Concept of a Sensor Test Environment for Dusty Agricultural Conditions

Dust in agriculture presents a significant challenge for autonomous agricultural machinery. Dust can impair the performance of sensors and algorithms. This work, therefore, presents a concept for a proving ground consisting of an indoor and outdoor area. The indoor area comprises a laboratory test bench where dust circulates in a closed system and a test hall where life-size objects can be placed. The outdoor area features dedicated test setups that enable reproducible data to be recorded with and without dust during real-world agriculture work. The proving ground and the setups are visualized in 3D.

AGRICAM: A Track-Mounted Crop Pollination Monitoring Robot

Insect pollination is critical for global food production, yet monitoring pollinators at commercial farm scale remains a challenge. Recent advances in computer vision and deep learning have enabled detailed analysis of pollinator behaviour, but monitoring must trade-off detail against spatial coverage and human or technological resources. This paper presents the Automated Guided Robot for Insect and Crop Activity Monitoring (AGRICAM), a purpose-built robotic system designed to meet the requirements of large-scale pollination monitoring in protected cropping systems. AGRICAM operates autonomously on low-cost, easily installed track for movement along crop rows, without disrupting farm operations or insect behaviour. The platform integrates two RGB cameras, microclimate sensors, GPS and RFID modules, motion sensors, and 4G cellular network connectivity for data transmission. A web interface enables remote device configuration and scheduling. The system autonomously captures video and image data of insects' locations and local environmental conditions. These are transferred to the cloud and analysed using computer vision models to quantify pollinator visitation and spatio-temporal activity variation. We deployed the system on a commercial blueberry farm to demonstrate and test its capability. It successfully mapped insect pollination patterns across 80 m long industrial polytunnels over 30 hours. This data enabled spatial analyses of insect activity we used to confirm a uniform pollinator distribution within polytunnels, as desired by the farm management team. The data also highlighted variation of insect activity associated with time of day and microclimate. AGRICAM therefore has been shown to be a scalable, automated crop pollination monitor that can support data-driven decisions to enhance pollination management, thereby improving crop productivity and food security.

TS-MAMP: A Remanufactured Agricultural Robot Powered by Second-Life EV Components and NMS-Free On-Device Weed Detection

Agriculture 4.0 robotic systems improve field efficiency yet remain too capital-intensive for the fragmented smallholdings that dominate global agriculture. Meanwhile, a growing number of retired low-speed electric-vehicle (LSEV) powertrains retain functional electromechanical value but are destructively recycled. This paper presents TS-MAMP (Telescopic-Sleeve Modular Agricultural Mobile Platform), a remanufactured robot built under 3R (reduce, reuse, recycle) circular-economy principles. Retired 48 V brushless-DC (BLDC) hub motors are paired via back-EMF matching, and lead-acid battery modules screened at 60%-80% state of health are actively balanced within a 100 mV inter-module voltage deviation. Together, these reused components reduce the powertrain-and-chassis BOM cost by approximately 60%, to below USD 450 (perception and weeding modules excluded). The truss chassis provides >=200 kg static load, continuously adjustable track width from 1200 mm to 2000 mm, and <=5-minute module changeover. An NMS-free (non-maximum-suppression-free) YOLOv10n detector with consistent dual-assignment training and negative-sample learning achieves 80.87% mean average precision (mAP)@0.5 (58.41% mAP@0.5:0.95) on the Wanxi Crop-Weed dataset, and is deployed via FP16 TensorRT on a Jetson Nano, confirming on-device inference feasibility. TS-MAMP demonstrates that retired EV components, under modest screening, can be re-engineered into affordable, AI-enabled agricultural robots--opening a remanufacturing pathway for the smallholder fields that commercial automation leaves unserved.

Enabling 24-hour Agricultural Robotics: Unsupervised Day-to-Night Cross-Modal Image Translation for Nighttime Visual Navigation

While visual navigation has been extensively studied in agricultural robotics, most existing systems assume daytime conditions. In fact, deploying autonomous robots at night offers significant advantages, including 24-hour crop and soil monitoring, fruit harvesting, and nocturnal pest detection. Modern vision-based systems, however, rely heavily on large-scale well-annotated image datasets, which remains challenging to obtain for nighttime operation scenarios. To address this, we propose an unsupervised image translation framework that converts daytime plant-row RGB images into near-infrared (NIR) nighttime counterparts without requiring pixel-to-pixel supervision. This enables the direct reuse of daytime semantic labels for training nighttime perception models. In particular, by incorporating a pre-trained Contrastive Language-Image Pre-training (CLIP) model, the proposed framework is designed to preserve semantic consistency during day-to-night translation. Additionally, a visibility mask is introduced to account for the limited effective range of NIR illumination in nighttime scenes. We conduct comparative evaluations with state-of-the-art image translation baselines and demonstrate higher image qualities, as supported by improved performance in downstream semantic segmentation for nighttime visual navigation. For evaluation, we utilize AgriNight--a novel dataset comprising 428 daytime and 549 nighttime images collected using night-vision-equipped mobile robots in agricultural fields and manually annotated with pixel-wise semantic labels--and introduce it as the first benchmark for nighttime agricultural visual navigation. We also perform real-time autonomous navigation experiments with a physical robot operating at night. The data and code are available at: https://github.com/mamorobel/AgriNight.

OrchardBench: A Physically-Grounded, GPU-Parallel Apple-Orchard Simulation Benchmark for Agricultural Robotics

Robotic tree-fruit harvesting is a flagship problem for agricultural automation, but progress is bottlenecked by the cost and irreproducibility of field experiments: an orchard is available only weeks a year, every tree is different, and a control error can permanently damage the crop or the plant. The tree models used in graphics and agronomy are geometrically detailed but physically inert, while the GPU-parallel simulators used in robot learning contain no plausible trees. We present OrchardBench, a physically-grounded, GPU-parallel simulation of apple-orchard trees on the Newton engine. Each tree is grown by a stochastic L-system and instantiated as a fully articulated body: branches are compliant torsional spring-dampers whose stiffness follows Euler-Bernoulli beam theory, they break at a wood modulus of rupture and fall as free hinges, and apples are independent bodies on stem tethers that detach at literature-grounded pull forces and load the branch when pulled. A moving, density-controllable foliage layer occludes the canopy as real leaves do. Every physical parameter is tied to a published source. Per-environment domain randomization makes each batched world a distinct tree, and a mobile manipulator with a wrist depth camera closes the loop with geometric fruit perception and an autonomous harvesting baseline. Careful engineering of the solver and the model lets OrchardBench run many parallel environments at interactive rates on a laptop GPU. We define the tasks and a metric suite spanning harvest completeness, throughput, and plant damage (with a per-canopy-zone breakdown), and report baseline results across foliage, fruit load, terrain, canopy zone, and parallelism. The analytic baseline succeeds on about 40% of the fruit it detects and harvests only about an eighth of the reachable fruit on a tree, leaving clear headroom for novel autonomy approaches.

LeCropFollow: Latent Space Planning for Navigation in Unstructured Crop Fields

Unstructured navigational features, such as irregular planting or discontinuities, remain the primary failure mode for under-canopy agricultural robots. Existing geometric approaches often fail in these scenarios because they compress high-dimensional visual data into deterministic spatial references, effectively discarding the uncertainty and semantic context required to navigate ambiguous terrain. To address this, we present LeCropFollow, a visual navigation framework that bypasses explicit geometric modeling in favor of a learned latent representation. By integrating a self-supervised semantic heatmap extractor with TD-MPC2, a Model-Based Reinforcement Learning (MBRL) planner, our system optimizes trajectories directly within a latent manifold. The framework operates over the uncompressed heatmap signal, preserving the semantic context that geometric reductions discard. We demonstrate that this representational shift enables zero-shot transfer from simplified simulation to the physical world without fine-tuning. Extensive field experiments in late-stage corn fields show that LeCropFollow matches state-of-the-art baselines in unstructured rows but significantly outperforms them in plantation gaps, achieving a 2.4x reduction in semantic failures compared to keypoint-based methods. These results suggest that latent planning offers a robust alternative to geometric estimation for operations in heterogeneous agricultural environments. Code, models, and data available: https://felipe-tommaselli.github.io/lecropfollow .

Unsupervised Memory-Enhanced Video Transformers: Obstacle Detection for Autonomous Agricultural Rover

While autonomous rovers have become indispensable to precision farming, achieving consistent operational safety remains a critical challenge. Conventional safety sensors, such as LiDAR, fail to detect obstacles positioned below the plant canopy, posing a significant risk. While camera-based supervised learning methods can detect common objects, they perform poorly when faced with obstacles that were not present in their training data. Actual unsupervised anomaly detection offers a solution by learning the normal visual patterns of an environment, but often fails for the dynamic scenes captured by a moving rover.\\ This paper introduces Video Memory Transformers for Anomaly Detection (VMTAD), a fully unsupervised method designed for real-time obstacle detection in dynamic agricultural scenes. VMTAD utilizes a transformer-driven architecture augmented with a dedicated memory module. This memory module leverages temporal context by processing encoded representations of preceding frames. This approach enables the system to effectively address the dynamic context caused by the robot's movement. The model is trained using only images that represent normal operation, requiring no data labels.\\ VMTAD was rigorously evaluated on the 'Grillion' agricultural rover. On a challenging rapeseed dataset, VMTAD achieved state-of-the-art performance, reaching a 0.973 detection and 0.997 segmentation Area Under the Receiver Operating Characteristic curve. A lightweight variant provides an optimal balance of high accuracy and real-time inference (14 ms), which is critical for safety, as confirmed by our analysis of the rover's total stopping distance.

Heterogeneous LiDAR Early Fusion and Learned Re-Ranking Strategy for Robust Long-Term Place Recognition in Unstructured Environments

Robust localization in unstructured environments, such as agricultural fields, is a critical challenge for autonomous systems. LiDAR sensors provide detailed 3D information about the environment and are invariant to lighting conditions. For this reason, LiDAR-based place recognition methods have gained significant attention. In this paper, we propose MinkUNeXt-VINE++, a novel approach that combines early fusion of heterogeneous LiDAR data from two sensors (Livox Mid-360 and Velodyne VLP-16) and a learned re-ranking strategy in inference time. This fusion leverages the strengths of each sensor to provide a more comprehensive representation of the environment. Additionally, the re-ranking approach is particularly important in repetitive environments, such as vineyards, as finding true positives is a major challenge. We evaluated our approach using the TEMPO-VINE dataset, which provides heterogeneous LiDAR data in vineyard environments across different phenological stages. Our results demonstrate that MinkUNeXt-VINE++ significantly improves place recognition performance compared to single-sensor approaches and state-of-the-art methods. MinkUNeXt-VINE++ achieves a 20% improvement in the Recall@1 metric compared to single-sensor approaches, and +30% including re-ranking. The code of our method is publicly available for reproduction.

From Simulation to the Real-World: An In-Field 6D Pose Dataset and Baseline for Robotic Strawberry Harvesting

Robotic strawberry harvesting requires precise 6D pose estimation; however, collecting 6D pose ground truth in real agricultural fields is inherently challenging. Existing strawberry 6D pose estimation studies have therefore relied mainly on synthetic data, leaving their in-field performance unquantified. In this work, we obtain ground truth indirectly, by recovering camera poses via PnP, reconstructing each scene at metric scale, and annotating a single 3D bounding box per strawberry that is propagated across all frames, yielding, to the best of our knowledge, the first real world 6D pose ground truth dataset of red-stage strawberries collected at an actual strawberry farm (12,040 images). We also introduce a synthetic dataset rendered in NVIDIA Isaac Sim, featuring scene-level realism and domainrandomization. Despite this improved simulation setup, models trained on synthetic data alone fail to transfer to in-field images, while introducing a small amount of real data improves both translation and rotation accuracy across all backbones. Under the monocular RGB setting evaluated here, rotation is largely recovered once real data is used, and depth is what limits pose accuracy. These baselines across backbone encoders serve as a reference for future work. The real-world dataset is publicly available at https://huggingface.co/datasets/WoojungSon/F ieldStraw6D, and the data-collection pipeline is available at https://github.com/wjson2435/FieldStraw6D-pipeline.