Visual SLAM is commonly evaluated on clean trajectories, although deployment failures are often caused by adverse weather, illumination, blur, and sensor artifacts. Controlled corruptions are attractive because they isolate such factors, but a synthetic stress test is useful only when it leads to the same engineering conclusion as the condition it is intended to approximate. This work examines that question for monocular SLAM. We evaluate a classical feature-based system and two learned trackers under image-space, geometry-aware, and compound corruptions, and compare their behavior with adverse conditions from 4Seasons. Rather than reducing robustness to a single trajectory error, the evaluation separates explicit tracking failure from drift accumulated by methods that remain active. The results show that learned trackers largely replace catastrophic loss with sustained, and sometimes severe, drift. More importantly, the apparent ordering of the learned systems changes with the physical fidelity of the corruption: structured rain and fog proxies preserve the real-world ordering, whereas a simple illumination proxy does not. Code is available at: https://github.com/abhaythomas/master_thesis_vslamlab_robustness.
Precise metric depth estimation is fundamental for autonomous robot navigation, yet monocular systems inherently suffer from scale ambiguity and scale drift. While recent recurrent flow-based SLAM systems have demonstrated state-of-the-art robustness, they remain scale-ambiguous. In this paper, we propose Metric-DROID, an end-to-end recurrent architecture that anchors visual SLAM to physical reality by integrating proprioceptive odometry. Our framework introduces the following innovations: (1) A LSTM Update Operator that encodes high-frequency odometry sequences into spatial feature maps, providing a persistent metric bias for iterative refinement. (2) An Uncertainty-Aware Metric Backend ($BA_{odom}$) that treats odometry as a geometric anchor with learned heteroscedastic covariance. By regressing a time-varying metric uncertainty $Σ_{o}$, our system intelligently balances visual re-projection and metric translation residuals, effectively mitigating the impact of wheel-slip and sensor noise. (3) We further propose a selective residual fine-tuning strategy to preserve pre-trained geometric priors while enabling zero-shot metric alignment.
Reliable visual data association is fundamental to visual SLAM (V-SLAM), as it directly determines the quality of the camera pose estimation and map consistency. However, the handcrafted descriptors used by most mature real-time systems degrade under illumination and viewpoint changes, while learning-based front-ends that address this weakness typically require replacing the extraction-and-matching pipeline and introduce substantial computational overhead. Descriptor enhancement offers a compromise by refining existing descriptors within their original format, yet current methods rely on simplified attention mechanisms whose limited contextual modeling constrains the achievable matching quality. To resolve this trade-off between contextual expressiveness and efficiency, we propose Desc++, a lightweight enhancement module that jointly encodes descriptor representations and keypoint geometry and aggregates spatial context through a hybrid architecture that combines order-agnostic global attention with geometry-aware sequential modeling in linear time. The enhanced descriptors retain their original dimensionality and matching interface, enabling integration into deployed V-SLAM systems without modifying the pipeline. Experiments across descriptor matching, correspondence analysis, and system-level benchmarks with four different V-SLAM systems demonstrate that Desc++ improves matching accuracy over the state-of-the-art enhancement method, translates these gains into more accurate and stable trajectory estimation, and achieves a favorable balance between accuracy and efficiency for practical integration into existing real-time V-SLAM pipelines.
Visual SLAM is a well-established technology utilized in a wide range of real-world applications. However, its performance still degrades under challenging visual conditions, such as low texture, severe motion blur, and poor illumination. Systems based on deep learning outperform classical geometry-based ones and achieve state-of-the-art results by combining learned 2D data association and uncertainty with differentiable geometric optimization in recurrent architectures. Still, it remains unclear exactly which components are fundamentally responsible for this success. In this paper, we ask: Is the superior performance of deep learning-based systems driven primarily by learned 2D data association, the combination of learned 2D data association and uncertainty, or the recurrent architecture itself? We investigate this question empirically by conducting a controlled study. Our findings reveal that the success of DL-based V-SLAM systems hinges on learned 2D data association and uncertainty rather than their recurrent architecture, underscoring the necessity of learning-based paradigms for the design of these components. Upon acceptance, the code will be released as open source.
This paper presents OCD SLAM, a dynamic stereo visual SLAM framework that extends ORB-SLAM2 by jointly addressing dynamic objects and dynamic features in the scene. Usual visual SLAM systems operating in dynamic environments often fail in the presence of moving objects, due to the static-world assumption used in pose estimation and mapping. To address this predicament, we introduce a novel geometric approach based on the discrepancy between disparity and a newly proposed notion called ``cross disparity'', which exploits both temporal and stereo inconsistency to identify dynamic feature points. Complementary to this feature-level motion analysis, OCD SLAM integrates a 3D object detection module (SMOKE) with Kalman filter-based object tracking to perform object-level motion classification, enabling robust separation of static and dynamic scene elements for accurate pose estimation. The proposed approach has been evaluated on various sequences from the KITTI Odometry and KITTI Raw datasets. Results demonstrate that OCD SLAM achieves significant improvement in trajectory accuracy compared to ORB-SLAM2 and several state-of-the-art dynamic SLAM methods. Ablation studies further demonstrate the effectiveness of the cross disparity module in the KITTI Raw dataset and show that this method is able to detect dynamic features that are missed by the 3D object detection scheme alone.
3D Gaussian Splatting (3DGS) has significantly boosted novel view synthesis and high-fidelity scene reconstruction, expanding the potential of 3DGS-based Visual Simultaneous Localization and Mapping (SLAM) methods. However, most existing systems fail to fully exploit the underlying structural information, which limits rendering quality and often leads to inconsistent maps. To address these limitations, we propose MMD-SLAM, a structure-enhanced Visual SLAM framework that leverages the Atlanta World (AW) assumption to guide a Multi-Meta Gaussian representation for photorealistic mapping. First, we introduce a point-line fusion strategy for pose optimization, where 3D line segments are incorporated to improve tracking robustness and provide additional constraints for mapping. Second, we design a Multi-Meta Gaussian representation with dominant directions, explicitly encoding structural priors from the AW hypothesis. Finally, we propose a Gaussian evolution strategy that adapts to scene geometry and incorporates structural cues into global optimization. Extensive experiments demonstrate that these innovations enable MMD-SLAM to achieve state-of-the-art performance in both tracking accuracy and mapping quality. e.g., our method achieves a 48.56% reduction in ATE RMSE on ScanNet and a 5.71% improvement in PSNR on Replica, compared with MonoGS.