, where success significantly depends on local force and contact geometry. Tactile sensing provides these complementary signals, yet tactile data remain costly to collect and hard to generalize across sensors, robots, and tasks. We introduce OmniTacTune, a policy-agnostic real-world RL pipeline that adapts tactile feedback to pretrained visual policies through residual correction. OmniTacTune uses a two-stage design: it first bootstraps tactile-aware learning from autonomous base-policy rollouts, then learns a lightweight tactile residual policy through online interaction. Extensive experiments show that OmniTacTune generalizes across diverse contact-rich tasks, visual base policies, and tactile representations. Across four real-world contact-rich tasks, it improves visual base policies from 5-40% success to 85-100% within 40-80 minutes, demonstrating an efficient path for adapting tactile feedback to scalable visual robot policies. Project page: https://colinyu1.github.io/omnitactune-site/
As an essential modality for dexterous and contact-rich tasks, tactile sensing provides precise force feedback that cannot be reliably inferred from vision. However, limited by hardware and data collection systems, existing datasets with tactility remain small in scale and narrow in contact coverage. Meanwhile, Vision-Language-Action (VLA) models with tactile modality are constrained on dynamics-agnostic post-training, which limits the performance ceiling on downstream tasks. In this paper, we present H-Tac, a large-scale tactile-action dataset with 160-hour egocentric human videos containing more than 300 tasks and 135k episodes. Building upon this, we propose Transferable Tactile Pre-Training (TTP), a system of tactile-based pre-training on human data for fine-grained robotic tasks. To bridge the gap between humans and robots, we use unified tactile and action spaces throughout the pre-training and post-training phases, preserving prior knowledge during human-to-robot transfer. By leveraging a tactile expert for future tactile prediction, our framework explicitly models the contact dynamics and precise physical interactions. Extensive experiments in simulation and on real robots demonstrate that our model achieves superior performance, exhibiting robust generalization and fine-grained manipulation capabilities. TTP paves the way for scalable tactile pre-training via human-to-robot transfer.
Jingbo He, Michael Färber, Roberto Calandracs.RO cs.AI cs.CL cs.CV
For robots manipulating open-world objects, tactile representations must generalize to unseen materials. We introduce RCT (Robotic Contact Tactile), a robot-collected touch-vision-language dataset with 29,279 tactile frames from full robot presses on 122 industrial reference materials in 7 categories, recorded with three DIGIT sensors at multiple contact positions. RCT preserves each press as a contact sequence, enabling held-out evaluation across materials, categories, sensors, contact positions, and contact sequences. Frames from one press are strongly correlated: frame-random splits can place near-duplicate observations of the same physical interaction in both training and test. With the encoder held fixed, removing contact-sequence overlap reduces tactile-to-text Recall@1 by 17.7 percentage points. When materials are additionally held out at training time, performance drops sharply, leaving held-out-material Recall@1 at 25.1 +/- 6.1% averaged over three held-out draws. The public TVL/HCT split shows the same structure: every test contact sequence appears in training, and raw-pixel nearest neighbors recover the correct sequence in 98.3% of cases. Uniformly sampling a press improves contrastive training, and RCT-trained embeddings improve category probes on unseen materials. RCT makes contact-sequence-aware, held-out-material evaluation reproducible and exposes novel-material generalization as a central challenge for robotic tactile perception. The RCT dataset is open-sourced at https://faerber-lab.github.io/RCT/
Jiahang Tu, Fengyu Yang, Chenyang Ma +8cs.RO cs.AI
Unified multimodal models (UMMs) have shown great promise in integrating understanding and generation across diverse modalities. However, existing research rarely extends this paradigm to the tactile domain, where both object-level semantics and sensor-level configurations jointly determine the meaning of touch. To address this gap, we propose UniTac, the first UMM designed for tactile understanding and generation. UniTac models the tactile process as a transition from non-contact to contact, capturing the physical interaction between sensors and objects through a dual-level representation that encodes both sensor and object attributes. For tactile understanding, UniTac introduces two tasks, object property description and sensor identification, to enhance reasoning over physical and cross-sensor information. For tactile generation, we design a two-stage training paradigm consisting of reconstruction and alignment, together with a sensor-prior-based sampling strategy that simulates realistic tactile contact. Trained on large-scale multi-sensor datasets, UniTac achieves state-of-the-art performance in tactile understanding and generates realistic tactile signals across sensors.
Visuo-Tactile policies leveraging optical tactile sensors have shown great promise in contact-rich manipulation. These sensors achieve high spatial resolution and multi-dimensional force sensing by utilizing an internal camera to monitor the deformation of their elastic gel surface, thereby indirectly inferring tactile cues. Despite their advantages, extracting fine-grained contact states necessary for contact-rich manipulation remains an open challenge. Existing methods typically use either raw images or cumulative motion fields to represent tactile cues. However, both are prone to perception ambiguity. Raw tactile images mainly capture appearance changes, while cumulative motion fields only reflect the aggregate gel deformation. Consequently, distinct fine-grained contact states can exhibit highly similar patterns, making it difficult to explicitly distinguish subtle contact variations. To address this issue, we explore the dynamic priors of tactile motion and discover that the correlation between transient and cumulative motion can explicitly distinguish fine-grained contact states. Based on this insight, we propose a motion-aware tactile representation to facilitate contact-rich manipulation. Beyond tactile representation, effective fusion of tactile and visual modalities is also critical. Most existing fusion methods either directly concatenate features from each modality or train modality-specific networks separately and fuse their outputs. However, these strategies struggle to simultaneously model cross-modal interactions and preserve modality-specific characteristics. In this work, we take advantage of the Mixture-of-Transformers architecture and propose a unified modality-aware visuo-tactile policy that captures cross-modal complementarity while maintaining modality-specific properties.
Dexter R. Shepherd, Nicolas Herzig, Phil Husbands +3cs.RO cs.LG
Existing texture datasets for tactile sensing primarily consist of sensor readings from a specific sensor interacting with available surfaces/objects rather than describing the textures themselves, limiting fair comparison between tactile sensors and hindering reproducible research. In this work, we introduce a 3D-printable dataset of mathematically defined textures designed to be fabricated reliably across different printers and filament types. The dataset consists of six parametrically generated surface patterns derived from combinations of sine-wave and Fourier-based functions, giving controlled variation in spatial frequency, amplitude, and directional structure. We evaluate the reproducibility of these textures across three popular 3D printers and multiple filament types by measuring variance in images captured using an optical TacTip sensor under controlled contact conditions. Our results show that print quality, particularly peak sharpness and stringing, affects tactile variance, with higher-end printers producing significantly more consistent signatures. Classification experiments using neural networks and PCA-based models further demonstrate that high-quality prints support strong within-printer generalisation, while cross-printer generalisation remains challenging due to geometric inconsistencies. This work establishes the first openly available, physically reproducible 3D-printed texture benchmark, providing a foundation for fair comparison of tactile sensors.
Shivani Kamtikar, Chung Hee Kim, Camilla Tabasso +3cs.RO cs.AI
Humans effortlessly locate and identify objects by touch alone, even without vision. In contrast, robotic systems rely heavily on vision and struggle with autonomous tactile exploration and object identification. We present TACTFUL, a vision-free tactile exploration framework that enables a multi-fingered robot to autonomously explore confined workspaces, discover objects through contact, and identify them via tactile reconstruction. Trained entirely on real hardware without simulation, our system learns a single policy that balances global workspace exploration with local surface refinement through a dynamic reward schedule. Our results demonstrate that tactile sensing, when paired with structured learning, can serve as an effective primary modality for object-level reasoning, achieving 77% success with 0.015 m average reconstruction error and outperforming baseline approaches on real-world objects.
This paper presents a contact-based 3-D surface measurement method based on a Digital Fringe Projection (DFP) system, belonging to the vision-based tactile sensing family pioneered by the commercially successful GelSight sensor. Such sensors have proven effective for robotic fingertip manipulation and contact sensing. However, because GelSight employs photometric stereo with RGB LEDs, it does not measure absolute depth directly but instead infers it by integrating estimated surface gradients, which can accumulate reconstruction errors; in addition, it becomes increasingly difficult to calibrate as the sensing area grows, and its depth accuracy is challenged on highly reflective or transparent objects. To overcome these drawbacks, we propose a fringe-projection-based contact measurement technique that performs triangulation-based 3-D reconstruction on a coated silicone contact surface, providing dense per-pixel surface geometry and full-field 3-D shape measurement over the contact region. By integrating high-accuracy digital fringe projection into the sensor, our approach simplifies calibration over larger areas and enhances depth precision for complex surfaces. Experimental results, including a direct comparison with a GelSight Mini sensor, a sphere-fitting accuracy evaluation, and an uncertainty analysis, confirm that the proposed method significantly improves the accuracy and stability of structured-light-based 3-D measurements, allowing reliable reconstruction of objects with diverse optical properties.
Blind grasping with a dexterous hand is a crucial manipulation capability. Nevertheless, learning such tactile-only policies for real robots remains challenging due to the tactile sim-to-real gap and the limited expressiveness of sparse tactile signals. To bridge this gap, we propose a framework for tactile-only blind grasping that is deployable on a physical multi-fingered robotic hand. Our approach combines three key components. First, we introduce a Real2Sim tactile calibration pipeline that constructs a contact-calibrated digital-twin simulator capable of reproducing real tactile signals. Second, we improve the expressiveness of sparse tactile observations using a layout-aware tactile encoder, which incorporates sensor-geometry priors through self-supervised pretraining. Third, to improve generalization to unseen objects, we train object-specific reinforcement-learning experts in the calibrated simulator and aggregate their successful grasp trajectories into a tactile-conditioned Diffusion Policy. We evaluate our method on a physical LEAP Hand equipped with distributed tactile sensing across 10 seen and 10 unseen objects. The deployed policy achieves a 27\% real-world grasp success rate across all 20 objects, without real-world grasping demonstrations or visual input. Simulation ablations show that layout-aware tactile pretraining improves grasping performance, while sensing-level evaluations confirm that Real2Sim calibration increases the consistency of tactile contact events between simulation and hardware. Together, these results suggest that contact-event calibration, geometry-aware tactile representation learning, and diffusion-based policy aggregation provide an effective path toward tactile-only blind grasping on real dexterous robotic hands. Project page:Dex-Blind-Grasp.github.io.
Touch is a key modality for embodied agents to understand the physical world. Although recent work has incorporated tactile signals into language systems for tactile commonsense reasoning, scaling such systems to realistic open-world settings remains challenging due to two key bottlenecks: (1) current tactile reasoning datasets remain limited in format and scale, providing insufficient supervision for reasoning from tactile observations to physical commonsense and hindering the learning of transferable tactile commonsense; (2) Tactile signals are inherently redundant and action-specific, yet existing methods often overlook these properties, resulting in inefficient representations with limited semantic expressiveness. To address these limitations, we propose TouchThinker, a tactile-language framework that scales tactile commonsense reasoning to the open world from both data and representation perspectives. First, we construct TouchThinker-1M, a million-scale, multi-source tactile reasoning dataset covering \textbf{415} objects, \textbf{8} scenarios, and \textbf{7} sensor types, providing a solid data foundation for open-world generalization. We further introduce TouchThinker-Bench, an open-world benchmark with more realistic and diverse tasks. Then, we propose action-aware modeling mechanism to improve tactile representation efficiency and enable efficient reasoning. Experimental results demonstrate that TouchThinker achieves competitive performance against state-of-the-art models across multiple datasets. Our code and dataset will be made available at: https://github.com/lvkailin0118/TouchThinker.
Agis Politis, René Zurbrügg, Valentina Cavinatocs.RO cs.CV cs.LG
Humans rely on spatially dense, geometry and force-aware tactile feedback at high temporal resolution for dexterous manipulation. While vision-based tactile sensors enable dense force estimation, they are limited by camera frame rates, motion blur, and data bandwidth. Event-based optical tactile sensors offer an attractive alternative with microsecond temporal resolution and low motion blur, but existing methods are restricted to predicting only net forces. We introduce the first framework for dense 3D force field reconstruction using event-based optical tactile sensors. Our approach estimates 3D surface displacements from event data and maps them to forces via the inverse Finite Elements Method (iFEM). Shear displacements are recovered through the proposed event-based marker tracking algorithm, while normal displacements are predicted by a convolutional neural network trained on a collected dataset of synchronized force-displacement-event data. Experiments demonstrate accurate reconstruction of physically grounded forces, achieving a mean absolute error of (0.14 N, 0.10 N, 0.93 N) over force ranges up to (4 N, 4 N, 20 N), while operating at an average of 100 Hz. This work constitutes a first step toward enabling dense force feedback for high-frequency control in robotic grasping and dexterous manipulation.
Estimating full-hand grasp pressure from egocentric video is critical for immersive VR and robotic manipulation, yet dense tactile sensing often relies on intrusive hardware. Existing vision-based methods predominantly rely on planar surfaces or fingertip contacts, failing to generalize to complex 3D object interactions. Therefore, we introduce EgoTactile, a benchmark pairing egocentric video with full-hand pressure supervision for diverse everyday objects, incorporating a bare-hand transfer subset to enable generalization to natural scenarios. Leveraging this benchmark, we first establish EgoPressureFormer as a discriminative baseline. Beyond this, to explicitly address the uncertainty in partial observations, we propose EgoPressureDiff, a conditional diffusion framework that adapts a large-scale pre-trained video diffusion backbone. By combining rich world knowledge priors with a Physically-Informed Feature Rectification layer to inject semantic constraints, our approach effectively infers plausible contact patterns and resolves visual-physical ambiguities. Extensive experiments demonstrate that our method achieves superior performance on the benchmark and robust transferability to in-the-wild scenarios. Our project page is available at https://egotactile.github.io/.
Effective visuo-tactile integration is critical for robotic dexterous manipulation, especially when visual observations are unreliable or occluded. However, robustly aligning sparse, heterogeneous tactile measurements with dense visual representations remains a fundamental challenge. Most existing approaches require policies to learn cross-modal correspondences implicitly from limited demonstrations, without leveraging geometric priors. As a result, they are often data-inefficient and generalize poorly when visual observations are degraded. To address this limitation, we propose a framework that explicitly grounds physical contacts in the image domain. Using robot forward kinematics and camera calibration, we project tactile sensor locations directly onto the RGB image plane. We then render force-modulated Gaussian saliency maps to model spatial uncertainty arising from kinematic and calibration errors. By integrating these 2D spatial anchors through a zero-initialized conditioning architecture, our method injects physical contact priors into standard visual backbones while preserving pre-trained visual representations. We evaluate our method on six dexterous manipulation tasks in both simulation and the real world under severe visual occlusions. Real-world experiments show that explicit RGB-S grounding in the image domain improves real-world occluded manipulation success rates by $26.7$ percentage points over the strongest implicit visuo-tactile baseline, suggesting its improved spatial reasoning and robustness to occlusion. Project page: touch-as-saliency.github.io
Elle Miller, Jayaram Reddy, Ayush Deshmukh +4cs.RO cs.LG
Tactile-based reinforcement learning (RL) is currently hindered by fragmented research and a focus on over-saturated orientation tasks. We introduce v2 of the Robot Tactile Olympiad (\texttt{roto 2.0}), a GPU-parallelised benchmark designed to standardise tactile-based RL across four distinct robotic morphologies (16-DOF to 24-DOF). Unlike prior benchmarks, roto focuses on end-to-end "blind" manipulation, utilising only proprioception and tactile sensing without state information or distillation. We demonstrate a significant performance leap, with our blind agents achieving 13 Baoding ball rotations in 10 seconds, an order of magnitude faster than current state-of-the-art speeds. By open-sourcing our environments and robustly tuned baselines, we reduce the barrier to entry and enable researchers to prioritise fundamental algorithmic challenges over tedious RL tuning. Website: https://elle-miller.github.io/roto/
We present FlexiTac, a low-cost, open-source, and scalable piezoresistive tactile sensing solution designed for robotic end-effectors. FlexiTac is a practical "plug-in" module consisting of (i) thin, flexible tactile sensor pads that provide dense tactile signals and (ii) a compact multi-channel readout board that streams synchronized measurements for real-time control and large-scale data collection. FlexiTac pads adopt a sealed three-layer laminate stack (FPC-Velostat-FPC) with electrode patterns directly integrated into flexible printed circuits, substantially improving fabrication throughput and repeatability while maintaining mechanical compliance for deployment on both rigid and soft grippers. The readout electronics use widely available, low-cost components and stream tactile signals to a host computer at 100 Hz via serial communication. Across multiple configurations, including fingertip pads and larger tactile mats, FlexiTac can be mounted on diverse platforms without major mechanical redesign. We further show that FlexiTac supports modern tactile learning pipelines, including 3D visuo-tactile fusion for contact-aware decision making, cross-embodiment skill transfer, and real-to-sim-to-real fine-tuning with GPU-parallel tactile simulation. Our project page is available at https://flexitac.github.io/.
Yang You, Won Kyung Do, Aiden Swann +3cs.RO cs.CV cs.GR
Simulating optical tactile sensors presents significant challenges due to their high deformability and intricate optical properties. To address these issues and enable a physically accurate simulation, we propose DOT-Sim: Differentiable Optical Tactile Simulation. Unlike prior simulators that rely on simplified models of deformable sensors, DOT-Sim accurately captures the physical behavior of soft sensors by modeling them as elastic materials using the Material Point Method (MPM). DOT-Sim enables rapid calibration of optical tactile sensor simulation using a small number of demonstrations within minutes, which is substantially faster than existing methods. Compared to current baselines, our approach supports much larger and non-linear deformations. To handle the optical aspect, we propose a novel approach to simulating optical responses by learning a residual image relative to the real-world idle state. We validate the physical and visual realism of our method through a series of zero-shot sim-to-real tasks. Our experiments show that DOT-Sim (1) accurately replicates the physical dynamics of a DenseTact optical tactile sensor in reality, (2) generates realistic optical outputs in contact-rich scenarios, (3) enables direct deployment of simulation-trained classifiers in the real world, achieving 85% classification accuracy on challenging objects and 90% accuracy in embedded tumor-type detection, and (4) allows precise trajectory following with a policy trained from demonstrations in simulation, with an average error of less than 0.9 mm.
Carson Kohlbrenner, Niraj Pudasaini, William Xie +3cs.RO cs.LG
Collision-free motion is often aided by tactile and proximity sensors distributed on the body of the robot due to their resistance to occlusion as opposed to external cameras. However, how to shape the sensor's properties, such as sensing coverage; type; and range, to enable avoidant behavior remains unclear. In this work, we present a reinforcement learning framework for whole-body collision avoidance on a humanoid H1-2 robot and use it to characterize how sensor properties shape learned avoidance behavior. Using dodgeball as a benchmark task, we ablate the properties of sensors distributed across the upper body of the robot and find that raw proximity measurements can substitute for explicit object localization provided the sensing range is sufficient and that sparse non-directional proximity signals outpace dense directional alternatives in sample efficiency.
Wadhah Zai El Amri, Nicolás Navarro-Guerrerocs.RO cs.AI cs.LG
Training machine learning models for robotic tactile sensing requires vast amounts of data, yet obtaining realistic interaction data remains a challenge due to physical complexity and variability. Simulating tactile sensors is thus a crucial step in accelerating progress. This paper presents SPLIT, a novel method for simulating image-based tactile sensors, with a primary focus on the DIGIT sensor. Central to our approach is a latent space arithmetic strategy that explicitly disentangles contact geometry from sensor-specific optical properties. Unlike methods that require recalibration for every new unit, this disentanglement allows SPLIT to adapt to diverse DIGIT backgrounds and even transfer data to distinct sensors like the GelSight R1.5 without full model retraining. Beyond this adaptability, our approach achieves faster inference speeds than existing alternatives. Furthermore, we provide a calibrated finite element method (FEM) soft-body mesh simulation with variable resolution, offering a tunable trade-off between speed and fidelity. Additionally, our algorithm supports bidirectional simulation, allowing for both the generation of realistic images from deformation meshes and the reconstruction of meshes from tactile images. This versatility makes SPLIT a valuable tool for accelerating progress in robotic tactile sensing research.