Act with Intent: Distilling Behavior Intent for Vision-Language-Action Models

Vision-Language-Action (VLA) models can turn multimodal context into robot actions, but their action decoders are still trained largely by behavior cloning. This supervises which motor command was demonstrated while leaving implicit the local objective served by the behavior under the instruction. Future-based supervision enriches action learning with frames, latent observations, trajectories, or motion representations, but these signals capture particular realizations of what may happen rather than the shared semantic objective of the forthcoming behavior. We propose Intention Distillation (INDI), which distills behavior-level intent into the action decoder. During training, a frozen teacher VLM interprets a demonstrated segment from the current observation, instruction, coarse action summary, and corresponding execution video. From its standard inputs, the deployed VLA recovers the resulting multimodal intent representation at an intermediate decoder layer and uses it to organize action prediction together with representations of how the behavior unfolds and what it achieves. On SimplerEnv-Bridge, INDI improves GR00T-N1.7 from 64.3% to 84.7%, and on RoboCasa Kitchen it improves the controlled GR00T-N1.7 baseline from 64.1% to 70.3%, with consistent gains on $π_{0.5}$ across both benchmarks. In real-world tasks, INDI improves average success from 62.0% to 68.7%, with gains of up to 12.0 pp on longer-horizon tasks. Further analyses show that the recovered latent is used by the decoder, captures behavior objective and execution progress, and organizes downstream predictions in an objective-dependent manner. These results show that action decoders benefit from explicitly modeling the semantic objective of the behavior they generate.

Pre-training Visual Dexterity in Simulation

Large-scale pre-training has made robot policy fine-tuning increasingly data-efficient, but this progress has largely been driven by datasets and embodiments built around simple parallel-jaw grippers. Dexterous, multi-fingered hands remain comparatively data-starved because real teleoperation is costly to scale, while human hand video is off-embodiment and requires lossy pose estimation and retargeting. We introduce Simulation Pre-training for Dexterity (SPD), a pre-training framework for dexterous manipulation that uses data entirely collected in simulation. In SPD, humans manipulate virtual objects inside a VR headset, enabling on-embodiment trajectories and robot-free collection. With the help of five operators, we collect 75 hours of multi-task dexterous manipulation over one week, and use it to pre-train a causal transformer on a sequence modeling objective. We study the benefits of simulation pre-training on real-world tasks by fine-tuning on 1-2 hours of physical demonstrations on a 56-DoF bimanual dexterous setup. We find that our approach outperforms training behavior cloning policies from scratch, showing that simulation teleoperation is a viable pre-training source for real-world dexterous manipulation. We perform ablation studies, measuring the benefits of history conditioning and short action chunks for reactive control.

Mirror Learning

We investigate imitation learning through the lens of third-person observation and propose a framework for mirror learning: acquiring actionable policies from passive observation. While behavior cloning (BC) excels under dense, well-aligned first-person data, it fundamentally fails to leverage the rich observational signals arising from third-person demonstrations that humans and animals routinely exploit. We introduce a method that composes (i) a learned perspective transformation that places learners in demonstrators' shoes using a fine-tuned video diffusion model and (ii) an inverse dynamics model that infers action trajectories in the learners' control space. This enables the synthesis of mirror data, pseudo first-person expert data generated from third-person observations of demonstrator behavior. Empirically, we show that mirror data alone can train effective policies, and that augmenting first-person BC training with mirror data further improves downstream policy performance. Our results suggest that modern generative world models implicitly encode sufficient structure to enable a scalable and safe alternative to teleoperation-heavy data collection.

Cortex: Compact Behavior Cloning for Quake with Frozen Visual Features

We study how far a deliberately simple behavioral-cloning policy can progress in a visually rich first-person game before adding reinforcement learning or explicit memory. Cortex is a compact Quake policy with 10.98 million trainable parameters in a six-layer transformer over a frozen DINOv3 encoder. It is trained on the Quake subset of the public Pixels2Play corpus: 6,849 recordings (about 474.7 hours), represented as 17.09 million cached decision frames with keyboard and mouse actions. One sampled training epoch uses 517,048 four-frame windows and takes 3.3 minutes of policy-head optimization on one RTX 5080, excluding one-time feature extraction. We evaluate two independent batches of 20 stochastic, 120-second episodes on Quake E1M1. Cortex does not complete the level, but every episode reaches the opening door, button room, and gate descent; 19 of 20 episodes in each batch record at least one kill. Under the same time-controlled harness, released P2P-150M and NitroGen checkpoints remain shallower in five matched-duration episodes each. These comparisons are limited by small reference samples and different native interfaces. Ablations show that denser visual tokens improve combat and survival, while longer optimization and naive action history improve offline metrics without consistently improving play. The remaining failures are consistent with covariate shift and motivate targeted corrective data. We release the policy implementation, checkpoint, and a representative rollout.

Generalizable VLA Finetuning via Representation Anchoring and Language-Action Alignment

Finetuning a pretrained vision-language model (VLM) on robot demonstrations via behavior cloning (BC) has become the standard recipe for vision-language-action (VLA) policies. However, BC finetuning progressively overwrites the pretrained representations that support visual and semantic generalization. Co-training on web image-text data, a common remedy, does not prevent this; it applies language and action losses to separate observations, leaving VLAs with language-action misalignment that standard manipulation benchmarks do not expose. We propose Anchor-Align, which augments BC with two objectives: Vision-Language Anchoring distills layer-wise representations from a frozen VLM copy to prevent this drift, while Language-Action Alignment converts each action target into a discrete motion-direction label and jointly trains language and action prediction on the same robot observation. On a physical xArm7 robot, across two widely used VLA architectures, Anchor-Align improves real-robot success on both (28% to 54% and 37% to 60%). At scale in simulation, we demonstrate consistent improvements on OOD perturbations, perceptual robustness, and long-horizon control across LIBERO-PRO, LIBERO-Plus, and CALVIN, respectively, suggesting that preserving pretrained representations and effective action learning are not fundamentally at odds. Project page: anchoralignvla.github.io

Qantara: Bridge-Flow Training for Multi-Paradigm JEPA Control

Joint-Embedding Predictive Architectures (JEPAs) underpin a growing family of latent world models for control from raw pixels, but every existing JEPA world model commits at training time to a single inference paradigm: either trajectory optimisation in a learned dynamics model, or direct behaviour cloning. A single checkpoint that serves both would defer this choice to inference, when deployment constraints (rollout cost, observation accessibility) determine which path wins. We present Qantara, an end-to-end JEPA whose joint training objective pairs a Brownian-bridge interpolant between consecutive clean latents on the state axis with noise-to-data flow matching on the action axis. The same checkpoint serves three inference paradigms without retraining: latent planning, behaviour-cloning action sampling, and inverse dynamics, which we query through a video-inverse composition that first predicts the next latent without action conditioning, then extracts the action. Training concentrates mass on the edges of the (action-time, state-time) noise square, where inference queries the predictor: replacing it with uniform interior sampling drops Push-T planning from 90.1 to 53.3 SR at matched compute. On the LeWM control suite, Qantara reaches a 91.2 SR three-train-seed average and sets new SOTA on OGBench-Cube (+7.7 SR over DINO-WM, +19.7 over LeWM). From the same weights, the behaviour-cloning and video-inverse paths reach 82-83 SR on Push-T and 71-73 SR on Cube. These results move JEPA world models from single-paradigm planners to multi-paradigm controllers.

Behavior Uncloning: Distilling Mode Redirection into Policy Weights without Inference-Time Steering

Behavior-cloned policies often learn multiple behavior modes from demonstration datasets, including modes that are unsafe or otherwise undesired at deployment. For example, a policy trained on diverse handover demonstrations may learn to pass a knife blade-first. Standard remedies such as data curation and inference-time steering either require access to the original demonstrations for full retraining or add substantial inference-time overhead. To address this gap, we propose MoRE(Mode Redirection), which redirects policy rollouts toward desired behavior modes through a short "uncloning" step. Specifically, MoRE distills the redirection signal from a temporary mode classifier into the policy weights to steer behavior. A retain loss balances this edit by preserving desired-mode competence, allowing the standalone policy to suppress unwanted modes with zero inference-time overhead. Across eight simulated and real-world tasks, MoRE improves the average deployment success rate (SR) by 44 percentage points over the original mixed-mode policy. Among all compared adaptation and steering baselines, MoRE achieves the strongest SR and approaches the filtered-data retraining reference, while preserving task competence and inference speed. MoRE also generalizes across robot policy backbones, including Diffusion Policy and the Pi0.5 VLA, diverse task categories, and real-world deployments.

ReGuide: From Test-Time Guidance to Self-Improving Diffusion Policies

Behavior-cloned diffusion policies are expressive but remain vulnerable to covariate shift: small deviations from demonstrated states can compound into task failure. Existing methods address this either by expanding the training distribution through expert corrections or synthetic augmentation, or by steering a frozen policy at test time with guidance from a learned model. The former can be expensive or assumption-dependent, while the latter discards the corrected trajectories after execution. We introduce ReGuide, a self-improving framework that treats guided rollouts as reusable on-policy recovery data. ReGuide first uses Phase-Conditioned Guidance (PCG) to generate corrective rollouts: it constructs phase-specific latent targets, applies guidance only in the drifted-but-recoverable regime, and guides through the estimated clean action to match the dynamics model's training distribution. Successful guided rollouts are then absorbed back into the policy through ReGuide-FT, which fine-tunes the current checkpoint, or ReGuide-FS, which retrains from scratch on the augmented dataset; the two can also be composed and iterated. On Robomimic Can, Square, Transport, and Tool Hang, ReGuide improves base-policy success by $1.3$--$7.7\times$, outperforms LPB in the test-time-only setting, and matched-data ablations show that the gains come from guided recovery data rather than additional rollouts alone.

Decoupling the Declarative from the Procedural in Vision-Language-Action Models

Deploying generalist robotic agents in the real world requires transferable skills. Specifically, a policy trained to clone a behavior from object-specific demonstrations must generalize beyond that object, otherwise data collection requirements become intractable. Recently, fine-tuning of pre-trained billion-parameter Vision-Language Models (VLMs), initially on large-scale robot datasets and then on fewer scenario-specific demonstrations, has emerged as the predominant paradigm for designing Vision-Language-Action (VLA) models. While these policies achieve state-of-the-art manipulation performance in-distribution, they remain brittle to minor spatial, semantic, and task variations. In this work, we address the inability of current models to decouple the declarative (i.e., concepts and entity semantics) from the procedural knowledge (i.e., how to do something) encoded in their parameters, which is a fundamental bottleneck for zero-shot skill transfer to novel objects. To address this, we propose w$^{2}$VLA, a new VLA model with restructured information flow. Rather than feeding all multimodal tokens from the VLM encoder into a large, opaque transformer-based action expert, our approach modulates the robot state sequence with visual, spatial, and skill information in a compositional and interpretable manner. Unlike popular, state-of-the-art VLAs, we show that our modular approach successfully decouples knowledge representations, enabling robust behavior cloning and unprecedented zero-shot skill transfer capabilities across dissimilar, unseen objects.

FACTR 2: Learning External Force Sensing for Commodity Robot Arms Improves Policy Learning

Contact-rich manipulation requires force sensitivity, but many robot arms lack dedicated force sensors due to their high cost. We present Neural External Torque Estimation (NEXT), a data-driven method that estimates external joint torques without needing any dedicated force sensors. NEXT trains in 1 minute from only 10 minutes of free-motion data, yet achieves estimates comparable to dedicated joint-torque sensors. NEXT enables force-feedback teleoperation on low-cost arms and improves policy learning through Force-Informed Re-Sampling Training (FIRST), which up-samples pre-contact and contact segments during behavior cloning. Across five long-horizon tasks, FIRST outperforms prior force-aware policies by over 17% in task progress. Together, NEXT and FIRST bring force-aware teleoperation and policy learning to off-the-shelf robots without additional sensing hardware. Video results and code are available at https://jasonjzliu.com/factr2

What Demonstration Curation Metrics Do to Your Policy

We study whether demonstration-curation metrics that detect defective training episodes also improve the downstream behavior-cloning policy that trains on the curated data. On a contact-rich LIBERO pick-and-place benchmark with a controlled structural defect (early gripper release during the carry phase), we find that the two quantities are sharply decoupled. The metric with the highest defect-detection AUROC (0.804) produces the worst curated policy (13.3% task success), while a metric with a substantially lower AUROC (0.638) produces a policy that nearly matches the oracle trained on ground-truth clean data (90.0% vs. 93.3%). We further show that five of the seven metrics we evaluate exploit episode length as a trivial proxy for the defect label, a confound that inflates reported AUROCs to near-perfect values and disappears once episode length is controlled. Across all conditions, the contaminated baseline succeeds on only 3.3% of rollouts, and the two best curation methods close this to within 3 percentage points of the 93.3% oracle ceiling. Our results argue that curation methods should be evaluated by the policy they produce, not the defects they flag, and that any curation benchmark must control for episode length before reporting detection accuracy. We release the testbed, all metric implementations, and the evaluation pipeline.

Difference-Aware Retrieval Policies for Imitation Learning

Parametric imitation learning via behavior cloning can suffer from poor generalization to out-of-distribution states due to compounding errors during deployment. We show that reusing the training data during inference via a semi-parametric retrieval-based imitation learning approach can alleviate this challenge. We present Difference-Aware Retrieval Policies for Imitation Learning (DARP), a semi-parametric retrieval-based imitation learning approach that addresses this limitation by reparameterizing the imitation learning problem in terms of local neighborhood structure rather than direct state-to-action mappings. Instead of learning a global policy, DARP trains a model to predict actions based on $k$-nearest neighbors from expert demonstrations, their corresponding actions, and the relative distance vectors between neighbor states and query states. DARP requires no additional assumptions beyond those made for standard behavior cloning -- it does not require additional data collection, online expert feedback, or task-specific knowledge. We demonstrate consistent performance improvements of 15-46% over standard behavior cloning across diverse domains, including continuous control and robotic manipulation, and across different representations, including high-dimensional visual features. Code and demos are available at https://weirdlabuw.github.io/darp-site/.

When Life Gives You BC, Make Q-functions: Extracting Q-values from Behavior Cloning for On-Robot Reinforcement Learning

Behavior Cloning (BC) has emerged as a highly effective paradigm for robot learning. However, BC lacks a self-guided mechanism for online improvement after demonstrations have been collected. Existing offline-to-online learning methods often cause policies to replace previously learned good actions due to a distribution mismatch between offline data and online learning. In this work, we propose Q2RL, Q-Estimation and Q-Gating from BC for Reinforcement Learning, an algorithm for efficient offline-to-online learning. Our method consists of two parts: (1) Q-Estimation extracts a Q-function from a BC policy using a few interaction steps with the environment, followed by online RL with (2) Q-Gating, which switches between BC and RL policy actions based on their respective Q-values to collect samples for RL policy training. Across manipulation tasks from D4RL and robomimic benchmarks, Q2RL outperforms SOTA offline-to-online learning baselines on success rate and time to convergence. Q2RL is efficient enough to be applied in an on-robot RL setting, learning robust policies for contact-rich and high precision manipulation tasks such as pipe assembly and kitting, in 1-2 hours of online interaction, achieving success rates of up to 100% and up to 3.75x improvement against the original BC policy. Code and video are available at https://pages.rai-inst.com/q2rl_website/