Video world models increasingly serve as data engines, action planners, and simulators for embodied AI, but conventional embodied world model (EWM) benchmarks lack a unified 3D-grounded protocol for establishing whether generated rollouts preserve the underlying 3D scene state or translate into executable actions. We introduce RoboPhys-3D, a 3D-grounded EWM benchmark built on RoboTwin 2.0, covering 50 manipulation tasks across four regimes, with 5,000 episodes and 25,000 multi-view ground-truth videos. A defining feature of RoboPhys-3D is that generated and ground-truth videos are processed through the same 3D reconstruction pipeline, enabling reconstruction-induced error to be distinguished from generation-induced error. The RoboPhys-3D benchmark organizes 50 complementary metrics into 18 sub-dimensions across four levels: pixel-level fidelity, 3D geometry consistency, state-level understanding, and task-level completeness. We further introduce Average Full Score, a hierarchical score averaging all 50 metrics for comprehensive evaluation, and RoboPhyscore, a compact task-aligned score averaging the metrics most strongly correlated with task success. Among the four representative video world models, Cosmos 3 achieves the highest RoboPhyscore (0.6330, 92.7% of ground truth), while state- and execution-grounded metrics reveal substantial failures that perceptual and vision-language model-based judgments fail to capture. RoboPhyscore further exhibits strong agreement with human evaluation (Pearson r = 0.9761 and Spearman \r{ho} = 0.8962), demonstrating the importance of grounded, execution-aware evaluation for EWM capability.
Ayman Laaroussi, Peter Hanappe, David Colliauxcs.RO cs.AI
While most phenotyping platforms rely primarily on image-based measurements, advanced plant characterization requires the integration of active physiological sensing modali- ties such as chlorophyll fluorescence. We present an autonomous robotic platform designed to perform targeted fluorescence measurements on plant leaves. The system combines 3D plant reconstruction, geometric analysis, and motion planning to localize suitable measurement points and generate collision-free trajectories for a robotic manipulator. A dense 3D model of the plant is reconstructed from multi-view data and used to extract candidate leaf surfaces based on orientation, accessibility, and sensing constraints. These targets are then integrated into a task-level planning framework that guides the end-effector to precise contact or near-contact configurations required for point-based fluorescence acquisition. The platform enables automated, repeatable, and spatially resolved physiological measurements that go beyond passive imaging. By tightly coupling perception, geometric reasoning, and manipulation, the proposed system provides a robotics-driven approach to high-resolution plant phenotyping and opens new directions for autonomous agricultural inspection and plant-aware manipulation.
Jean-Daniel de Ambrogi, Aladine Chetouani, Vincent Nguyen +1cs.CV cs.RO
Recent advances in SLAM have leveraged 3DGS for photorealistic reconstruction and novel view synthesis. However, most methods rely on RGB-D input, which is unavailable on consumer-grade smartphones, and few integrate 3DGS within a collaborative framework. Therefore, we present CGS-SLAM, a hybrid decentralized/centralized system enabling multi-agent 3DGS SLAM using only RGB and inertial data. Each agent performs local tracking with inertial data as a motion prior and reconstructs a scaled map using a metric monocular depth estimator (Depth Pro). Keyframe encodings are shared among agents, enabling dynamic keyframing in regions of spatial overlaps with other agents, enhancing submap alignment. Afterwards, a central server aligns submaps using VGGT as a view alignment model. This bidirectional communication keeps communication cost low during mapping and global reconstruction in difficult GNSS-denied environments. Experiments on multiple datasets demonstrate competitive tracking performance, improved rendering quality over state-of-the-art methods, and accurate submap alignment.
State-of-the-art 3D reconstruction models, whether from visual, range, or both, tend to underperform on thin objects. This is partially due to the small amount of space such objects occupy in RGB images and in 3D point clouds. To test the extent of their errors, we collected the first thin object dataset comprising of synchronized RGB images, depth maps, and tactile response maps, where each frame is associated with inertial measurements, camera pose and calibration, and groundtruth depth and segmentation maps obtained from laser scanning of thin objects. We hypothesize that tactile data can aid in the reconstruction of thin objects as their response maps provide local shape and deformation information. Our dataset, termed VisTa3D, comprises of 387 scenes covering 70 thin objects over 17 environments. We benchmarked current 3D reconstruction models on VisTa3D and found that, indeed, they exhibit low fidelity on thin objects. To test if tactile data can help, we introduce the first visual-range-tactile 3D reconstruction model as a baseline. Code and data: https://huggingface.co/datasets/shaniaguo/VisTa3D.
Current Vision-based SLAM systems fail catastrophically when motion blur corrupts the visual input, as they attempt the ill-posed inverse problem of recovering sharp content from degraded observations. We present MotionGS-SLAM, which fundamentally reimagines motion blur handling through a paradigm shift: rather than removing blur artifacts, we reformulate the challenge as a well-constrained forward problem that generatively models blur formation within the rendering pipeline. By leveraging event cameras' microsecond temporal resolution and immunity to motion blur, we introduce a novel event-modulated Gaussian kernel that dynamically adapts each Gaussian's rasterization based on precise motion cues. Our dual-modulation mechanism transforms 2D Gaussian projections from isotropic dots into anisotropic, motion-aligned elliptical brush strokes (spatial modulation) while adaptively varying exposure integral sampling density based on local velocity (temporal modulation). This physics-based approach enables joint optimization of intra-exposure camera trajectories and 3D scene geometry through blur-aware photometric and event-based constraints. Extensive experiments demonstrate significant improvements over state-of-the-art methods in trajectory accuracy and map quality under severe high-motion conditions.
Jiaming Chen, Juntao Yang, Zhentao Zou +6cs.RO cs.AI
Accurate 3D reconstruction of ships at sea is important for maritime supervision, damage assessment, and autonomous maritime operations. Although 3D reconstruction has advanced considerably, high-quality data acquisition still largely relies on manually designed trajectories or skilled operators, resulting in high costs and limited scalability. Next-best-view (NBV) planning automates this process by selecting subsequent viewpoints based on the current state. However, existing NBV policies mainly model spatial occupancy while overlooking directional observation history. This limitation is particularly problematic for ships: their complex superstructures and severe self-occlusions require observations from multiple viewpoints, and insufficient directional coverage often yields incomplete reconstructions. These challenges are further amplified at sea, where wave-induced heave, roll, and pitch continuously alter the ship's pose and surface visibility. Meanwhile, wind disturbances and limited onboard power impose stricter requirements on scanning efficiency. To address these challenges, we propose DA-NBV, a direction-aware NBV policy that augments the conventional occupancy state with directional observation statistics. We introduce a learnable Position Advantage Field (PAF) that uses directional information to guide viewpoint selection. The policy further adopts a locally constrained action space and a nonlinear coverage-shaping reward to improve scanning efficiency. We also develop the ship-oriented SeaShip-3D dataset and a configurable sea-state simulation environment. Experiments under varying heave, roll, and pitch conditions show that DA-NBV improves reconstruction completeness by approximately 3 percentage points and reduces Chamfer distance by 43% while achieving higher path efficiency.
Kilian Northoff, Mateo de Mayo, Daniel Cremerscs.RO cs.CV
3D Gaussian Splatting (3DGS) provides efficient rendering of photo-realistic scenes, but its heavy preprocessing and training steps make it a poor fit for applications that require real-time reconstruction in robotics or XR. This capability is important since it allows immediate feedback and interaction with new environments. Visual-inertial odometry (VIO) and simultaneous localization and mapping (VI-SLAM) systems, on the other hand, specifically target these real-time applications, which makes them a good choice for integration with 3DGS. We propose a new method that tracks and reconstructs simultaneously in real-time by leveraging an efficient visual-inertial tracking system based on Basalt together with a novel incremental method built on top of Brush, an efficient Rust-based GPU-vendor-agnostic implementation of 3D Gaussian Splatting. We show that many of the heavy preprocessing and training steps of 3DGS can be replaced with a more efficient incremental training strategy that has direct access to the information generated by the visual-inertial tracking system. Furthermore, we propose and combine multiple practical improvements to increase the efficiency of the training pipeline and adapt it to run in real-time, parallel to the tracking thread. This work highlights the value of exploiting the complementary nature of SLAM and 3DGS, and how that can lead to promising results for real-time 3D reconstruction.
Existing Gaussian-splatting-based monocular Simultaneous Localization and Mapping (SLAM) systems are either tailored to short sequences, are not real-time, or suffer from prohibitive GPU memory requirements, limiting their applicability in realistic, long-horizon scenarios. To address this, we present GLAM-SLAM, a real-time, decoupled Gaussian-splatting SLAM system designed for large-scale outdoor scenes. We ensure lightweight tracking using a robust, feature-based SLAM frontend, while for mapping, we adopt a structured, sparse anchor grid representation that ensures scalable operation and maintains scene coherence across long-term sequences. To satisfy the dense initialization requirements of 3D Gaussian Splatting (3DGS), we introduce a geometry-based flow-densification anchoring strategy using epipolar constraints. Furthermore, by treating mapping as a multi-scene problem, we propose a scene-partitioning strategy that introduces a strong spatial inductive bias via MLP initializations to generate localized Gaussians. We evaluate our system on the challenging, long-sequence KITTI Odometry, Oxford RobotCar, and M'alaga datasets. Extensive ablations and comparisons demonstrate a 15% improvement in reconstruction quality over the second-best performer, while maintaining real-time performance and the ability to scale to longer sequences. Code is publicly available for the benefit of the community.
Autonomous exploration of unknown 3D environments is traditionally driven by coverage-maximizing geometric heuristics. However, these methods typically determine exploration targets without considering the underlying structural context. This leads to inefficient trajectories often limiting the fidelity of the final 3D reconstruction. To bridge the gap between spatial coverage and reconstruction quality, we introduce a novel paradigm: reframing exploration as a geometric anomaly minimization problem. We present SCAGE: SCene Anomaly Guided Exploration, a novel autonomous exploration framework that operates directly on unstructured 3D point clouds. Instead of blindly chasing volumetric boundaries, we equip the robot with a foundational understanding of standard indoor architecture. As the robot navigates, it continuously evaluates its live 3D observations against these learned expectations. When the incoming geometry contradicts the learned priors of a typical indoor environment, such as a fragmented wall or a partial table, the system flags these regions as scene anomalies. These geometric inconsistencies act as a guiding signal, naturally drawing the robot to investigate and resolve these structural anomalies from optimal vantage points. By actively targeting poorly reconstructed regions rather than just empty space, our approach seamlessly couples spatial discovery with high-fidelity mapping. Extensive evaluations demonstrate that SCAGE achieves superior volumetric coverage (~90% in all scenes) and higher 3D reconstruction quality compared to state-of-the-art baselines.
We propose a mask-free method for lossless multi-object 3D reconstruction from sparse and occluded real-world views, enabling physically plausible robotic interaction via Material Point Method (MPM) simulation. Our key insight is that object coupling stems from occlusion and limited viewpoints, which we address by formulating multi-object decoupling as a sparse-view reconstruction problem. Using 3D Gaussian Splatting as base representation, we first obtain coarse instance partitions with a SAM2-trained segmentation field. Rather than relying on masks, we reconstruct fragmented geometries by leveraging a joint Score Distillation Sampling (SDS) process, which integrates reference-view supervision with novel-view synthesis guided by 2D and 3D diffusion priors to enforce both texture fidelity and 3D consistency. Furthermore, we incorporate geometry-aware priors such as intra-object and inter-object similarity to regularize geometric reasoning. Experimental results demonstrate that our method produces complete, simulation-ready 3D objects without requiring manual masks, enabling realistic dynamic interactions on both synthetic, robotic and real-world datasets.
Edward Beng Wai Tan, Siew-Kei Lam, Dongshuo Zhangcs.RO cs.CV
Recent 3DGS-SLAM systems enable real-time operation by leveraging conventional feature matching or ICP-based tracking, thereby avoiding the heavy dense photometric optimization used in earlier approaches. However, feature matching remains prone to failure in textureless environments, while ICP-based tracking struggles in structureless or geometrically degenerate scenes due to ill-conditioned optimization. To address this issue, we propose Spectral GS-SLAM, an efficient yet robust tracking framework that integrates ICP with complementary feature-based constraints. Our method mitigates numerical instability by adaptively compensating under-constrained directions in degenerate scenarios, without interfering with the shared Gaussian representation used for mapping. We further introduce a Gaussian-aware planarity weighting mechanism that exploits the intrinsic covariance structure of 3D Gaussians to characterize scene geometry and guide information fusion. Extensive evaluations on challenging TUM RGB-D sequences demonstrate that Spectral GS-SLAM achieves real-time performance (40.14 FPS) while maintaining consistent tracking in both structureless and featureless environments. The proposed method preserves trajectory integrity in degenerate scenes while maintaining competitive performance in non-adverse conditions.
Generalist vision-language-action systems need object-centric 3D evidence and reusable manipulation experience to plan reliable robot trajectories. GeneralVLA provides a hierarchical interface for converting language and RGB-D observations into 3D end-effector paths, but two bottlenecks remain. First, monocular SAM3D-style object reconstruction can hallucinate pose and unseen geometry, while manipulation benefits from stable object shape when calibrated multi-view observations are available. Second, the original KnowledgeBank mainly retrieves semantically similar snippets and appends new knowledge, which makes it difficult to control memory quality, conflicts, confidence, and geometric relevance. To address the first challenge, we introduce GeoFuse-MV3D, a geometry-prior-guided MV-SAM3D reconstruction branch that verifies external geometry cues with input-view masks, applies soft visual-hull support, performs axis-wise refinement, and fuses only geometry while preserving appearance. To address the second challenge, we upgrade KnowledgeBank into a governed long-term memory system with explicit quality, confidence, lifecycle, verifier, and conflict metadata, together with precision-oriented retrieval. Finally, we evaluate the reconstruction branch on GSO-30 and the memory module on Terminal-Bench 2.0 and SWE-Bench Verified; GeoFuse-MV3D improves over the MV-SAM3D baseline by reducing CD and LPIPS by 2.20% and 2.02% while increasing PSNR and SSIM by 2.36% and 1.03%, and KnowledgeBank improves over ReasoningBank by 4.53% on Terminal-Bench SR and 3.73% on SWE-Bench resolve rate, while reducing AS by 4.95% and 5.65%, respectively. Code: https://github.com/AIGeeksGroup/GeneralVLA-2. Website: https://aigeeksgroup.github.io/GeneralVLA-2.
This paper presents a contact-based 3-D surface measurement method based on a Digital Fringe Projection (DFP) system, belonging to the vision-based tactile sensing family pioneered by the commercially successful GelSight sensor. Such sensors have proven effective for robotic fingertip manipulation and contact sensing. However, because GelSight employs photometric stereo with RGB LEDs, it does not measure absolute depth directly but instead infers it by integrating estimated surface gradients, which can accumulate reconstruction errors; in addition, it becomes increasingly difficult to calibrate as the sensing area grows, and its depth accuracy is challenged on highly reflective or transparent objects. To overcome these drawbacks, we propose a fringe-projection-based contact measurement technique that performs triangulation-based 3-D reconstruction on a coated silicone contact surface, providing dense per-pixel surface geometry and full-field 3-D shape measurement over the contact region. By integrating high-accuracy digital fringe projection into the sensor, our approach simplifies calibration over larger areas and enhances depth precision for complex surfaces. Experimental results, including a direct comparison with a GelSight Mini sensor, a sphere-fitting accuracy evaluation, and an uncertainty analysis, confirm that the proposed method significantly improves the accuracy and stability of structured-light-based 3-D measurements, allowing reliable reconstruction of objects with diverse optical properties.
Tactile imaging seeks to reconstruct the internal structure of soft objects through touch sensing, with applications in medical diagnosis and robotic manipulation. Recent self-supervised learning approaches have shown promising results, but rely on global, unstructured representations and robot-controlled sensing, limiting generalization and practical use. We propose Local Encoder for Spatial Sensing (LESS), an object-centric tactile representation that exploits the local nature of touch. The tactile scene is modeled as a grid of recurrent encoders with local receptive fields, whose states are fused to reconstruct 2D or 3D images of internal structure. This compositional design enables strong generalization: models trained on single-inclusion phantoms accurately image objects with multiple inclusions and varying sizes. The local structure further supports spatial uncertainty estimation. In addition, we enable hand-held tactile imaging via external pose tracking and human-like palpation data, and extend tactile imaging to full 3D reconstruction.
Robotic grasping is a fundamental capability in robotic manipulation. Yet grasping remains challenging under partial observations. Reliable grasping depends on both local contact cues and object-level 3D structure. Existing geometry-aware grasping methods recognize the value of reconstruction, but they typically treat geometry as an intermediate prediction rather than a reusable object prior for grasping. In this paper, we present GraspFoM, a unified framework that leverages 3D foundation priors (SAM3D) to build a shared 3D object latent for both reconstruction and grasp pose prediction. Built on this shared object latent, we introduce an anchor-initialized truncated pose-reasoning diffuser that predicts continuous and multimodal grasp poses without directly relying on discrete grasp candidates. We further investigate the interaction between reconstruction and grasping through a reconstruction-aware scorer and a residual latent updater. Reconstruction provides grounded geometric cues, while grasp supervision refines the shared object latent toward grasp-relevant affordances. GraspFoM jointly predicts grasp poses and reconstructs high-fidelity 3D assets in mesh and 3DGS forms. Comprehensive experiments demonstrate that GraspFoM achieves state-of-the-art results on both reconstruction and grasping. Notably, these improvements require only a small number of additional trainable parameters. Component-wise ablation studies also demonstrate the contribution of each component.
Jingsen Zhu, Silvia Sellán, Alexander Terenincs.GR cs.CV cs.LG stat.ML
We develop a framework for task-specific active next-best-view selection in 3D reconstruction from point clouds, by casting the problem in the language of Bayesian decision theory. Our framework works by (a) placing a prior distribution over the space of implicit surfaces, (b) using recently-developed stochastic surface reconstruction methods to calculate the resulting posterior distribution, then (c) using the posterior distribution to carefully reason about which view to scan next. This enables us to perform camera selection in a manner that is directly optimized for the intended use of the reconstructed data - meaning, we reduce uncertainty only in those regions that make a difference in the task at hand, as opposed to prior approaches that reduce it uniformly across space. We evaluate our method across three distinct downstream tasks: semantic classification, segmentation, and PDE-guided physics simulation. Experimental results demonstrate that our framework achieves superior task performance with fewer views compared to commonly used baselines and prior general uncertainty-reduction techniques.