Electric joint systems are significant elements of an underwater manipulator for its actuation, drive, and control. Working in an underwater environment, the joints suffer huge ambient pressure. To withstand it, the pressure compensation method is usually deployed, whereas the pressurized oil introduces sealing problems as well as parametric uncertainties and unknown disturbances for the dynamic model of the joint. To tackle these issues, this study proposes a design framework for the underwater oil-filled electric joint. The dynamics of the pressure compensation module is analyzed and the structure of the joint is optimized to seal the internal hydraulic oil. An uncertainty dynamic model of the oil-filled joint is established and a robust position controller is designed based on the structured singular value synthesis (mu-synthesis). Experimental results validate the feasibility of the proposed methods.
The high-angle-of-attack flip maneuver of reusable launch vehicles presents significant challenges for robust trajectory optimization due to the combined effects of highly nonlinear dynamics, aerodynamic uncertainties, and actuator saturation. This paper presents a differentiable physics framework for saturation-aware robust trajectory optimization. At its core, a Differentiable Particle Tube Control (DPTC) scheme is developed to optimize uncertainty evolution through an ensemble-based distribution shaping strategy. State uncertainty is represented by a Lagrangian particle ensemble, while hard actuator projection operators are embedded directly into the computational graph, enabling the joint optimization of the nominal feedforward trajectory and a time-varying feedback policy via end-to-end backpropagation. The proposed framework is evaluated against an automatic differentiation-based Successive Convexification (AD-SCvx) baseline combined with a conventional covariance steering feedback strategy. Six-degree-of-freedom Monte Carlo simulations demonstrate that, although the baseline achieves nominal fuel-optimal solutions, its unconstrained feedback formulation becomes susceptible to actuator saturation under aerodynamic disturbances, leading to degraded closed-loop robustness. In contrast, the proposed DPTC framework proactively performs a constraint-aware performance trade-off by relaxing spatial tracking to preserve critical control authority. These results demonstrate that integrating differentiable physics with ensemble-based optimization provides an effective and practical framework for robust guidance in highly constrained aerospace flight systems.
Yashdeep Chaudhary, Roberto Armellin, Harry Holt +1math.OC cs.LG eess.SY
This paper presents a distribution-agnostic robust trajectory-optimization framework based on chance-constrained reinforcement learning. The uncertainty is represented here through initial conditions and process noise, with the only requirement being that it can be sampled. A deterministic nominal trajectory is first computed offline, and reinforcement learning is then used only to robustify that baseline through a structured affine closed-loop correction law comprising a feedforward control adjustment and time-varying feedback gains. Probabilistic feasibility is enforced empirically through rollout-based upper-tail quantiles, while terminal dispersion is regulated through covariance-feasibility penalties. The framework is assessed on two materially different trajectory design problems. The flagship case study is a three-dimensional multi-impulse Earth-Mars transfer, where the learned policy is benchmarked against a recent robust trajectory-optimization reference under Gaussian uncertainty and then evaluated under bounded uniform uncertainty and under process disturbances not seen during training. The second case study is a stochastic atmospheric pinpoint rocket landing problem, used to assess portability to a short-horizon continuous-thrust setting with drag, mass depletion, and glide-slope constraints. The results show that the proposed framework can remain competitive in upper-tail fuel cost while preserving probabilistic feasibility, and that the same robustification scaffold can be carried across heterogeneous spacecraft trajectory planning problems without redesign of its core stochastic-control structure.
Multirotors are widely used in applications ranging from surveillance to precision agriculture, yet conventional designs remain limited by their under-actuation. Tilt-rotor configurations overcome this limitation by enabling full actuation. This paper investigates neural-network-based control strategies for a fully actuated tilt-rotor system with four thrust-vectoring inputs. Our work is structured in two parts. First, we deliberately present a negative result by evaluating a direct input-output control approach. In this method, multilayer perceptrons (MLPs), long short-term memory (LSTM) networks, and transformer models are trained to map system states and their desired values directly to control signals. We show that this strategy fails to stabilize the system, highlighting the inherent difficulty of applying direct input-output learning to highly unstable plants. Second, as the main contribution, we propose a neural-network-enhanced sliding mode controller (SMC). The method decomposes the system dynamics into input-independent and input-dependent components, with the former learned from a small dataset using lightweight networks, thereby reducing real-time computational demands. Moreover, the proposed method can be trained using flight logs collected from low-performance controllers, and the resulting dynamic model learned from real-world data can be used in simulation. We further compare MLP- and LSTM-based implementations under model uncertainties and external disturbances, demonstrating the robustness and effectiveness of the proposed approach; in particular, the controller with the LSTM plant dynamics predictor achieves superior performance to its MLP-based counterpart while also exhibiting lower runtime.